This article provides a list of commercially available software-defined radio receivers.
Name | Type | Frequency range | Max bandwidth | RX ADC bits | TX DAC bits | TX capable | Sampling rate | Frequency accuracyppm | Panadapters / Receivers | Host Interface | Windows | Linux | Mac | FPGA | data-sort-type="currency" | Base price |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Aaronia SPECTRAN V6 ECO[1] | Pre-built | 9 kHz – 8 GHz | Up to 120 MHz (2 Rx with 60 MHz each) | 16 | 14 | 2 GSPS | 0.005 (OCXO option) | 2/1 | Embedded or True IQ data via 1 x USB 3.1 GEN 1. Internet remote via HTTP / JSON | 1 x XC7A200T-2 (930 GMACs) | ||||||
Aaronia SPECTRAN V6 PLUS[2] | Pre-built | 10 MHz – 8 GHz (planned modules for 9 kHz – 26 GHz; 9 kHz – 55 GHz, and 9 kHz – 70 GHz) | Up to 490 MHz (2 Rx with 245 MHz each) | 16 | 14 | 2 GSPS | 0.005 (OCXO option) | 2/1/3 | Embedded or True IQ data via 1 x or 2 x USB 3.0. Optional 1 x USB 3.1 GEN2 (power only). Internet remote via HTTP / JSON | 1 x XC7A200T-2 (930 GMACs) | ||||||
Aaronia SPECTRAN V6 Command Center[3] | Pre-built | 10 MHz – 8 GHz (planned extensions for 9 kHz – 26 GHz; 9 kHz – 55 GHz, and 9 kHz – 70 GHz) | Up to 980 MHz (4 Rx with 245 MHz each) | 16 | 14 | 8 GSPS | 0.005 (OCXO option) | 8/4/12 | Full IQ and/or Spectra data rate streaming. Fixed Workstation/PC integration. | 4 x XC7A200T-2 (930 GMACs each) | ||||||
Aaronia SPECTRAN V6 ENTERPRISE[4] | Pre-built | 10 MHz – 8 GHz (planned extensions for 9 kHz – 26 GHz; 9 kHz – 55 GHz, and 9 kHz – 70 GHz) | Up to 3000 MHz (12 Rx with 245 MHz each) | 16 | 14 | 24 GSPS | 0.005 (OCXO option) | 24/12/36 | Full IQ and/or Spectra data rate streaming. Remote via 2 x 100 GbE. | 12 x XC7A200T-2 (930 GMACs each) | ||||||
ADAT ADT-200A[5] | Pre-built | 10 kHz – 30 MHz (planned modules for 50 – 54 MHz, 70.0 – 70.5 MHz, and 144 – 148 MHz) | 0.5 – 100 kHz | ? | ? | 1/3 | Embedded system (no computer needed), USB, Internet remote | , with option R-1 & ADAT Commander | ? | ? | ||||||
AD-FMCOMMS2-EBZ[6] | Pre-built | 2.4 – 2.5 GHz | 12 | 12 | 61.44 MSPS | 2/2 | FMC (to Xilinx board) then USB 2.0 or Gigabit Ethernet. | |||||||||
AD-FMCOMMS3-EBZ[7] | Pre-built | 70 MHz – 6 GHz | 54 MHz due to filter | 12 | 12 | 61.44 MSPS | 2/2 | FMC (to Xilinx board) then USB 2.0 or Gigabit Ethernet. | ||||||||
AD-FMCOMMS4-EBZ[8] | Pre-built | 70 MHz – 6 GHz | 54 MHz due to filter | 12 | 12 | 61.44 MSPS | 1/1 | FMC (to Xilinx board) then USB 2.0 or Gigabit Ethernet. | ||||||||
AD-FMCOMMS5-EBZ[9] | Pre-built | 70 MHz – 6 GHz | 54 MHz due to filter | 12 | 12 | 61.44 MSPS | 4/4 | FMC (to Xilinx board) then USB 2.0 or Gigabit Ethernet. | ||||||||
ADALM-PLUTO[10] | Pre-built | 325 MHz – 3.8 GHz (70 MHz – 6 GHz with software modification[11]) | 20 MHz (streaming may be less due to USB 2.0) | 12 | 12 | 61.44 MSPS | 1/1 | USB 2.0, Ethernet & WLAN with USB-OTG adapter | Xilinx Zynq Z-7010 | |||||||
