Nonlinear optics (NLO) is the branch of optics that describes the behaviour of light in nonlinear media, that is, media in which the polarization density P responds non-linearly to the electric field E of the light. The non-linearity is typically observed only at very high light intensities (when the electric field of the light is >108 V/m and thus comparable to the atomic electric field of ~1011 V/m) such as those provided by lasers. Above the Schwinger limit, the vacuum itself is expected to become nonlinear. In nonlinear optics, the superposition principle no longer holds.
The first nonlinear optical effect to be predicted was two-photon absorption, by Maria Goeppert Mayer for her PhD in 1931, but it remained an unexplored theoretical curiosity until 1961 and the almost simultaneous observation of two-photon absorption at Bell Labs[1] and the discovery of second-harmonic generation by Peter Franken et al. at University of Michigan, both shortly after the construction of the first laser by Theodore Maiman.[2] However, some nonlinear effects were discovered before the development of the laser.[3] The theoretical basis for many nonlinear processes was first described in Bloembergen's monograph "Nonlinear Optics".[4]
Nonlinear optics explains nonlinear response of properties such as frequency, polarization, phase or path of incident light.[2] These nonlinear interactions give rise to a host of optical phenomena:
\chi(3)
\chi(3)
In these processes, the medium has a linear response to the light, but the properties of the medium are affected by other causes:
Nonlinear effects fall into two qualitatively different categories, parametric and non-parametric effects. A parametric non-linearityis an interaction in which the quantum state of the nonlinear material is not changed by the interaction with the optical field. As a consequence of this, the process is "instantaneous". Energy and momentum are conserved in the optical field, making phase matching important and polarization-dependent.[12]
Parametric and "instantaneous" (i.e. material must be lossless and dispersionless through the Kramers–Kronig relations) nonlinear optical phenomena, in which the optical fields are not too large, can be described by a Taylor series expansion of the dielectric polarization density (electric dipole moment per unit volume) P(t) at time t in terms of the electric field E(t):
P(t)=\varepsilon0\left(\chi(1)E(t)+\chi(2)E2(t)+\chi(3)E3(t)+\ldots\right),
Central to the study of electromagnetic waves is the wave equation. Starting with Maxwell's equations in an isotropic space, containing no free charge, it can be shown that
\nabla x \nabla x E+
n2 | |
c2 |
\partial2 | |
\partialt2 |
E =-
1 | |
\varepsilon0c2 |
\partial2 | |
\partialt2 |
PNL,
Note that one can normally use the vector identity
\nabla x \left(\nabla x V\right)=\nabla\left(\nabla ⋅ V\right)-\nabla2V
\rhofree=0
\nabla ⋅ D=0,
\nabla2E-
n2 | |
c2 |
\partial2 | |
\partialt2 |
E=0.
\nabla ⋅ E=0
\nabla2E-
n2 | |
c2 |
\partial2 | |
\partialt2 |
E =
1 | |
\varepsilon0c2 |
\partial2 | |
\partialt2 |
PNL.
The nonlinear wave equation is an inhomogeneous differential equation. The general solution comes from the study of ordinary differential equations and can be obtained by the use of a Green's function. Physically one gets the normal electromagnetic wave solutions to the homogeneous part of the wave equation:
\nabla2E-
n2 | |
c2 |
\partial2 | |
\partialt2 |
E=0,
1 | |
\varepsilon0c2 |
\partial2 | |
\partialt2 |
PNL
In general, an n-th order nonlinearity will lead to (n + 1)-wave mixing. As an example, if we consider only a second-order nonlinearity (three-wave mixing), then the polarization P takes the form
PNL=\varepsilon0\chi(2)E2(t).
E(t)=E1\cos(\omega1t)+E2\cos(\omega2t),
E(t)=
1 | |
2 |
E1
-i\omega1t | |
e |
+
1 | |
2 |
E2
-i\omega2t | |
e |
+c.c.,
\begin{align} PNL &=\varepsilon0\chi(2)E2(t)\\[3pt] &=
\varepsilon0 | |
4 |
\chi(2)
2 | |
\left[{E | |
1} |
-i2\omega1t | |
e |
+
2 | |
{E | |
2} |
-i2\omega2t | |
e |
+2E1E2
-i(\omega1+\omega2)t | |
e |
+2E1
* | |
{E | |
2} |
-i(\omega1-\omega2)t | |
e |
+
2 | |
\left(\left|E | |
1\right| |
+
2\right)e | |
\left|E | |
2\right| |
0+c.c.\right], \end{align}
Note: Parametric generation and amplification is a variation of difference-frequency generation, where the lower frequency of one of the two generating fields is much weaker (parametric amplification) or completely absent (parametric generation). In the latter case, the fundamental quantum-mechanical uncertainty in the electric field initiates the process.
