List of 3D printed weapons and parts explained

The table below lists noteworthy 3D printed weapons (mainly 3D printed firearms) and parts.

The Liberator .380 was the first 3D printed plastic gun made widely available online. It was a single shot pistol made using a Stratasys Dimension SST 3-D printer.^{[1] [2]}

The Solid Concepts replica of the M1911 pistol was the first 3D printed metal gun,^[3] created using more than 38 printed parts;^[4] It has successfully fired more than 5000 rounds without damaging the gun.^[5]

List of weapons and parts

Key/Legend

Entire firearms

Name	Date made public	Type	Mechanism	Process	Designer	Other required parts	Caliber
Monolith Arms P-12^[6] ^[7] ^[8]	2005	Hybrid firearm:shotgun	Pump action		Empty Shell llc		12-gauge
	Never publicly released Horizontal 20 round detachable magazine
Liberator .380	2013-05May 2013^[9] ^[10]	Primarily printed firearm: Pistol	Single shot	FDM^[11]	Defense Distributed^[12]	Roofing nail	.380 ACP
	A single shot .380 ACP pistol. Fully 3D printed including springs, requiring only a roofing nail Notable as the first publicly released printed firearm design
Grizzly,^[13] Grizzly 2.0^[14]	2013-08August 2013	Hybrid firearm: Rifle	Single-shot	FDM w/ ABS	"Matthew" (pseudonym)	.22 caliber barrel linerMetal rodsMetric fasteners	.22 LR
Reprringer^[15] ^[16] ^[17]	2013-09September 2013	Primarily printed firearm: Pepper-box revolver		FDM	Hexen		.22 Short/.22 LR
	It can hold 5 .22 caliber cartridges. Unlike the many early 3D-printed firearm designs, which were overbuilt in order to withstand the pressures and strain on the material from modern gunpowder cartridges, the Reprringer is small and only slightly larger than an equivalent gun made from steel.
Solid Concepts 1911 DMLS	2013-11November 2013	Weapon: Browning 1911 handgun	Semi-automatic, Short-recoil	DMLS	Solid Concepts		.45 ACP
	The gun is made up of 34 3D-printed components. Notable as the first fully metal 3D-printed firearm.
Zig Zag revolver^[18]	2014-05May 2014	Primarily printed firearm: Revolver		FDM	Yoshitomo Imura		.38 Caliber
	Named after the German Mauser Zig-Zag revolver. Holds six cartridges and can fire .38 caliber bullets.
Imura Revolver^[19] ^[20] ^[21]	2014-09September 2014	Primarily printed firearm: Revolver		FDM	FOSSCAD members: WarFairy, Frostbyte and others	.22 caliber barrel liner	.38 Caliber
	A double-action revolver that holds six cartridges.^[22] While primarily made of plastic, it includes a steel barrel liner and chamber sleeves to increase tensile strength.^[23]
Reason^[24]	2013-11October 2014	Weapon: M1911 pistol	Semi-autonatic Recoil operation	DMLS^[25]	Solid Concepts^[26]		10mm Auto
	Created roughly after a year the first known metal 3D printed gun was produced. Has the word "Reason" etched on it, along with an excerpt from the Declaration of Independence on the barrel.
XPR-1^[27]	2015-10October 2015	Weapon: Plasma Armature Railgun		FDM	David Wirth^[28]
	First 3D printed railgun structure. Closed source - designs and code released to research institutions only. Employed a mixture of traditional and additive manufacturing. Rails were traditionally machined, as well as the fasteners and electronics.
PG22^[29]	2017-02February 2017	Primarily printed firearm:pistol	Single-shot	FDM w/ PLA	Pilotgeek	Steek barrel liner, breechblock, firing pin, and spring	.22 LR