AFEDRI SDR[12] | Pre-built | 30 kHz – 35 MHz, 35 MHz – 1700 MHz | 2.3 MHz | 12 | 80 MSPS | 0/2 | USB 2.0, 10/100 Ethernet | |||||||||
AirSpy R2[13] | Pre-built | 24 – 1700 MHz | 10 MHz | 12 | N/A | 10 MSPS MSps ADC sampling, up to 80 MSPS for custom applications | 0.5 | 0/1 | USB | using ports | none | |||||
AirspyHF+[14] | Pre-built | 9 kHz - 31 MHz60 MHz - 260 MHz | 660 kHz | 18 | N/A | 36 MSPS | 0.5 | 0/1 | USB | |||||||
Apache Labs ANAN-10E[15] | Pre-built | 10 kHz – 55 MHz | 14 | ? | 10 W | 122.88 Msps | 0/2 | Gigabit Ethernet | ||||||||
Apache Labs ANAN-10/100 | Pre-built | 10 kHz – 55 MHz | 16 | ? | 10/100 W | 122.88 Msps | 0/4 | Gigabit Ethernet | - | |||||||
Apache Labs ANAN-100D/200D | Pre-built | 10 kHz – 55 MHz | 16 | ? | 100 W | 122.88 Msps | 0/7 | Gigabit Ethernet | - | |||||||
Apache Labs ANAN-7000DLE[16] | Pre-built | 9 kHz – 60 MHz | 16 | 16 | 100 W | ? | 0/7 | Gigabit Ethernet | ||||||||
Apache Labs ANAN-8000DLE[17] | Pre-built | 0 - 61.44 MHz | 16 | 16 | 200 W | ? | 0/7 | Gigabit Ethernet | Altera Cyclone IV | |||||||
AOR AR-2300[18] | Pre-built | 40 kHz – 3.15 GHz | ? | N/A | 65 MSPS | 1/1 | Embedded system (no computer needed), USB | ? | ? | |||||||
ARSP / Wideband MIMO[19] | early kit / pre-built | 400 MHz – 4.4 GHz | ? | ? | 8 MHz streaming / 50 MHz | ? | USB 2.0 | |||||||||
ASR-2300[20] | Pre-Built / Open Source Design | 300 MHz – 3.8 GHz, two general wideband RX and selectable GPS, ISM, PCS, UHF RX bands | ? | ? | <40 MHz (Programmable) | 0/2 | USB 3.0 SuperSpeed | |||||||||
Bitshark Express RX[21] | Kit | 300 MHz – 4 GHz | ? | 105 MSPS (RX only) | 0/1 ? | PCIe | ? | |||||||||
bladeRF[22] | Pre-built | 300 MHz – 3.8 GHz | 28 MHz | 12 | 12 | 80 kSPS – 40 MSPS | 1 | ? | USB 3.0 SuperSpeed | Altera Cyclone 4 E | ||||||
bladeRF 2.0 micro[23] | Pre-built | 47 MHz – 6 GHz | 56 MHz | 12 | 12 | 61.44 MSPS | 2/2 | USB 3.0 SuperSpeed | Altera Cyclone V | |||||||
ColibriDDC[24] | Pre-built | 10 kHz – 62.5 MHz,up to 800 MHz (oversampling) | 38 – 312 kHz | 14 | N/A | 125 MSPS | 3/4 | 10/100 Ethernet | ? | |||||||
COM-3011[25] | Pre-built | 20 MHz – 3 GHz | ext | External ADC required (I/Q output) | ? | USB | ? | ? | ||||||||
Crimson TNG[26] | Pre-built | DC – 6 GHz | > 1200 MHz(4 independent RX chains and 4 independent TX chains, each capable of up to 322 MHz of RF bandwidth) | 16 | 16 |
| 4/4 | 2x 10Gbit/s SFP+, Ethernet | ||||||||
Cross Country Wireless SDR receiver v. 3[27] | Pre-built | 472 – 479 kHz,7.0–7.3 MHz/10.10–10.15 MHz, and 14.00–14.35 MHz | ext | External ADC required (I/Q output) | 1/1 | Crystal controlled two channels | ||||||||||
Cyan | Pre-built | 100 kHz – 18 GHz | 1 – 3 GHz (8 fully independent Rx chains and 8 fully independent Tx chains, each capable of up to 1 GHz of RF bandwidth) | 16 | 16 |