The above ignores the position dependence of the electrical fields. In a typical situation, the electrical fields are traveling waves described by
Ej(x,t)=Ej,0
i(kj ⋅ x-\omegajt) | |
e |
+c.c.
at position
x
\|kj\|=n(\omegaj)\omegaj/c
c
n(\omegaj)
\omegaj
\omega3=\omega1+\omega2
P(2)(x,t)\propto
n1 | |
E | |
1 |
n2 | |
E | |
2 |
i[(k1+k2) ⋅ x-\omega3t] | |
e |
+c.c.
At each position
x
\omega3
\|k3\|=n(\omega3)\omega3/c
\omega3
\vec{k
The above equation is known as the phase-matching condition. Typically, three-wave mixing is done in a birefringent crystalline material, where the refractive index depends on the polarization and direction of the light that passes through. The polarizations of the fields and the orientation of the crystal are chosen such that the phase-matching condition is fulfilled. This phase-matching technique is called angle tuning. Typically a crystal has three axes, one or two of which have a different refractive index than the other one(s). Uniaxial crystals, for example, have a single preferred axis, called the extraordinary (e) axis, while the other two are ordinary axes (o) (see crystal optics). There are several schemes of choosing the polarizations for this crystal type. If the signal and idler have the same polarization, it is called "type-I phase matching", and if their polarizations are perpendicular, it is called "type-II phase matching". However, other conventions exist that specify further which frequency has what polarization relative to the crystal axis. These types are listed below, with the convention that the signal wavelength is shorter than the idler wavelength.
Polarizations | Scheme | |||
---|---|---|---|---|
Pump | Signal | Idler | ||
e | o | o | Type I | |
e | o | e | Type II (or IIA) | |
e | e | o | Type III (or IIB) | |
e | e | e | Type IV | |
o | o | o | Type V (or type 0,[13] or "zero") | |
o | o | e | Type VI (or IIB or IIIA) | |
o | e | o | Type VII (or IIA or IIIB) | |
o | e | e | Type VIII (or I) |
One undesirable effect of angle tuning is that the optical frequencies involved do not propagate collinearly with each other. This is due to the fact that the extraordinary wave propagating through a birefringent crystal possesses a Poynting vector that is not parallel to the propagation vector. This would lead to beam walk-off, which limits the nonlinear optical conversion efficiency. Two other methods of phase matching avoid beam walk-off by forcing all frequencies to propagate at a 90° with respect to the optical axis of the crystal. These methods are called temperature tuning and quasi-phase-matching.
Temperature tuning is used when the pump (laser) frequency polarization is orthogonal to the signal and idler frequency polarization. The birefringence in some crystals, in particular lithium niobate is highly temperature-dependent. The crystal temperature is controlled to achieve phase-matching conditions.
The other method is quasi-phase-matching. In this method the frequencies involved are not constantly locked in phase with each other, instead the crystal axis is flipped at a regular interval Λ, typically 15 micrometres in length. Hence, these crystals are called periodically poled. This results in the polarization response of the crystal to be shifted back in phase with the pump beam by reversing the nonlinear susceptibility. This allows net positive energy flow from the pump into the signal and idler frequencies. In this case, the crystal itself provides the additional wavevector k = 2π/Λ (and hence momentum) to satisfy the phase-matching condition. Quasi-phase-matching can be expanded to chirped gratings to get more bandwidth and to shape an SHG pulse like it is done in a dazzler. SHG of a pump and self-phase modulation (emulated by second-order processes) of the signal and an optical parametric amplifier can be integrated monolithically.