	Uses a plastic frame, slide, and fire control components with a steel barrel liner, breechblock, firing pin, and spring. First in line of "PG22" single shot pistols and revolvers. Individually designed, rather than built off of open-source plans.
EMG-01A^[30]	2018-07July 2018	Weapon: Coilgun		FDM	Arcflash Labs
	First commercial handheld coilgun.^[31]
PG22 Maverick Revolver ^[32] ^[33]	October 2019 (v1); April 2021 (v2.4)	Hybrid firearm: Pepper-box revolver		FDM w/ PLA (original) or PLA+ (Maverick V2)	Pilotgeek	Steel barrel liners, ball bearings, firing pin, screws, springs	.22 Short
	Striker-fired, single action revolver with a manually rotated cylinder. Updated version (dubbed the Maverick V2) automatically advances the cylinder on cocking. Mostly-printed hybrid design using steel barrel liners in each chamber, a steel ball bearing to index the cylinder, a steel firing pin, and various metal screws and springs.
FGC-9 /FGC-9 MkII	March 27, 2020 (MKI); April 16, 2021 (MKII)	Hybrid Firearm: pistol	Semi-automatic simple blowback	FDM	JStark1809 (DetDisp)	Steel round stock, springs, AR-15 fire control group springs, fasteners, stainless steel tubing	9×19mm Parabellum
	Based on Shuty AP-9. No parts kit required: barrel can be rifled via Electrochemical machining (ECM). Version two, labeled MKII, features an updated design with an H&K MP5 style charging handle. The MKII was released to work with a string of smaller releases, including an improved barrel making process and V2 Menendez Mag. Includes the "ButWhatAboutAmmo" tutorial for fabricating ammunition.
Thump 'n Grind^[34]	July 2021	Signaling device: Launcher		FDM	AWCY?	Steel rods, tubing, AR-15 FCG, fasteners	37mm ammunition
PM4 CenterFire	October 2021	Primarily printed firearm: pistol	Single shot	FDM	KadeCAD		Center-fire pistol ammunition
	An updated version of the PM422 Songbird capable of firing most center-fire handgun cartridges.
The ARK	December 2021 (v1); March 2022 (DLC); January 2023 (v2)	Hybrid firearm: AR-15 based firearms platform	Semi-sutomatic	FDM	Invader Zip / AWCY?	AR-15 barrel, bolt carrier group, springs, and gas tube, and fasteners	9×19mm Parabellum, .22 LR, .40 S&W, 7.62x25 Tokarev, 10mm Auto, .223/ 5.56x45mm
	An mostly printed AR-15 based platform capable of supporting a wide range of calibers and customization. V2.0 is capable of supporting rifle calibers.
King Cobra 9	January 2022	Hybrid Firearm: pistol	semi-automatic	FDM	Derwood & Mussy	Glock 17 barrel, AR-15 fire control group, CNC machined bolt	9×19mm Parabellum
	Requires Glock 17 barrel, AR-15 fire control group and custom bolt
The Harlot^[35]	February 2022	Primarily printed firearm: Pistol	Single-shot	FDM	BAD-CAD / Black Lotus Coalition	.22 caliber barrel liner, spring, and fasterners	.22 LR
	A most printed .22 LR pistol. Uses a DIY metal barrel, firing pin, and spring. Simple and extremely cheap, designed to cost $5-$8. Commonly created to be sold at gun buybacks for profit.^[36] A large number of remixes and variants of this design have been created.
DS9^[37]	07/15/2023	Pistol: AR-Style Pistol	Semi-automatic	FDM	The Gatalog	Parts from AR-9: bolt, charging handle, barrel, buffer, buffer spring, trigger, magazine catch spring, fasteners	9x19mm
AMK MP7^[38]		Hybrid firearm: pistol	Semi-automatic	FDM	Deterrence Dispensed		5.7x28mm, 9x19mm

