A muscle car is an American-made two-door sports coupe with a powerful engine, generally designed for high-performance driving.[1] [2]
In 1949, General Motors introduced its 88 with the company's 303cuin OHV Rocket V8 engine, which was previously available only in its luxury Oldsmobile 98. This formula of putting a maker's largest, most powerful engine in a smaller, lighter, more affordable vehicle evolved into the "muscle car" category.[3] [4] Chrysler and Ford quickly followed suit with the Chrysler Saratoga and the Lincoln Capri.[5]
The term "muscle car", which appeared in the mid-1960s, was originally applied to "performance"-oriented street cars produced to fill a newly recognized niche; it entered the general vocabulary through car magazines and automobile marketing and advertising. By the early 1970s, muscle cars included special editions of mass-production cars designed for street and track drag racing.[6] The concept of high performance at lower prices was exemplified by the 1968 Plymouth Road Runner and companion Dodge Super Bee, whose powerful engines drove relatively basic-trimmed intermediate-sized cars that were meant to undercut more expensive, more stylish, and better-appointed models from General Motors and Ford that had come to define the market, such as the Pontiac GTO (1964), 396 Chevrolet Chevelle (1965), 400 Buick Gran Sport (1965), 400 Oldsmobile 442 (1965), as well as the 427 Mercury Comet Cyclone (1964) and 390 Mercury Cyclone (1966).
By some definitions – including those used by Car and Driver, CNBC, Road & Track, and Motor Trend—pony cars such as the Ford Mustang, Chevrolet Camaro, Plymouth Barracuda, Pontiac Firebird, AMC Javelin, and their luxury companions in that large, influential, and lucrative 1960s–70s niche, the Mercury Cougar and Dodge Challenger, could also qualify as "muscle cars" if outfitted with suitable high-performance equipment.
The definition of a muscle car is subjective and endlessly debated,[7] [8] resulting in the term having few universally agreed characteristics:[7] [9] [10] [11] [12] [13] [14]
High-powered pony cars are sometimes considered muscle cars,[7] as by the above-mentioned publications, with some exceptional personal luxury cars also regarded by some as qualifying on their merits. In the opposite direction, by the late 1960s a wave of inexpensive, straight-line speed oriented stripped down intermediate sedans offered at prices under as [17] expanded the original definition from a "muscle car" as one offering both performance and some measure of style, accessories, and cachet, and doubled it back toward the drag strip focus[18] of such exceptional early proto-muscle cars as the limited production, factory experimental 1964 Ford Fairlane Thunderbolt.
Sports cars - including those which meet all the above most basic criterion, such as the 1969 ZL-1 Corvette, with an all-aluminum V8 listed at but reported to produce, that slung the car through the NaNmiles traps in 10.89 seconds[19] - are considered muscle cars by some,[20] and not by others. Drag strip-oriented fans see muscle cars as an extension of the hot rodding philosophy of taking a small car and putting a large-displacement engine in it to maximize straight-line speed.[21] However, widespread public acceptance and use of the term, including that exemplified by the Car and Driver, CNBC, Road & Track, and Motor Trend top muscle car lists below, affirm a much broader interpretation as the norm.
Muscle cars were initially referred to as "supercars" in the United States,[22] such as the 1957 Rambler Rebel, which was described as a "potent mill turned the lightweight Rambler into a veritable supercar."[23] From the mid-1960s to the mid-1970s, "dragstrip bred" mid-size cars equipped with large V8 engines and rear-wheel drive were also referred to as supercars, more often than muscle cars.[24] [25] [26]
In 1966, the supercar became an "industry trend".[27] This was when the four domestic automakers "needed to cash in on the supercar market" with eye-catching, heart-stopping cars.[28] An example of the use of the supercar description for early muscle car models includes the May 1965 Car Life road test of the Pontiac GTO, followed in 1968 with a Car and Driver review of the 1969 American Motors SC/Rambler describing it as ready to compete in "the Supercar street racer gang" market segment,[29] with the initials "SC" signifying SuperCar,[30] and a 1969 Car Life review that included how "Hurst puts American Motors into the Supercar club with the 390 Rogue".[31] The supercar market segment in the U.S. at the time included unique versions of regular production models[32] that were positioned in several sizes and market segments (such as the "economy supercar"[33]), as well as limited edition, documented dealer-converted vehicles.[34] However, over time the term came to be applied to much, much more expensive and exotic cars, which claimed the name supercar.