The above holds for
\chi(2)
\chi(3)
\chi(3)
\chi(3)
\chi(2)
The Kerr effect can be described as a
\chi(3)
One of the most commonly used frequency-mixing processes is frequency doubling, or second-harmonic generation. With this technique, the 1064 nm output from Nd:YAG lasers or the 800 nm output from Ti:sapphire lasers can be converted to visible light, with wavelengths of 532 nm (green) or 400 nm (violet) respectively.[16]
Practically, frequency doubling is carried out by placing a nonlinear medium in a laser beam. While there are many types of nonlinear media, the most common media are crystals. Commonly used crystals are BBO (β-barium borate), KDP (potassium dihydrogen phosphate), KTP (potassium titanyl phosphate), and lithium niobate. These crystals have the necessary properties of being strongly birefringent (necessary to obtain phase matching, see below), having a specific crystal symmetry, being transparent for both the impinging laser light and the frequency-doubled wavelength, and having high damage thresholds, which makes them resistant against the high-intensity laser light.
It is possible, using nonlinear optical processes, to exactly reverse the propagation direction and phase variation of a beam of light. The reversed beam is called a conjugate beam, and thus the technique is known as optical phase conjugation[17] [18] (also called time reversal, wavefront reversal and is significantly different from retroreflection).
A device producing the phase-conjugation effect is known as a phase-conjugate mirror (PCM).
One can interpret optical phase conjugation as being analogous to a real-time holographic process.[19] In this case, the interacting beams simultaneously interact in a nonlinear optical material to form a dynamic hologram (two of the three input beams), or real-time diffraction pattern, in the material. The third incident beam diffracts at this dynamic hologram, and, in the process, reads out the phase-conjugate wave. In effect, all three incident beams interact (essentially) simultaneously to form several real-time holograms, resulting in a set of diffracted output waves that phase up as the "time-reversed" beam. In the language of nonlinear optics, the interacting beams result in a nonlinear polarization within the material, which coherently radiates to form the phase-conjugate wave.
Reversal of wavefront means a perfect reversal of photons' linear momentum and angular momentum. The reversal of angular momentum means reversal of both polarization state and orbital angular momentum. Reversal of orbital angular momentum of optical vortex is due to the perfect match of helical phase profiles of the incident and reflected beams. Optical phase conjugation is implemented via stimulated Brillouin scattering, four-wave mixing, three-wave mixing, static linear holograms and some other tools.
The most common way of producing optical phase conjugation is to use a four-wave mixing technique, though it is also possible to use processes such as stimulated Brillouin scattering.
For the four-wave mixing technique, we can describe four beams (j = 1, 2, 3, 4) with electric fields:
\Xij(x,t)=
1 | |
2 |
Ej(x)
i\left(\omegajt-k ⋅ x\right) | |
e |
+c.c.,
where Ej are the electric field amplitudes. Ξ1 and Ξ2 are known as the two pump waves, with Ξ3 being the signal wave, and Ξ4 being the generated conjugate wave.
If the pump waves and the signal wave are superimposed in a medium with a non-zero χ(3), this produces a nonlinear polarization field:
PNL=\varepsilon0\chi(3)(\Xi1+\Xi2+
3, | |
\Xi | |
3) |
resulting in generation of waves with frequencies given by ω = ±ω1 ± ω2 ± ω3 in addition to third-harmonic generation waves with ω = 3ω1, 3ω2, 3ω3.
As above, the phase-matching condition determines which of these waves is the dominant. By choosing conditions such that ω = ω1 + ω2 − ω3 and k = k1 + k2 − k3, this gives a polarization field:
P\omega=
1 | |
2 |
\chi(3)\varepsilon0E1E2
* | |
E | |
3 |
ei(\omega+c.c.
This is the generating field for the phase-conjugate beam, Ξ4. Its direction is given by k4 = k1 + k2 − k3, and so if the two pump beams are counterpropagating (k1 = −k2), then the conjugate and signal beams propagate in opposite directions (k4 = −k3). This results in the retroreflecting property of the effect.
Further, it can be shown that for a medium with refractive index n and a beam interaction length l, the electric field amplitude of the conjugate beam is approximated by
E4=
i\omegal | |
2nc |
\chi(3)E1E2
*, | |
E | |
3 |
where c is the speed of light. If the pump beams E1 and E2 are plane (counterpropagating) waves, then
E4(x)\propto
*(x), | |
E | |
3 |
that is, the generated beam amplitude is the complex conjugate of the signal beam amplitude. Since the imaginary part of the amplitude contains the phase of the beam, this results in the reversal of phase property of the effect.