Receivers & framesReceiver and frame are the parts that are legally considered a firearm [in what country?] and must be registered [says who?].

Name	Date made public	Type	Process	Designer	Caliber
AR Lower V5^[39]	2013-03March 2013	Receiver: AR-15 rifle lower receiver	FDM^[40]	Defense Distributed	.223 Rem/ 5.56x45
	The receiver was able to handle enough stress to fire more than 600 rounds.
Charon^[41] ^[42] ^[43]	2013-05May 2013	Receiver: AR-15 rifle lower receiver	FDM^[44]	WarFairy	.223 Rem/ 5.56x45
	Charon V3 weighs 0.2 pounds and showed no signs of strain after 96 rounds of 5.56 AR-15 ammo were fired.
WarFairy P-15	2013-05May 2013	Receiver: AR-15 rifle lower receiver	FDM	WarFairy	.223 Rem/ 5.56x45
Hanuman AR-15 Bullpup^[45] ^[46]	2014-05May 2014	Receiver: AR-15 rifle bullpup lower receiver	FDM w/ ABS	WarFairy	.223 Rem/ 5.56x45
	According to the creators, "It requires a bufferless upper to function, such as the ARAK-21 or Rock River Arms PDS Carbine, or a regular upper with a CMMG Style .22 LR Conversion installed."
CM901^[47]	2015-03March 2015	Receiver: AR-10 Receiver	FDM	Printed Firearm^[48]	7.62×51mm
	Based on Colt CM901.
Lopoint / Bigpoint^[49]	November 2019 (v1); November 2020 (40/.45); May 2021 (v2)	Frame: Hi-Point pistol frame	FDM	CTRLPew / Atmac / freeman1337	9×19mm Parabellum, .380 ACP, .40 S&W, .45 ACP
	Compatible with Hi-Point C9, CF380, JCP, and JHP parts. Extremely cheap due to the high availability of the required parts kits.
Scz0rpion^[50]	October 2020	Receiver: CZ Scorpion Evo 3 receiver	FDM	Are We Cool Yet?	9×19mm Parabellum
	First 3D printed frame to be successfully tested with 1000+ rounds full auto in one sitting without failure.^[51] ^[52]
3011 / 3011DS^[53]	November 2021; January 2023 (DS)	Receiver: 1911 based PDW	FDM	Deterrence Dispensed	.45 ACP, 9×19mm Parabellum, .22 TCM
	Utilizes a 1911 slide for the upper, and an AR-15 fire control group. An updated version, called the 3011DS, allows the use of double-stack higher capacity Remington and RIA magazines.
Ruger Charger^[54] ^[55] ^[56]	2014-07July 2014	Receiver: Ruger 10/22 semi-automatic pistol	FDM^[57]	"Buck-o-Fama" (pseudonym)	.22 Long Rifle
	A pistol version of the popular Ruger 10/22 rifle.
3DPD10^[58] ^[59]	April 2023	Frame: Pistol frame	FDM	Avidity Arms	9×19mm Parabellum
	A 3D-printable frame for the Avidity Arms PD10. This design is notable as the first firearm released by commercial company designed to be 3D printed.^[60]
The NYLAUG^[61]	September 2023	Receiver: Steyr AUG receiver	FDM	ANDYOUMAYCALLMEV	.223/ 5.56x45mm