Opinions on the origin of the muscle car vary, but the 1949 Oldsmobile Rocket 88 is cited as the first full-sized muscle car.[35] The Rocket 88 was the first time a powerful V8 engine was available in a smaller and lighter body style (in this case the 3031NaN1 engine from the larger Oldsmobile 98 with the body from the six-cylinder Oldsmobile 76).[36] The Rocket 88 produced 1350NaN0 at 3600 rpm and 2630NaN0 at 1800 rpm and won eight out of ten races in the 1950 NASCAR season. The Rocket 88's Oldsmobile 303 V8 engine, along with the Cadillac 331 engine, also introduced in 1949, are stated to have "launched the modern era of the high-performance V-8."[37]
In 1955, the large-sized Chrysler C-300 - the first in a long, 15-year series of large, expensive, performance-first Chryslers - was introduced that produced 3000NaN0 from its 3311NaN1 V8 engine, and it was advertised as "America's Most Powerful Car".[36] Capable of accelerating from 0 to 60mi/h in 9.8 seconds and reaching 130mph, the 1955 Chrysler 300 is also recognized as one of the best-handling cars of its era.[38]
The compact-sized 1956 Studebaker Golden Hawk was powered by a 2750NaN0 3521NaN1 Packard V8, the second most powerful engine to the Chrysler 300.[39]
The Rambler Rebel, introduced by American Motors Corporation (AMC) in 1957, is the first mid-sized car to be available with a big-block V8 engine.[39] The Rebel followed most of the muscle car formula including "make 'em go fast as well as cheaply."[40] It is therefore considered by some to be the first muscle car.[41] [40] With a 3271NaN1 V8 engine producing 2550NaN0, its 0–60 mph acceleration of 7.5 seconds made it the fastest stock American sedan at the time.[42] Only the fuel-injected Chevrolet Corvette beat it by half a second.[43]
The popularity and performance of muscle cars grew in the early 1960s. This was when Mopar (Dodge, Plymouth, and Chrysler) and Ford battled for supremacy in drag racing. The 1961 Chevrolet Impala offered an SS package for $53.80, which consisted of a 4091NaN1 V8 engine producing 4250NaN0 along with upgraded brakes, tires, and suspension. The 1962 Dodge Dart 413 (nicknamed Max Wedge) had a 4131NaN1 V8 which produced 4200NaN0 and could cover the quarter-mile in under 13 seconds.[44] [45] [46]
In 1963, two hundred Ford Galaxie "R-code" cars were factory-built specifically for drag racing, resulting in a full-size car that could cover the quarter-mile in a little over 12 seconds.[47] Upgrades included fiberglass panels, aluminum bumpers, traction bars, and a 4271NaN1 Ford FE-based racing engine conservatively rated at 4250NaN0. The road-legal version of the Galaxie 427 used the "Q-code" engine which produced 4100NaN0.[48] [49] The following year, Ford installed the proven 427 "top-oiler" engine in the smaller and lighter Fairlane body, creating the Ford Thunderbolt. The Thunderbolt included several weight-saving measures (including acrylic windows and fibreglass/aluminium body panels and bumpers)[50] and a stock Thunderbolt could cover the quarter-mile in 11.76 seconds.[51] The Thunderbolt was technically road-legal, however, it was considered unsuitable even "for driving to and from the (drag)strip, let alone on the street in everyday use".[51] A total of 111 Thunderbolts were built.[52]
The General Motors competitor to the Thunderbolt was the Z-11 option package for the full-size Chevrolet Impala coupe, of which 57 examples were produced in 1963 only.[53] The Z-11 Impala was powered by a 4271NaN1 version of the W-series big-block engine, which was officially rated at 4300NaN0. With a compression ratio of 13.5:1, the engine required high-octane fuel. The RPOZ-11 package also included weight reduction measures such as an aluminum hood and fenders, the removal of sound-deadening material as well as the deletion of the heater and radio.