Note that the constant of proportionality between the signal and conjugate beams can be greater than 1. This is effectively a mirror with a reflection coefficient greater than 100%, producing an amplified reflection. The power for this comes from the two pump beams, which are depleted by the process.
The frequency of the conjugate wave can be different from that of the signal wave. If the pump waves are of frequency ω1 = ω2 = ω, and the signal wave is higher in frequency such that ω3 = ω + Δω, then the conjugate wave is of frequency ω4 = ω − Δω. This is known as frequency flipping.
In classical Maxwell electrodynamics a phase-conjugating mirror performs reversal of the Poynting vector:
Sout(r,t)=-Sin(r,t),
("in" means incident field, "out" means reflected field) where
S(r,t)=\epsilon0c2E(r,t) x B(r,t),
L(r,t)=r x S(r,t)
Lout(r,t)=-Lin(r,t).
The above identities are valid locally, i.e. in each space point
r
t
In quantum electrodynamics the photon with energy
\hbar\omega
P=\hbark
Lz=\pm\hbar\ell
\ell
z
\pm\hbar\ell
In quantum electrodynamics the interpretation of phase conjugation is much simpler compared to classical electrodynamics. The photon reflected from phase conjugating-mirror (out) has opposite directions of linear and angular momenta with respect to incident photon (in):
\begin{align} Pout&=-\hbark=-Pin=\hbark,\\ {Lz
Optical fields transmitted through nonlinear Kerr media can also display pattern formation owing to the nonlinear medium amplifying spatial and temporal noise. The effect is referred to as optical modulation instability.[10] This has been observed both in photo-refractive,[22] photonic lattices,[23] as well as photo-reactive systems.[24] [25] [26] [27] In the latter case, optical nonlinearity is afforded by reaction-induced increases in refractive index.[28] Examples of pattern formation are spatial solitons and vortex lattices in framework of nonlinear Schrödinger equation.[29] [30]
The early studies of nonlinear optics and materials focused on the inorganic solids. With the development of nonlinear optics, molecular optical properties were investigated, forming molecular nonlinear optics.[31] The traditional approaches used in the past to enhance nonlinearities include extending chromophore π-systems, adjusting bond length alternation, inducing intramolecular charge transfer, extending conjugation in 2D, and engineering multipolar charge distributions. Recently, many novel directions were proposed for enhanced nonlinearity and light manipulation, including twisted chromophores, combining rich density of states with bond alternation, microscopic cascading of second-order nonlinearity, etc. Due to the distinguished advantages, molecular nonlinear optics have been widely used in the biophotonics field, including bioimaging,[32] [33] phototherapy,[34] biosensing,[35] etc.
Connecting bulk properties to microscopic properties
Molecular nonlinear optics relate optical properties of bulk matter to their microscopic molecular properties. Just as the polarizability can be described as a Taylor series expansion, one can expand the induced dipole moment in powers of the electric field:
\boldsymbol{\mu}=\boldsymbol{\mu | ||||
|
\beta:\boldsymbol{\Epsilon}\boldsymbol{\Epsilon}
Novel Nonlinear Media
Certain molecular materials have the ability to be optimized for their optical nonlinearity at the microscopic and bulk levels. Due to the delocalization of electrons in π bonds electrons are more easily responsive to applied optical fields and tend to produce larger linear and nonlinear optical responses than those in single bonds. In these systems linear response scales with the length of the conjugated pi system, while nonlinear response scales even more rapidly.One of the many applications of molecular nonlinear optics is the use in nonlinear bioimaging. These nonlinear materials, like multi-photon chromophores, are used as biomarkers for two-photon spectroscopy, in which the attenuation of incident light intensity as it passes through the sample is written as
{-dI\overdx}={N\deltaI2\over\hbar\omega}
where N is the number of particles per unit volume, I is intensity of light, and δ is the two photon absorption cross section. The resulting signal adopts a Lorentzian lineshape with a cross-section proportional to the difference in dipole moments of ground and final states.
Similar highly conjugated chromophores with strong donor-acceptor characteristics are used due to their large difference in the dipole moments, and current efforts in extending their pi-conjugated systems to enhance their nonlinear optical properties are being made.
See also: Second-harmonic generation.
Ordered by pump wavelength: