Spacetime triangle diagram technique explained

In physics and mathematics, the spacetime triangle diagram (STTD) technique, also known as the Smirnov method of incomplete separation of variables, is the direct space-time domain method for electromagnetic and scalar wave motion.

Basic stages

  1. (Electromagnetics) The system of Maxwell's equations is reduced to a second-order PDE for the field components, or potentials, or their derivatives.
  2. The spatial variables are separated using convenient expansions into series and/or integral transforms—except one that remains bounded with the time variable, resulting in a PDE of hyperbolic type.
  3. The resulting hyperbolic PDE and the simultaneously transformed initial conditions compose a problem, which is solved using the Riemann–Volterra integral formula. This yields the generic solution expressed via a double integral over a triangle domain in the bounded-coordinate—time space. Then this domain is replaced by a more complicated but smaller one, in which the integrant is essentially nonzero, found using a strictly formalized procedure involving specific spacetime triangle diagrams (see, e.g., Refs.[1] [2] [3]).
  4. In the majority of cases the obtained solutions, being multiplied by known functions of the previously separated variables, result in the expressions of a clear physical meaning (nonsteady-state modes). In many cases, however, more explicit solutions can be found summing up the expansions or doing the inverse integral transform.

STTD versus Green's function technique

The STTD technique belongs to the second among the two principal ansätze for theoretical treatment of waves - the frequency domain and the direct spacetime domain. The most well-established method for the inhomogeneous (source-related) descriptive equations of wave motion is one based on the Green's function technique.[4] For the circumstances described in Section 6.4 and Chapter 14 of Jackson's Classical Electrodynamics, it can be reduced to calculation of the wave field via retarded potentials (in particular, the Liénard–Wiechert potentials).

Despite certain similarity between Green's and Riemann–Volterra methods (in some literature the Riemann function is called the Riemann–Green function [5]), their application to the problems of wave motion results in distinct situations:

[7] [8] and it was the Riemann–Volterra representation that Smirnov used in his Course of Higher Mathematics to prove the uniqueness of the solution to the above problem (see, item 143).

t>0

, see more in and a particular example given below.)

are invoked. The Riemann-Volterra approach presents the same or even more serious difficulties, especially when one deals with the bounded-support sources: here the actual limits of integration must be defined from the system of inequalities involving the space-time variables and parameters of the source term. However, this definition can be strictly formalized using the spacetime triangle diagrams. Playing the same role as the Feynman diagrams in particle physics, STTDs provide a strict and illustrative procedure for definition of areas with the same analytic representation of the integration domain in the 2D space spanned by the non-separated spatial variable and time.

Drawbacks of the method

Most important concretizations

General considerations

Several efficient methods for scalarizing electromagnetic problems in the orthogonal coordinates

x1,x2,x3

were discussed by Borisov in Ref.[10] The most important conditions of their applicability are

h3=1

and

\partial3(h1/h2)=0

, where

hi,i=1,2,3

are the metric (Lamé) coefficients (so that the squared length element is

ds2=

2
h
1
2
dx
2
2
dx
3
2
dx
3
). Remarkably, this condition is met for the majority of practically important coordinate systems, including the Cartesian, general-type cylindrical and spherical ones.

For the problems of wave motion is free space, the basic method of separating spatial variables is the application of integral transforms, while for the problems of wave generation and propagation in the guiding systems the variables are usually separated using expansions in terms of the basic functions (modes) meeting the required boundary conditions at the surface of the guiding system.

Cartesian and cylindrical coordinates

\left\{x1=x,x2=y,x3=z\right\}

and general-type cylindrical coordinates

\left\{x1=x1(x,y),x2=x2(x,y),x3=z\right\}

separation of the spatial variables result in the initial value problem for a hyperbolic PDE known as the 1D Klein–Gordon equation (KGE)

\begin{align} &\left(

2
\partial
\tau

-

2
\partial
z

+k2\right)\psi(\tau,z)=f(\tau,z)\\ &\psi(\tau,z)=0for\tau<0 \end{align}

Here

\tau

is the time variable expressed in units of length using some characteristic velocity (e.g., speed of light or sound),

k

is a constant originated from the separation of variables, and

f(\tau,z)

represents a part of the sourceterm in the initial wave equation that remains after application of the variable-separation procedures (a series coefficient or a result ofan integral transform).

The above problem possesses known Riemann function

Rk(\tau,z;\tau',z')=J0\left(k\sqrt{(\tau-\tau')2-(z-z')2}\right),

where

J0()

is the Bessel function of the first kind of order zero.

Passing to the canonical variables

z,\tau\to\xi,η

one gets the simplest STTD diagram reflecting straightforward application of the Riemann–Volterra method, with the fundamental integration domain represented by spacetime triangle MPQ (in dark grey).

Rotation of the STTD 45° counter clockwise yields more common form of the STTD in the conventional spacetime

z,\tau

.

For the homogeneous initial conditions the (unique) solution of the problem is given by the Riemann formula

\psi(\tau,z)=

1
2

\iint\limits\triangled\tau'dz'R(\tau,z;\tau',z')f(\tau',z').

Evolution of the wave process can be traced using a fixed observation point (

z=const

) successively increasing the triangle height (

\tau

) or, alternatively, taking "momentary picture" of the wavefunction

\psi

by shifting the spacetime triangle along the

z

axis (

\tau=const

).

More useful and sophisticated STTDs correspond to pulsed sources whose support is limited in spacetime. Each limitation produce specific modifications in the STTD, resulting to smaller and more complicated integration domains in which theintegrand is essentially non-zero. Examples of most common modifications and their combined actions are illustrated below.

Spherical coordinates

In the spherical coordinate system — which in view of the General considerations must be represented in the sequence

\left\{x1=\theta,x2=\varphi,x3=r\right\}

, assuring

h3=1

— one can scalarize problems for the transverse electric (TE) or transverse magnetic (TM) waves using the Borgnis functions, Debye potentials or Hertz vectors. Subsequent separation of the angular variables

\theta,\varphi

via expansion of the initial wavefunction

\psi\left(\tau,\theta,\varphi,r\right)

and the source

f\left(\tau,\theta,\varphi,r\right)

in terms of

\left(\begin{array}{c} \sinm\varphi\\ \cosm\varphi \end{array}\right)

(m)
P
n

(\cos\theta),

where

(m)
P
n

\left(\right)

is the associated Legendre polynomial of degree

n

and order

m

, results in the initial value problem for the hyperbolic Euler–Poisson–Darboux equation

\begin{align} &\left(\partial

2
\tau

-\partial

2
r

+

n(n+1)
r2

\right)\psinm(\tau,r)=fnm(\tau,r)\\ &\psinm(\tau,r)=0for\tau<0 \end{align}

known to have the Riemann function

R(\tau,r;\tau',r')={Pn}\left(

r2+{r'
2

-(\tau-\tau')2}{2rr'}\right),

where

Pn\left(\right)

is the (ordinary) Legendre polynomial of degree

n

.

Equivalence of the STTD (Riemann) and Green's function solutions

The STTD technique represents an alternative to the classical Green's function method. Due to uniqueness of the solution to the initial value problem in question, in the particular case of zero initial conditions the Riemann solution provided by the STTD technique must coincide with the convolution of the causal Green's function and the source term.

The two methods provide apparently different descriptions of the wavefunction: e.g., the Riemann function to the Klein–Gordon problem is a Bessel function (which must be integrated, together with the source term, over the restricted area represented by the fundamental triangle MPQ) while the retarded Green's function to the Klein–Gordon equation is a Fourier transform of the imaginary exponential term (to be integrated over the entire plane

z',\tau'

, see, for example, Sec. 3.1. of Ref.[11]) reducible to

Gk(\tau,z;\tau',z')=-

1
(2\pi)2
infty
\int\limits
-infty

dp{\rme}ip(z

infty
\int\limits
-infty

d\Omega

{\rme
i\Omega(\tau
}.