In 1964, a drag racing version of the Dodge 330 was created, called the "330 Lightweight".[54] [55] [56] It was powered by a 4261NaN1 version of the Hemi racing engine which was official rated at 4250NaN0, but rumored to have an actual power output higher than this.[57] Weight reduction measures included an aluminium hood as well as lightweight front bumpers, fenders and doors, polycarbonate side windows, and no sound deadening. Like other lightweights of the era, it came with a factory disclaimer: "Designed for supervised acceleration trials. Not recommended for general everyday driving because of the compromises in the all-round characteristics which must be made for this type of vehicle."[50]
Also using the 426 Hemi racing engine was the limited production 1965 Plymouth Satellite 426 Hemi. In 1966, the racing version of the 426 Hemi was replaced by a detuned "Street Hemi" version, also with a size of 426 cu in and an official power rating of 4250NaN0). The 1966 Plymouth Satellite 426 Hemi could run a 13.8-second quarter-mile at 104mph and had a base price of $3,850.[58]
Although pure muscle cars often sold in relatively small volumes, manufacturers valued the halo effect of the publicity created by these models. Competition between manufacturers led to a horsepower war that peaked in 1970, with models such as the LS-6 Chevelle advertising as much as 4500NaN0.[59]
The Pontiac GTO, a car that captured the public mind and strongly influenced the muscle car era, was introduced in 1964 as an optional package for the intermediate-size Pontiac Tempest. The GTO was developed by Pontiac division president John DeLorean and was initially powered by a 3891NaN1 V8 engine producing 3250NaN0. The success of the GTO led other GM divisions to develop muscle cars based on intermediate-sized platforms: the 1964 Oldsmobile 442, 1964 Chevrolet Chevelle SS, and 1965 Buick Gran Sport.
The AMC V8 engine was enlarged to 3901NaN1 in 1968,[60] which produced 3150NaN0 and was first used in the 1968 AMC Rebel SST,[61] AMC Javelin Go-package, and AMC AMX.[62] [63] AMC was a car manufacturing company that made these two incredible cars. AMC only made small economy cars until they hired Dick Teague as a designer, who later became the vice president. AMC was not known as a muscle car maker, but the new AMX and AMC Javelin became top competitors.[64]
As the 1960s progressed, optional equipment and luxury appointments increased in many popular models of "performance-oriented" cars. With the added weight and power-consuming accessories and features, engines had to be more powerful to maintain performance levels, and the cars became more expensive. In response, some "budget" muscle cars began to appear, such as the 1967 Plymouth GTX,[65] the 1968 Plymouth Road Runner,[66] and the 1968 Dodge Super Bee. In 1969, the Plymouth Road Runner was awarded Motor Trend magazine's Car of the Year.[67] With optional performance parts such as intake and exhaust manifolds, upgraded carburetor, and drag-racing tires, the Road Runner had a quarter-mile time of 14.7 seconds at 100.6mph. In this customized form, the cost of the Road Runner was US$3,893.[66]
The Plymouth Barracuda was a pony car that could be turned into a muscle car with the addition of the famed Chrysler 426 Hemi, available as an option beginning in 1968, after debuting in street form two years earlier in the Plymouth Belvedere, Dodge Coronet, and Dodge Charger. Originally based on the smaller compact car body and chassis of the Plymouth Valiant, the Barracuda was also available with a 3831NaN1 V8 engine producing 3000NaN0. It could run a quarter-mile in 13.33 seconds at 106.5mphon the drag strip. The base price was $2,796.00; the price as tested by Hot Rod was $3,652.[68] The related 1970 Plymouth Duster was powered by a 3401NaN1 V8 engine producing 2900NaN0. Performance figures were 0 to 60mph in 6.0 seconds and the quarter-mile time of in 14.7 seconds at 94.3mph.[69]
The 4271NaN1 Chevrolet L72 big-block engine became available in the mid-sized Chevrolet Chevelle in 1969 as the COPO 427 option. The 427 Chevelle could run a 13.3 sec. quarter-mile at108mph. Chevrolet rated the engine at 4250NaN0, but the NHRA claimed power output to be 450hp.[70] The following year, the "Chevelle SS 454" model was introduced, which used the 4541NaN1 Chevrolet LS6 big-block engine rated at 4500NaN0, the highest factory rating at that time.[71]
The fastest muscle car produced by American Motors was the mid-sized 1970 AMC Rebel "The Machine", which was powered by a 3901NaN1 engine producing 3400NaN0.[72] The Rebel had a 0–60mph time of 6.8 seconds and a quarter-mile run in 14.4 seconds at 99mph.[73]
The popularity of muscle cars declined through the early 1970s, due to factors including the Clean Air Act, the fuel crisis, and the increasing cost of insurance for these types of cars.[74] The 1973 oil crisis resulted in rationing of fuel and higher prices. Muscle cars quickly became unaffordable and impractical for many people.[75] In addition, the automobile insurance industry levied surcharges on all high-powered models.