| 1 – 16 receive and 1 – 16 transmit (total of 16 radio chains) | 4x 40Gbit/s QSFP, Ethernet | Intel Stratix 10 SoC | |||||||
DRB 30[28] | Pre-built | 30 kHz – 30 MHz | ext | External ADC required (I/Q output) | ? | LPT parallel port | Up to XP | ? | ? | |||||||
DX Patrol[29] | Pre-built | 100 kHz – 2 GHz (RTL2832U, R820T, 40 MHz upconverter) | 8 | 2.4 (up to 3.2) Msps | ? | USB | ? | ? | ||||||||
easySDR USB Dongle[30] | Pre-built | 64 – 1700 MHz | ? | N/A | 48, 96 kHz | 0/1 | USB | |||||||||
Elektor SDR[31] | Bare PCB and pre-built | 150 kHz – 30 MHz | ? | Soundcard ADC: 48, 96, and 192 kHz | 0/1 | USB | - for PCB | |||||||||
Elektor AVR SDR[32] | Kit and pre-built | up to 1 MHz in undersampling | ? | up to 15 kS/s | 0/1 | UART via RS2-232 converter or USB bridge | - | |||||||||
ELAD FDM-S1[33] | Pre-built | 20 kHz – 30 MHz,up to 200 MHz in undersampling | 192 – 3072 kHz | 14 | N/A | 61.44 MHz | 1/4 | USB | Xilinx | |||||||
ELAD FDM-S2[34] | Pre-built | HF:9 kHz – 52 MHz / FM:74 MHz - 108 MHz / VHF:135 MHz - 160 MHz | 192 kHz – 6 MHz | 16 | N/A | 122.88 MHz | 1/8 | USB 2.0 | Xilinx Spartan-6 | |||||||
ELAD FDM-S3[35] | Pre-built | 9 kHz – 500 MHz | 192 kHz – 24.576 MHz | 16 | N/A | 122.88 MHz/98.304 MHz | USB 3.0 | ? | ||||||||
ELAD FDM-DUO[36] | Pre-built | 10 kHz – 54 MHz (experimental up to 165 MHz) | 192 kHz – 6 MHz | 16 | ? | 122.88 MHz | 1/8+1 | Embedded system + 3x USB 2.0 | Xilinx Spartan-6 | |||||||
Elecraft KX3[37] | Pre-built or kit | 0.5 – 54 MHz(144–148 MHz optional) | 14 | ? | 30 kHz? | 0/1 | USB or embedded system (no computer needed) | |||||||||
FiFi-SDR[38] | Pre-built | 200 kHz – 30 MHz | ? | 96 kHz (integrated soundcard) | 0/1 | USB | ? | [39] | ||||||||
FLEX-6700[40] | Pre-built | 0.01 – 73, 135 – 165 MHz | 24–192 kHz RX (x8), 14 MHz Display (x8) | 16 | 16 | 100 W | 245.76 MSPS | 8/8 | Gigabit Ethernet | Xilinx XC6VLX130T | ||||||
CDRX-3200[41] | Pre-built | 0.01 – 100 MHz | 48 – 250 kHz RX (x32) | 24 | 48-250 kSPS | 0/32, coherent or independent | Gigabit Ethernet | through API | through API | through API | Xilinx XC5VLX30T | |||||
LBRX-24[42] | Pre-built | 950 – 2150 MHz | 150 kHz – 80 MHz (x24) | 16 | 150 kSPS – 80 MSPS | 0/24 | 10 Gigabit Ethernet (x4) | through API | through API | through API | Xilinx XC6VHX380T (x2) | |||||
ML-9600 with MIL-STD-188-110D data to 24kHz[43] | Pre-built | 0.01 – 54 MHz | 24 – 3072 kHz RX (x4), 14 MHz Display (x4) | 16 | 16 | 245.76 MSPS | 5x10^-13 (with GPSDO) | 4/4 | Gigabit Ethernet | Xilinx XC7A200T-2 | Contact MFG | |||||
ML-9600W with MIL-STD-188-110D data to 48kHz[44] | Pre-built | 0.01 – 54 MHz | 24 – 3072 kHz RX (x4), 14 MHz Display (x4) | 16 | 16 | 245.76 MSPS | 5x10^-13 (with GPSDO) | 4/4 | Gigabit Ethernet | Xilinx XC7A200T-2 | Contact MFG | |||||
FLEX-6700R | Pre-built | 0.01 – 73, 135 – 165 MHz | 24 – 192 kHz RX (x8), 14 MHz Display (x8) | 16 | 245.76 MSPS (receiver) | 5x10^-13 (with GPSDO) | 8/8 | Gigabit Ethernet | Xilinx XC6VLX130T | |||||||
FLEX-6600M[45] | Pre-built | 0.01 – 54 MHz | 24 – 192 kHz RX (x4), 14 MHz Display (x4) | 16 | 16 | 100 W | 245.76 MSPS | 5x10^-13 (with GPSDO) | 4/4 | Gigabit Ethernet | Xilinx XC6VLX130T or XC7A200T | |||||
FLEX-6600 | Pre-built | 0.01 – 54 MHz | 24 – 192 kHz RX (x4), 14 MHz Display (x4) | 16 | 16 | 100 W | 245.76 MSPS | 5x10^-13 (with GPSDO) | 4/4 | Gigabit Ethernet | Xilinx XC6VLX130T or XC7A200T | |||||
FLEX-6500[46] | Pre-built | 0.01 – 73 MHz | 24 – 192 kHz RX (x4), 14 MHz Display (x4) | 16 | 16 | 100 W | 245.76 MSPS | 5x10^-13 (with GPSDO) | 4/4 | Gigabit Ethernet | Xilinx XC6VLX75T | |||||
FLEX-6400M[47] | Pre-built | 0.01 – 54 MHz | 24 – 192 kHz RX (x2), 7 MHz Display (x2) | 16 | 16 | 100 W | 122.88 MSPS | 5x10^-13 (with GPSDO) | 2/2 | Gigabit Ethernet | Xilinx XC6VLX75T or XC7A200T | |||||
FLEX-6400 | Pre-built | 0.01 – 54 MHz | 24 – 192 kHz RX (x2), 7 MHz Display (x2) | 16 | 16 | 100 W | 122.88 MSPS | 5x10^-13 (with GPSDO) | 2/2 | Gigabit Ethernet | Xilinx XC6VLX75T or XC7A200T | |||||
FLEX-6300[48] | Pre-built | 0.01 – 54 MHz | 24 – 192 kHz RX (x2), 14 MHz Display (x2) | 16 | 16 | 100 W | 122.88 MSPS | 2/2 | Gigabit Ethernet | |||||||
FLEX-5000A | Pre-built | 0.01 – 65 MHz | 48 – 192 kHz (x2) | 24 | 24 | 100 W | 48, 96, 192 kHz | 2/2 | 1394a Firewire | |||||||
FLEX-3000 | Pre-built | 0.01 – 65 MHz | 48 – 96 kHz | 24 | 24 | 100 W | 48, 96 kHz | 1/1 | 1394a Firewire | |||||||
FLEX-1500[49] | Pre-built | 0.01 – 54 MHz | 48 kHz | 16 | 16 | 5 W | 48 kHz | 1/1 | USB | |||||||
FreeSRP | Pre-built (OSHW) | 70 – 6000 MHz | 61.44 MHz | 12 | ? | 61.44 Msps | 1/1 | USB 3.0 | ? | ? | ? | - | ||||
FUNcube Dongle[50] | Pre-built | 64 – 1700 MHz | 16 | 96 kHz[51] | 0/1 | USB | ||||||||||
FUNcube Dongle Pro+ | Pre-built | 0.15 – 240 MHz, 420 – 1900 MHz | 16 | 192 kHz | 0/1 | USB | ||||||||||
HackRF One[52] | Pre-built | 1 MHz – 6 GHz | 20 MHz | 8 | 8 | 8 – 20 Msps | 20 | 0/1 | USB 2.0 | |||||||
Hermes-Lite2 (build9)[53] | experimental kit | 0 to 38.4 MHz | 1.536 MHz | 12 bits @ 76.8 MHz | 12 bits @ 153.6 MHz | 76.8 MSPS | 0.5 ppm | 4 / 4 + 1 | Ethernet | Altera Cyclone IV | Depends on component cost, build9 cost: + for N2ADR Companion Filter Card | |||||
HiQSDR[54] | prebuilt modules & kits, pcbs | 30 kHz – 62 MHz | ? | 48 – 960 kHz | ? | 10/100 Ethernet | - | |||||||||
HobbyPCB RS-HFIQ[55] | Pre-built | 3 MHz – 30 MHz | Up to 250 kHz depending on Sound Card | ? | ? | 5 W | Depends on Sound Card | 2/1 Using HDSDR software | Relies on a computing asset with sound device to process I and Q input and output | Yes, HDSDR, PowerSDR | Yes, Quisk, Linrad, GNU Radio | Yes, various software | ||||
Hunter SDR[56] | Kit | 2.5 – 30 MHz (1 – 30 MHz typ.) | ext | External ADC required (I/Q output) | ? | USB | ||||||||||
Icom IC-7610[57] | Pre-built | RX: 0.030 - 60 MHz. TX: differs between regional models. | 16 | 14 | 130 MHz[58] | 2/2 | USB 2.0 Ethernet | |||||||||
Iris-030[59] | Pre-built | 50 MHz – 3.8 GHz | 122.88 MHz | 12 | 12 | 122.88 Msps (SISO) 61.44 Msps (MIMO) | 2/2 | Gigabit Ethernet or 24.6 Gbit/s High-Speed Bus | Xilinx Zynq 7030 | |||||||
ISDB-T 2035/2037[60] | Pre-built | 50 – 960 MHz | 8 MHz | ? | 0.5-12 MS/s | 0/1 | USB | |||||||||
Kanga Finningley[61] | Kit | 3.750 MHz ± 48 kHz | ext | External ADC required (I/Q output) | ? | None | ||||||||||
KerberosSDR (4x coherent RTL-SDR's)[62] | Pre-built | 24 MHz - 1.7 GHz | 4 times the sample rate | 8 | 2.4 Msps (can go up to 3.2 Msps but drops samples) | <1ppm | 4/4 | USB | ||||||||
LimeSDR[63] | Pre-built (full Open Source/Hardware) | 100 kHz – 3.8 GHz | 61.44 MHz (120 MHz internally) | 12 | ? | 61.44 Msps | 2.5 | 2/2 | USB 3.0, PCIe | Altera Cyclone IV | (USB) - (PCIe) | |||||
LimeSDR Mini[64] | Pre-built (full Open Source/Hardware) | 10 MHz – 3.5 GHz | 30.72 MHz | 12 | ? | 30.72 Msps | 2.5 | 1/1 | USB 3.0, PCIe | Altera MAX 10 | ||||||
LimeSDR Mini 2.0[65] | Pre-built (full Open Source/Hardware) | 10 MHz – 3.5 GHz | 30.72 MHz | 12 | ? | 30.72 Msps | 2.5 | 1/1 | USB 3.0, PCIe | Lattice ECP5 | ||||||
LD-1B[66] | Pre-built | 100 kHz – 30 MHz | ext | External ADC required (I/Q output) | ? | USB | ? | ? | ||||||||
Lunaris-SDR[67] | Pre-built | 10 kHz – 55 MHz | ? | 122.88 Msps | 0/4 | Gigabit Ethernet | ||||||||||
Matchstiq[68] | Pre-built | 300 MHz – 3.8 GHz | ? | ? | 40 MSPS (RX/TX) | ? | Embedded System or USB | Xilinx Spartan 6 | ||||||||
MB1[69] | Pre-built | 10 kHz – 160 MHz | 38 – 312 kHz | 16 | 14 | 160 MSPS (RX), 640 MSPS (TX) | 3/4 | 10/100 Ethernet, WLAN (optional) | ? | US$5,595 | ||||||
Mercury[70] | Pre-built | 0.1 – 55 MHz | 16 | 122.88 MSPS | 0/7 | USB (via Ozy) or Ethernet (via Metis) | ||||||||||
Myriad-RF 1[71] | Pre-built | 300 MHz – 3.8 GHz | ? | Programmable (16 selections);0.75 – 14 MHz, Bypass mode | 1/1 | standard connector FX10A-80P | none | |||||||||
NooElec NESDR SMArt[72] | Pre-built | 25 – 1750 MHz | 2.4 MHz nominal, and 3.2 MHz max. | 8 | NA | 480 MSPS without dropping any samples | 0.5 ppm | USB 2.0 | None | |||||||
NetSDR[73] | PnP | 0.1 kHz – 34 MHz | ? | 80.0 MHz | 0/1 ? | Ethernet | ||||||||||
Noctar[74] | Pre-built PCIe card | 100 kHz – 4 GHz | 200 MHz | ? | ? | ? | PCI Express ×4 | |||||||||
Odyssey TRX[75] | Pre-built | 0.5 – 55 MHz | ? | 122.880 MSps ADC sampling, 48k-960k output samplrate | 2/2 | LAN, WiFi, USB | Altera Cyclone IV | |||||||||
Perseus[76] | Pre-built | 10 kHz – 40 MHz (87.5–108 MHz using FM down-converter) | 1.6 MHz | 16 | 80 MS/s (16 bit ADC) | ? | USB 2.0 | [77] | ? | |||||||
Pappradio[78] | Pre-built | 150 kHz – 30 MHz(210 MHz using harmonics) | ext | External ADC required (I/Q output) | ? | USB | ? | |||||||||
PCIe SDR MIMO 2x2[79] | Pre-built | 70 MHz – 6 GHz | ? | 61.44 Msps | 2/2 | PCIe (1x) | ||||||||||