Extending integration with respect to

\Omega

to the complex domain, using the residue theorem (with the poles

\Omega1,2

chosen as

\lim\varepsilon\left(\pm\sqrt{p2+k2+i\varepsilon}\right)

to satisfy the causality conditions
) one gets

Gk(\tau,z;\tau',z')=

1
\pi
infty
\int\limits
0

dp

{\sin\left((\tau-\tau')\sqrt{p2+k2
\right)}}{\sqrt

{p2+k2}} \cos(p(z-z')).

Using formula 3.876-1 of Gradshteyn and Ryzhik,[12]

infty
\int\limits
0

dx

\sin(p\sqrt{x2+a2
)}{\sqrt

{x2+a2}}\cos(bx)=\left\{\begin{align} &

\pi
2

J0(a\sqrt{p2-b2})&for&0<b<p\\ &0&for&b>p>0 \end{align} \right.    (a>0),

the last Green's function representation reduces to the expression[13]

1
2

J0\left(k\sqrt{(\tau-\tau')2-(z-z')2}\right) h(\tau-\tau'-|z-z'|),

in which 1/2 is the scaling factor of the Riemann formula and

J0()

the Riemann function, while the Heaviside step function

h()

reduces, for

\tau>0

, the area of integration to the fundamental triangle MPQ, making the Green's function solution equal to that provided by the STTD technique.

References and notes

  1. A.B. Utkin, Localized Waves Emanated by Pulsed Sources: The Riemann–Volterra Approach. In: Hugo E. Hernández-Figueroa, Erasmo Recami, and Michel Zamboni-Rached (eds.) Non-diffracting Waves. Wiley-VCH: Berlin,, pp. 287–306 (2013)
  2. A.B. Utkin, The Riemann–Volterra time-domain technique for waveguides: A case study for elliptic geometry. Wave Motion 49(2), 347–363 (2012), doi: 10.1016/j.wavemoti.2011.12.001
  3. V.V. Borisov, A.V. Manankova, A.B. Utkin, Spherical harmonic representation of the electromagnetic field produced by a moving pulse of current density, Journal of Physics A: Mathematical and General 29(15), 4493–4514 (1996), doi: 10.1088/0305-4470/29/15/020
  4. J. D. Jackson, Classical Electrodynamics, 3rd ed., Wiley, New York (1999)
  5. see, e.g., G. A. Korn and T. M. Korn, Mathematical Handbook for Scientists and Engineers, Courier Dover Publications, New York (2000)
  6. A comprehensive discussion of this subject can found in H. Kleinert, Path Integrals in Quantum Mechanics, Statistics, Polymer Physics, and Financial Markets, 5th ed., World Scientific, Singapore (2009)
  7. R. Courant and D. Hilbert, Methods of Mathematical Physics, Vol. 2, Wiley, New York (1989)
  8. V.I. Smirnov, A Course of Higher Mathematics, Vol. 4: Integral Equations and Partial Differential Equations, Pergamon Press, Oxford (1964)
  9. C.J. Chapman, The spiral Green function in acoustics and electromagnetism, Proc. Roy. Soc. A 431(1881), 157–167 (1990), doi: 10.1098/rspa.1990.0124
  10. V.V. Borisov, Electromagnetic Fields of Transient Currents. Leningrad State University Press: Leningrad (1996, in Russian)
  11. W. Geyi, A time-domain theory of waveguide, Progress in Electromagnetics Research 59, 267–297 (2006), doi: 10.2528/PIER05102102
  12. Book: Izrail Solomonovich . Gradshteyn . Izrail Solomonovich Gradshteyn . Iosif Moiseevich . Ryzhik . Iosif Moiseevich Ryzhik . Yuri Veniaminovich . Geronimus . Yuri Veniaminovich Geronimus . Michail Yulyevich . Tseytlin . Michail Yulyevich Tseytlin . Alan . Jeffrey . Daniel . Zwillinger . Victor Hugo . Moll . Victor Hugo Moll . Scripta Technica, Inc. . Table of Integrals, Series, and Products . . 2015 . October 2014 . 8th . English . 978-0-12-384933-5 . 2014010276 . 2016-02-21-->. Gradshteyn and Ryzhik . 3.876. . 486.
  13. Apparently this result was first published by Geyi (2006: 275), merely as a way to simplify the Green's solution and reduce the domain of integration.