Before the Clean Air Act of 1970, a majority of muscle cars came optioned with high-compression engines (some engines were as high as 11:1), which required high-octane fuel. Prior to 1970, 100-octane fuel was common. However, following the passage of the Clean Air Act of 1970, octane ratings were lowered to 91 (due in part to the removal of lead). Manufacturers reduced the compression ratio of engines, resulting in reduced performance. Simultaneously, efforts to combat air pollution focused Detroit's attention on emissions control rather than increased power outputs.
Muscle car performance began a resurgence in the early 1980s with high-output V8 engines introduced for the Ford Mustang GT, Chevrolet Camaro Z28, and Pontiac Firebird Formula/Trans Am. Initially using four-barrel carburetors, engine performance, and fuel economy were increased by the mid-1980s using electronic fuel injection systems and advanced engine management controls. Muscle car performance began to reappear on intermediate two-door coupés such as the Chevrolet Monte Carlo SS and Buick Regal. The Buick Regal used turbocharged V6 engines on the Grand National, Turbo-T, T-Type, and GNX models which rivaled the performance of V8 engines.[76]
The few muscle cars remaining in production by the mid-1990s included the fourth generation Mustang,[77] [78] fourth generation Camaro,[79] [80] and fourth generation Firebird.[81] [82]
For the 2004 model year, the Pontiac GTO was relaunched in the United States as a rebadged captive import version of the Holden Monaro. The model was to recreate the past versions, but the new version "was nothing like the old aggressive and evocative model from the 60s" and it was discontinued in 2006.[83] [84]
For 2005, Chrysler introduced muscle car heritage to high-performance V8-powered versions of four-door sedans, the Dodge Charger and Chrysler 300C, using nameplates traditionally used for two-door muscle cars.
For 2005, the fifth-generation Ford Mustang, designed to resemble the original first-generation Mustang, brought back the aggressive lines and colors of the original.
For the 2006 model year, GM relaunched the Chevrolet Monte Carlo SS with the first V8 engine on the Monte Carlo in 15 Years. The same V8 was used on the Monte Carlo's W-Body sister cars like the Pontiac Grand Prix GXP, Buick Lacrosse Super, and the Chevrolet Impala SS. All Monte Carlo production ended on June 19, 2007, because of declining sales of coupe models in general as well as Chevrolet's plan to reintroduce a new Camaro.[85]
For 2008, Chrysler re-introduced the Dodge Challenger, which features styling links to the 1970 first-generation Challenger and was claimed by the Chrysler CEO to be "a modern take on one of the most iconic muscle cars".[86]
A year later, running on that same sentiment, Chevrolet released the 2009 fifth-generation Camaro, which bears some resemblance to the 1969 first-generation Camaro.
