A solar telescope or a solar observatory is a special-purpose telescope used to observe the Sun. Solar telescopes usually detect light with wavelengths in, or not far outside, the visible spectrum. Obsolete names for Sun telescopes include heliograph and photoheliograph.
Solar telescopes need optics large enough to achieve the best possible diffraction limit but less so for the associated light-collecting power of other astronomical telescopes. However, recently newer narrower filters and higher framerates have also driven solar telescopes towards photon-starved operations.[1] Both the Daniel K. Inouye Solar Telescope as well as the proposed European Solar Telescope (EST) have larger apertures not only to increase the resolution, but also to increase the light-collecting power.
Because solar telescopes operate during the day, seeing is generally worse than for night-time telescopes, because the ground around the telescope is heated, which causes turbulence and degrades the resolution. To alleviate this, solar telescopes are usually built on towers and the structures are painted white. The Dutch Open Telescope is built on an open framework to allow the wind to pass through the complete structure and provide cooling around the telescope's main mirror.
Another solar telescope-specific problem is the heat generated by the tightly-focused sunlight. For this reason, a heat stop is an integral part of the design of solar telescopes. For the Daniel K. Inouye Solar Telescope, the heat load is 2.5 MW/m2, with peak powers of 11.4 kW.[2] The goal of such a heat stop is not only to survive this heat load, but also to remain cool enough not to induce any additional turbulence inside the telescope's dome.
Professional solar observatories may have main optical elements with very long focal lengths (although not always, Dutch Open Telescope) and light paths operating in a vacuum or helium to eliminate air motion due to convection inside the telescope. However, this is not possible for apertures over 1 meter, at which the pressure difference at the entrance window of the vacuum tube becomes too large. Therefore, the Daniel K. Inouye Solar Telescope and the EST have active cooling of the dome to minimize the temperature difference between the air inside and outside the telescope.
Due to the sun's narrow path across the sky, some solar telescopes are fixed in position (and are sometimes buried underground), with the only moving part being a heliostat to track the Sun. One example of this is the McMath-Pierce Solar Telescope.
The Sun, being the closest star to earth, allows a unique chance to study stellar physics with high-resolution. It was, until the 1990s,[3] the only star whose surface had been resolved. General topics that interest a solar astronomer are its 11-year periodicity (i.e., the Solar Cycle), sunspots, magnetic field activity (see solar dynamo), solar flares, coronal mass ejections, differential rotation, and plasma physics.
Most solar observatories observe optically at visible, UV, and near infrared wavelengths, but other solar phenomena can be observed — albeit not from the Earth's surface due to the absorption of the atmosphere:
In the field of amateur astronomy there are many methods used to observe the Sun. Amateurs use everything from simple systems to project the Sun on a piece of white paper, light blocking filters, Herschel wedges which redirect 95% of the light and heat away from the eyepiece,[4] up to hydrogen-alpha filter systems and even home built spectrohelioscopes. In contrast to professional telescopes, amateur solar telescopes are usually much smaller.
With a conventional telescope, an extremely dark filter at the opening of the primary tube is used to reduce the light of the sun to tolerable levels. Since the full available spectrum is observed, this is known as "white-light" viewing, and the opening filter is called a "white-light filter". The problem is that even reduced, the full spectrum of white light tends to obscure many of the specific features associated with solar activity, such as prominences and details of the chromosphere (i.e., the surface). Specialized solar telescopes facilitate clear observation of such H-alpha emissions by using a bandwidth filter implemented with a Fabry-Perot etalon.[5]
A solar tower is a structure used to support equipment for studying the Sun, and is typically part of solar telescope designs. Solar tower observatories are also called vacuum tower telescopes. Solar towers are used to raise the observation equipment above atmospheric turbulence caused by solar heating of the ground and the radiation of the heat into the atmosphere. Traditional observatories do not have to be placed high above ground level, as they do most of their observation at night, when ground radiation is at a minimum.
The horizontal Snow solar observatory was built on Mount Wilson in 1904. It was soon found that heat radiation was disrupting observations. Almost as soon as the Snow Observatory opened, plans were started for a 60adj=midNaNadj=mid tower that opened in 1908 followed by a 150feet tower in 1912. The 60-foot tower is currently used to study helioseismology, while the 150-foot tower is active in UCLA's Solar Cycle Program.
The term has also been used to refer to other structures used for experimental purposes, such as the Solar Tower Atmospheric Cherenkov Effect Experiment (STACEE), which is being used to study Cherenkov radiation, and the Weizmann Institute solar power tower.
Other solar telescopes that have solar towers are Richard B. Dunn Solar Telescope, Solar Observatory Tower Meudon and others.
See also: List of solar telescopes.