PM-SDR[80] | Pre-built | 100 kHz – 50 MHz (up to 165 MHz using harmonics) | 192 kHz | ext | External ADC required (I/Q output) | ? | USB | ? | ||||||||
PrecisionWave Embedded SDR[81] | Pre-built / Customizable Frontends | 1 MHz – 9.7 GHz (depending on frontend) | 2x RX: 155 MHz2x TX: 650 MHz2x2 MIMOAudio: up to 320 kbit/s | ? | 310 MSPS | 2 | Embedded SystemGigabit Ethernet / USB / JTAG / Audio | Xilinx Zynq Z-7030 | - | |||||||
QS1R[82] | Pre-built | 10 kHz – 62.5 MHz (up to 500 MHz using images/alias) | 16 | 125 MHz | 1/2-4 | USB | Altera Cyclone III | |||||||||
Quadrus (DRU-244A and SRM-3000)[83] | Pre-built | 0.1 – 440 MHz | ? | 80 MSps ADC sampling, 48k-1.536M output samplrate | 0/16 | PCI | ||||||||||
Radioberry | experimental kit | 0 to 38.4 MHz | 4x RX 48K | 12 bits @ 76.8 MHz | 76.8 MSPS | Ethernet | Altera Cyclone 10LP | |||||||||
Realtek RTL2832U DVB-T tuner[84] | Pre-built with custom driver | 24 – 1766 MHz (R820T tuner)(sensitivity drops off considerably outside this range, but can go 0–2,200 MHz (E4000 tuner with direct sampling mod)) | Matches sampling rate, but with filter roll-off | 8 | 2.8 MHz (can go up to 3.2 MHz but drops samples) | ? | USB | - | ||||||||
Red PitayaSDRlab122-16[85] | Pre-built | 2 RX + 2TX300 kHz - 60 MHz (500 MHz bw with undersampling) | 500 MHz | 16 bit @ 122MSPS | 14 bit @122MSPS | 122.88 MSPS | up to 12 | Gbit Ethernet and optional WiFi | Xilinx Zynq Z-7020 | |||||||
RDP-100[86] | Pre-built | RX, 0 – 125 MHz;TX, 0–200 MHz | ? | RX: 250 MSPSTX - 800 MSPS | ? | Embedded System | ||||||||||
RTL-SDR V3 Receiver Dongle(hardware modded R820T2/RTL2838U DVB-T Tuner Dongles)[87] | Pre-built and pre-modded with custom driver | 0.5 – 1766 MHz(mod: RTL2832U Q-branch pins soldered to antenna port)[88] | Matches sampling rate, but with filter roll-off | 8 | 2.4 MHz (can go up to 3.2 MHz but drops samples) | 1 | ? | USB | - | |||||||
SDRplay: RSP1A[89] | Pre-built | 1 kHz – 2 GHz | 10 MHz | 14<2 MHz12<8 MHz 10<9.216 MHz 8>9.216 MHz | 20 MSPS with 11 built-in preselection filters | 0.5 | 1/1 | USB 2.0 | none | US$109 | ||||||
SDRplay: RSP1B[90] | Pre-built | 1 kHz – 2 GHz | 10 MHz | 14<2 MHz12<8 MHz 10<9.216 MHz 8>9.216 MHz | 20 MSPS with 11 built-in preselection filters | 0.5 | 1/1 | USB 2.0 | none | US$132 | ||||||
SDRplay: RSPdx[91] | Pre-built | 1 kHz – 2 GHz | 10 MHz | 14<2 MHz12<8 MHz 10<9.216 MHz 8>9.216 MHz | 20 MSPS with 12 built-in preselection filters and 3 antenna ports | 0.5 | 1/1 | USB 2.0 | none | US$199 | ||||||
SDRplay: RSPduo[92] | Pre-built | 1 kHz – 2 GHz | 10 MHz | 14<2 MHz12<8 MHz 10<9.216 MHz 8>9.216 MHz | Two independent tuners, each with 11 built-in preselection filters. 3 antenna ports | 0.5 | 2/2 | USB 2.0 | none | US$279 | ||||||
Soft66AD / Soft66ADD / Soft66LC4 / Soft66RTL[93] | Pre-built | 0.5 – 70 MHz | ext | External ADC required (I/Q output) | 0/1 | USB | Unofficially | ? | ||||||||
SDR-IQ[94] | PnP | 0.1 kHz – 30 MHz | ? | 66.666 MHz | 1/1 ? | USB | ||||||||||
SDR-IP[95] | PnP | 0.1 kHz – 34 MHz | ? | 80.0 MHz | 1/1 ? | Ethernet | ||||||||||
SDR-LAB SDR04[96] | Pre-built | 0.4 – 4 GHz | ? | 40 MHz | ? | USB 3.0 SuperSpeed | ||||||||||
SDRX01B[97] | Pre-built and kit option | 50 kHz – 200 MHz | ext | < 2 MHz External ADC required (I/Q output) | 0/1 - Scalable (multiple receiver can be connected to the same LO) | Ethernet or USB usually, but other interfaces are available in MLAB modular system | ||||||||||
SDR Minor[98] | Pre-built | 0.1 – 55 MHz | ? | 122.880 MSps ADC sampling, 48k-960k output samplrate | 1/1 | LAN 10/100 | ||||||||||
SDR-1[99] | Kit and pre-built | 530 kHz – 30 MHz | ? | up to 192 kHz depending on soundcard | 0/1 | USB | ||||||||||
SDRstick UDPSDR-HF2[100] | Pre-built | 0.1 – 55 MHz | ? | 122.88 Msps | 0/1 | 1G Ethernet via BeMicroCV-A9 | Altera (as an add-on) | |||||||||
SDRstick UDPSDR-HF1Please Note: A functional receiver requires both the UDPSDR-HF1 and a BeMicro SDK FPGA development board | Pre-built | 0.1 – 30 MHz | ? | 80 Msps | 0/1 | 1G Ethernet via BeMicroCV-A9 | Altera (as an add-on) | |||||||||
SDR MK1.5 'Andrus'[101] | Pre-built, Open Source Design | 5 kHz – 31 MHz(1.7 GHz downconverter opt.) | ? | 64 MSPS | ? | USB 2.0, 10/100 Ethernet | ||||||||||
SDR-4+[102] | Pre-built | 0.85 – 70.5 MHz | ? | 48 kHz (integrated soundcard) | 1/1 | USB × 2 | ||||||||||
SDR(X) HF, VHF & UHF[103] | Pre-built | 0.1 – 1850 MHz (R820T tuner) | ? | Optimized for HF amateur bands with 4 user selectable pre-select HF filters | ? | USB | ||||||||||
SignalShark[104] | Pre-built | 8 kHz - 8 GHz | 40 MHz | 16 | N/A | ? | < 1 | ? | Gigabit Ethernet | ? | ? | ? | €17,000 | |||
SoftRock-40[105] | Kit | 7.5 MHz | ext | 48 kHz | 0/1 | USB | ||||||||||
SoftRock Lite II[106] | Kit | 1.891 – 1.795 MHz,3.57 – 3.474 MHz,7.104 – 7.008 MHz,10.173 – 10.077 MHz,14.095 – 13.999 MHz(also purchasable in other tunings) | ext | 96 kHz | 0/1 | USB | ||||||||||
SoftRock RX Ensemble II LF[107] | Kit or Pre-built | 180 kHz – 3.0 MHz | ext | External ADC required (I/Q output) | 0/1 | USB | or | |||||||||
SoftRock RX Ensemble II HF[108] | Kit or Pre-built | 1.8 – 30 MHz | ext | External ADC required (I/Q output) | 0/1 | USB | or | |||||||||
SoftRock RX Ensemble RXTX[109] | Kit or Pre-built | Choose either 160m, 80m/40m, 40m/30m/20m, 30m/20m/17m, or 15m/12m/10m ("complete [rx/tx] frequency agility within the [chosen] 'superband'")[110] | ? | External ADC required (I/Q output) | USB | or | ||||||||||
Spectre[111] | Pre-built | 0.4 – 4 GHz | 200 MHz | 16 | 310 MSPS | USB, Serial, jtag, 10 Gbit/s SFP+ Ethernet | ||||||||||
SunSDR2 Pro[112] | Pre-built | 10 kHz – 160 MHz | 38 – 312 kHz | 16 | 14 | 160 MSPS (RX), 640 MSPS (TX) | 3/4 | 10/100 Ethernet, WLAN (embedded) | U$1,595 | |||||||
