Mixed Hodge module explained

(M,F\bullet)

together with a perverse sheaf

l{F}

such that the functor from the Riemann–Hilbert correspondence sends

(M,F\bullet)

to

l{F}

. This makes it possible to construct a Hodge structure on intersection cohomology, one of the key problems when the subject was discovered. This was solved by Morihiko Saito who found a way to use the filtration on a coherent D-module as an analogue of the Hodge filtration for a Hodge structure.[1] This made it possible to give a Hodge structure on an intersection cohomology sheaf, the simple objects in the Abelian category of perverse sheaves.

Abstract structure

Before going into the nitty gritty details of defining Mixed hodge modules, which is quite elaborate, it is useful to get a sense of what the category of Mixed Hodge modules actually provides. Given a complex algebraic variety

X

there is an abelian category

bf{MHM}(X)

[2] pg 339 with the following functorial properties
bbf{MHM}(X)\to
rat
X:D
b
D
cs

(X;Q)

called the rationalization functor. This gives the underlying rational perverse sheaf of a mixed Hodge module.
  1. There is a faithful functor
bbf{MHM}(X)\to
Dmod
X:D
b
D
coh

(l{D}X)

sending a mixed Hodge module to its underlying D-module
  1. These functors behave well with respect to the Riemann-Hilbert correspondence
b
DR
Coh

(l{D}X)\to

b
D
cs

(X;C)

, meaning for every mixed Hodge module

M

there is an isomorphism

\alpha:ratX(M)C\xrightarrow{\sim}DRX(DmodX(M))

.

In addition, there are the following categorical properties

  1. The category of mixed Hodge modules over a point is isomorphic to the category of Mixed hodge structures,

bf{MHM}(\{pt\})\congMHS

  1. Every object

M

in

bf{MHM}(X)

admits a weight filtration

W

such that every morphism in

bf{MHM}(X)

preserves the weight filtration strictly, the associated graded objects
W(M)
Gr
k
are semi-simple, and in the category of mixed Hodge modules over a point, this corresponds to the weight filtration of a Mixed hodge structure.

DX

lifting the Verdier dualizing functor in
b
D
cs

(X;Q)

which is an involution on

bf{MHM}(X)

.

For a morphism

f:X\toY

of algebraic varieties, the associated six functors on

Dbbf{MHM}(X)

and

Dbbf{MHM}(Y)

have the following properties
*
f
!,f
don't increase the weights of a complex

M\bullet

of mixed Hodge modules.
!,f
f
*
don't decrease the weights of a complex

M\bullet

of mixed Hodge modules.

Relation between derived categories

The derived category of mixed Hodge modules

Dbbf{MHM}(X)

is intimately related to the derived category of constructuctible sheaves
b
D
cs

(X;Q)\congDb(Perv(X;Q))

equivalent to the derived category of perverse sheaves. This is because of how the rationalization functor is compatible with the cohomology functor

Hk

of a complex

M\bullet

of mixed Hodge modules. When taking the rationalization, there is an isomorphism
k(M
rat
X(H

\bullet))=pH

\bullet))
X(M
for the middle perversity

p

. Notepg 310 this is the function

p:2N\toZ

sending

p(2k)=-k

, which differs from the case of pseudomanifolds where the perversity is a function

p:[2,n]\toZ\geq

where

p(2k)=p(2k-1)=k-1

. Recall this is defined as taking the composition of perverse truncations with the shift functor, sopg 341

pH

\bullet))
X(M

= p\tau\leqp\tau\geq

\bullet)[+k])
(rat
X(M
This kind of setup is also reflected in the derived push and pull functors
*,f
f
!,f
!,f
*
and with nearby and vanishing cycles

\psif,\phif

, the rationalization functor takes these to their analogous perverse functors on the derived category of perverse sheaves.

Tate modules and cohomology

Here we denote the canonical projection to a point by

p:X\to\{pt\}

. One of the first mixed Hodge modules available is the weight 0 Tate object, denoted

\underline{Q

}_X^ which is defined as the pullback of its corresponding object in

QHdg\inbf{MHM}(\{pt\})

, so

\underline{Q

}_X^ = p^*\mathbb^
It has weight zero, so

QHdg

corresponds to the weight 0 Tate object

Q(0)

in the category of mixed Hodge structures. This object is useful because it can be used to compute the various cohomologies of

X

through the six functor formalism and give them a mixed Hodge structure. These can be summarized with the table

\begin{matrix} Hk(X;Q)&=Hk(\{pt\},

*Q
p
*p

Hdg)

k
\\ H
c(X;Q)

&=Hk(\{pt\},

*Q
p
!p

Hdg)\\ H-k(X;Q)&=Hk(\{pt\},

!Q
p
!p

Hdg)

BM
\\ H
-k

(X;Q)&=Hk(\{pt\},

*Q
p
!p

Hdg) \end{matrix}

Moreover, given a closed embedding

i:Z\toX

there is the local cohomology group
k
H
Z(X;Q)

=Hk(\{pt\},p*i

!\underline{Q
*i
}_X^)

Variations of Mixed Hodge structures

For a morphism of varieties

f:X\toY

the pushforward maps

f*\underline{Q

}^_X and

f!\underline{Q

}^_X give degenerating variations of mixed Hodge structures on

Y

. In order to better understand these variations, the decomposition theorem and intersection cohomology are required.

Intersection cohomology

One of the defining features of the category of mixed Hodge modules is the fact intersection cohomology can be phrased in its language. This makes it possible to use the decomposition theorem for maps

f:X\toY

of varieties. To define the intersection complex, let

j:U\hookrightarrowX

be the open smooth part of a variety

X

. Then the intersection complex of

X

can be defined as
\bulletQ
IC
X

Hdg:=j!*\underline{Q

}_U^[d_X]
where

j!*(\underline{Q

}_U^) = \operatorname[j_!(\underline{\mathbb{Q}}_U^{Hdg}) \to j_*(\underline{\mathbb{Q}}_U^{Hdg})]
as with perverse sheavespg 311. In particular, this setup can be used to show the intersection cohomology groups

IHk(X)=

\bullet\underline{Q
H
*IC
}_X)
have a pure weight

k

Hodge structure.

See also

References

  1. Web site: Hodge structure via filtered $\mathcal$-modules. 2020-08-16. www.numdam.org.
  2. Book: Peters, C. (Chris). Mixed Hodge Structures. 2008. Springer Berlin Heidelberg. 978-3-540-77017-6. 1120392435.