The first Australian-designed car to be marketed as a performance model was the 1963 Holden EH S4 model, of which 120 road cars were produced so that the model could be eligible to compete at the 1963 Armstrong 500 motor race at Bathurst.[87] [88] The EH S4 was powered by an upgraded version of the standard six-cylinder engine, enlarged to 179cuin and producing 900NaN0.[89] [90] In 1964, the Ford Falcon (XM) became available with an enlarged 200cuin "Super Pursuit" version of the standard six-cylinder engine, which produced 900NaN0.[91]
In 1965, the Chrysler Valiant AP6 became the first Australian car to be available with a V8 engine. This optional engine was the 273cuin version of the Chrysler LA engine, which produced 1350NaN0 and was imported from the United States.[92] The first Australian-designed Ford to be available with a V8 was the 1966 Ford Falcon (XR), with a 289cuin version of the Ford Windsor engine (imported from the United States), which produced 200bhp.[93] The first Holden to be available with a V8 was the 1968 Holden HK, with a 307cuin version of the Chevrolet small-block V8 (imported from the United States) which produced 210bhp.[94] Later that year, a 327cuin version of the engine became available in the Holden HK Monaro GTS 327 coupe.[95]
The pinnacle of 1970s Australian muscle cars were the 1971–1972 Ford Falcon GTHO, Holden Monaro 350, and Chrysler Valiant Charger R/T (the smaller Holden Torana GTR was also a successful performance car of the era, but it is not considered a muscle car due to its prioritization of lighter weight over outright power output). The Ford Falcon (XY) GTHO Phase III model was powered by a 351cuin version of the Ford Cleveland V8 engine, officially rated at 300bhp, but estimated to produce between 350-.[96] The Holden HQ Monaro GTS 350 was powered by a 350cuin version of the Chevrolet small-block V8 producing 275bhp.[97] The Chrysler Valiant Charger R/T E49 model was powered by a 265cuin version of the Chrysler Hemi-6 six-cylinder engine producing 302bhp.[98]
In 1972, the production of Australian muscle cars saw a setback when the Supercar scare caused Ford, Holden, and Chrysler to cease development of upcoming performance models, due to government pressure.[99] [100] [101] The Australian muscle car models produced during the 1970s later consisted of the limited production 1977–1978 Holden Torana (LX) A9X option and the 1978–1979 Ford Falcon (XC) Cobra model, both created as homologation models for Group C touring car racing. These were less powerful than their predecessors.[102] [103]
Brands still offered high-performance models with V8 variants throughout the 1980s, but these vehicles were low production and were generally underpowered compared to their late 1960s and 1970s predecessors. An example was the Ford Falcon (XD), which was available with a 5.8 L V8 engine. Subsequent generations of the Ford Falcon would not have any V8 options available until 1992, when the EB XR8 was introduced. The Holden Commodore debuted in 1978. However, a renaissance in muscle cars would be sparked by factory-backed aftermarket operations. Holden Dealer Team would release high-performance models of the Holden Commodore throughout the 1980s, such as the HDT Group A, which would become iconic for its blue paintwork.[104] In 1988, Ford released the Ford Falcon (EB), which was available with a V8 in a 25th anniversary special model celebrating the original Ford Falcon GT.
In Argentina, Chevrolet and Dodge produced two acclaimed models of muscle cars. The first was the producer of the third American generation of the Chevrolet Nova, which in this country was renamed Chevy. This model was initially presented in a 4-door sedan version that maintained many physical features of the Nova coupe version, which would also be produced and marketed in Argentina a few years later. While Dodge produced in Argentina a series of vehicles based on the fourth generation of the Dodge Dart that received the name of Línea Dodge (Dodge Line). This vehicle presented sedan and coupe versions, which in turn were a local redesign of the Dart model and which, depending on its level of equipment, received different names (Polara, Coronado, RT, and GTX). In return for these brands, both Ford and the national producer IKA would respond with the production of two high-performance sedans, such as the Argentine version of the Ford Falcon and a derivative of the Rambler American model, called IKA Torino, which, in addition to its sedan version, would present a coupe version which would end up being acclaimed and popularized in the Argentine automotive field.[105]
According to Car and Driver, January 1990:[106]
According to CNBC, April 2013:[107]
According to Road & Track, January 2021:[108]
According to Motor Trend, June 2023:[109]