ThinkRF WSA5000[113] | Pre-built | 50 MHz – 8 GHz, 18 GHz or 27 GHz | Up to 100 MHz | 125 MSPS | ? | 10/100/1000 Ethernet | - | |||||||||
UHFSDR[114] | Kit | 1.75 – 700 MHz Tx/Rx | ext | External soundcard required (I/Q input/output) | ? | LPT parallel port or USB/W QRP2000/UBW/UBW32 | N\A | N\A | N\A | (partial kit) | ||||||
USRP B200[115] | Pre-built | 70 MHz – 6 GHz | 56 MHz | 12 | 12 | 56 Msps | USB 3.0 | Xilinx Spartan 6 XC6SLX75 | ||||||||
USRP B210[116] | Pre-built | 70 MHz – 6 GHz | 56 MHz | 12 | 12 | 56 Msps | USB 3.0 | Xilinx Spartan 6 XC6SLX150 | ||||||||
USRP N200[117] | Pre-built | DC – 6 GHz | Up to 25 MHz (40 MHz b/w cards limited by GigE interface) [118] | 14 | 16 | 25 Msps for 16-bit samples; 50 Msps for 8-bit samples | 0.5 ppm TCXO. 0.01 ppm w/ GPSDO Option | Gigabit Ethernet | Xilinx Spartan 3A-DSP 1800 | |||||||
USRP N210[119] | Pre-built | DC – 6 GHz | Up to 25 MHz (40 MHz b/w cards limited by GigE interface) | 14 | 16 | 25 Msps for 16-bit samples; 50 Msps for 8-bit samples | 0.5 ppm TCXO. 0.01 ppm w/ GPSDO Option | Gigabit Ethernet | Xilinx Spartan 3A-DSP 3400 | |||||||
USRP X300[120] | Pre-built | DC – 6 GHz | Up to 320 MHz (2x TX/RX at 160 MHz each) | 14 | 16 | 200 Msps | 2.5 ppm GPSDO Option 20 ppb (GPS unlocked) | Gigabit Ethernet, 10 Gigabit Ethernet, PCIe | Xilinx Kintex-7 XC7K325T | |||||||
USRP X310[121] | Pre-built | DC – 6 GHz | Up to 320 MHz (2x TX/RX at 160 MHz each) | 14 | 16 | 200 Msps | 2.5 ppm GPSDO Option 20 ppb (GPS unlocked) | Gigabit Ethernet, 10 Gigabit Ethernet, PCIe | Xilinx Kintex-7 XC7K410T | |||||||
UmTRX[122] | Pre-built | 300 MHz – 3.8 GHz | Up to 28 MHz | 12 | 12 | 13 MSPS x2 | 0.1; 0.01 with GPS lock | ? | Gigabit Ethernet | ? | Spartan 6 LX75 | |||||
WARPv3[123] | Pre-built | 2.4 GHz and 5.8 GHz | 40 MHz | 12 | 12 | 40 Msps | 1/2 | Dual Gigabit Ethernet | Xilinx Virtex-6 LX240T | |||||||
WinRadio WR-G31DCC[124] | Pre-built | 9 kHz – 50 MHz | ? | N/A | 100 MSPS | 3/3 | USB | |||||||||
X-RAD[125] | Pre-built | RX: 950–1450 MHzTX: 875–1525 MHz | ? | RX: 1.6 GSPSTX: 3.2 GSPS | ? | PCIe | ||||||||||
Xiegu G90 https://pileupdx.com/product/xiegu-g90-hf-20w-sdr-transceiver/ | Pre-built | RX: 0.5 - 30 MHzTX: all amateur bands 1.8 - 30 MHz | 48 kHz | 24 | 20 W |
| 10 | 1/1 | Embedded system (no computer needed), I/Q output for interfacing with a PC or XDT1 panadapter | €479.00 | ||||||
XTRX Pro[126] | Pre-built | 30 – 3700 MHz | 120 MHz | 12 | 12 | 120 MSRP SISO, 90 MSRP MIMO | 0.1;0.01 with GPS lock | mini PCIe | Xilinx Artix7 50T | |||||||
Zeus ZS-1[127] | Pre-built | 300 kHz – 30 MHz | ? | 10 kHz, 20 kHz, 40 kHz, 100 kHz | 1/3 | USB 2.0 | ||||||||||
USRP N310[128] | Pre-built | 10 MHz – 6 GHz | 100 MHz | 16 | 14 | 122.88, 125, and 153.6 MS/s | 0.1 ppm | SFP+/ Gigabit Ethernet | Xilinx Zynq 7100 | US$15,750 |
https://www.nsiradio.com/Expert-Electronics-c14078087