Firearms parts and accessories

Name	Date made public	Type	Process	Designer	Caliber
The Cuomo Mag^[62]	2013-01January 2013^[63]	Magazine: AR-15 rifle STANAG magazine	FDM^[64]	Defense Distributed	.223 Rem/ 5.56x45
	The magazine holds 30 rounds.^[65] ^[66] The initial prototype was created using an Objet Connex26 using VeroClear printing material (a transparent material) in order to show the magazine's round count and feeding action.^[67] It was able to handle enough stress to fire 342 rounds and can fire 227+ rounds in quick succession.
Feinstein AK Mag^[68] ^[69]	2013-03March 2013	Magazine: AK-47 rifle magazine	FDM^[70]	Defense Distributed	7.62×39mm
	A 30-round AK-47 magazine.
Red Rocket shotgun slug	2013-05May 2013	Ammunition: 12 gauge shotgun slug	FDM w/ ABS+^[71]	Jeef Hesszel^[72]	12-gauge
	During testing, the bullet penetrated a 2×12 piece of pine wood, creating a hole in a wire reel.
3DX^[73] ^[74] muzzle brake	2013-07July 2013	Muzzle device: AR-15 rifle muzzle brake	DMLS w/ Inconel	Sintercore	.223 Rem/ 5.56x45
	Designed to tame the recoil and muzzle rise of an AR-15 semi automatic rifle chambered in 5.56×45mm NATO (.223). It fired 7900 rounds during testing on semi-auto. During a test on full auto, 10 magazines of 62 grain green tip 5.56 rounds were fired without any issues. US Special Operation Command's (USSOCOM) Science and Technology Directorate invited Neal (the owner of Sintercore) to demonstrate the 3DX muzzle brake for possible use by its elite troops. They tested it on August 5, 2014.
NERO 556 Muzzle brake^[75] ^[76]	2018	Muzzle device: AR-15 rifle muzzle brake	DMLS w/ Inconel^[77]	Walker Defense Research^[78]	.223 Rem/ 5.56x45
	"The idea was to create a muzzle brake with no equal; one that turns the recoil of an AR-15 into a slight push with zero muzzle rise." Produced for 5.56x45mm (.223 Rem) or .224 Valkyrie rifles with 1/2x28 threads.
5.56×45mm/.223 rifle suppressors: 556-45 Samson (Samson suppressor replica) 556-SBR 556-45 Suppressor^[79]	2013-11November 2013^[80]	Muzzle device: Titanium rifle suppressor	SLM w/ Titanium^[81]	Oceania Defence Ltd.^[82] and Rapid Advanced Manufacturing^[83]	.223 Rem/ 5.56x45
	An additively manufactured titanium weapon suppressor. It is 50% lighter than some conventional steel suppressors. Oceania Defense has made three variations of the 5.56mm/.223 suppressor so far: the 556-45 Samson (an AR-15 suppressor designed to operate on semi auto Short-barreled rifle to 12.5" barrels), 556-SBR (designed for hard use on 10.5" barrel for AR-15 firearms in 5.56mm/.223 ammunition) and 556-45 Suppressor (direct thread on suppressor which overlaps the barrel designed to reduce a baffle strike)
7.62×51mm/.308 rifle suppressors: 300 BLK Long 762-AR10 762-G3^[84]	2013-11November 2013	Muzzle device: Titanium rifle suppressor	SLM w/ Titanium	Oceania Defence Ltd. and Rapid Advanced Manufacturing	7.62x39mm
	An additively manufactured titanium weapon suppressor. 50% lighter than some conventional steel suppressors. Oceania Defence made 3 variations of the 7.62mm rifle suppressor. the 300 BLK Long (designed for use with the 300 AAC Blackout cartridge in both subsonic and supersonic. It fits under the rail of a Samson or similar rail system on the AR-15-type rifle, but can to perform acceptably on bolt action 7.62×51mm/.308 rifles as well), 762-AR10 Suppressor (designed for the AR-10/LAR-8 7.62mm/.308 rifle but will also work with any bolt-action rifle in .30 caliber or less) and 762-G3 Suppressor (designed for the Heckler & Koch G3 and fits the HK91 series of 7.62mm/.308 rifles, as well as the HK33 and HK93 series of 5.56×45mm rifles).
Small-caliber suppressors: Long version for 9mm carbines^[85] UTU for pistols, including M1911 and 9mm^[86]	2013-11November 2013	Muzzle device: Titanium pistol suppressor	SLM w/ Titanium	Oceania Defence Ltd. and Rapid Advanced Manufacturing	9x19mm Parabellum, .45 ACP
	Long version is designed to operate on 9×19mm Parabellum carbines firing fully automatic. It fits under the rail of a Samson or similar rail system on the AR-15-type rifle. This is a sealed can and is only suitable for use with jacketed bullets. Pistol version is designed with a Neilsen which allows it to be used with most of the common John Browning tilting-barrel designs, including the swinging-linked M1911 and the cam-lock system operated Glock pistols. The Neilsen is an assembly in the aft end of the suppressor that allows the gasses to push the suppressor forward while allowing the unimpeded rearward movement of the barrel and slide assembly using a stainless steel spring and titanium piston. It is able to function well with a wide range of ammo, although its sound reduction performs best with subsonic bullets heavier than 124 grains, with 147 or 158 grain bullets being the quietest. It is designed to be run wet or dry, averaging 127.7–128.4 dBA with 147 grain or 127.6–134.2 dBA with 124 grain when dry and 123.1 dBA with 147 grain or 129.1 dBA with 124 grain when wet. It is an additively manufactured titanium weapon suppressor. It is 50% lighter than some conventional steel suppressors
The Israel drum magazine^[87] ^[88]	2013-12December 2013	Magazine: AR-15 rifle 75-round STANAG drum magazine	FDM	FOSSCAD members	.223 Rem/ 5.56x45
	A 75-round drum magazine for .223 Remington/5.56 NATO AR-15 rifles.
The Yee drum magazine	2013-12December 2013	Magazine: AK-family drum magazine	FDM	FOSSCAD members	7.62x39mm
	75-round drum magazine for 7.62×39mm AK-pattern rifles (e.g. AK-47, AK-102, AK-104 and compatible variants).
SKS grip and stock^[89]	2014-05May 2014	Part: SKS rifle grip and stock	FDM	FOSSCAD members
Škorpion vz. 61 grip and stock	2014-05May 2014	Part: Škorpion vz. 61 sub machinegun grip and stock	FDM	FOSSCAD members
Menendez Mag^[90]	2018-07August 2019 (v1);March 2021 (v2)	Part: Glock 17/19 Magazine	FDM	Deterrence Dispensed	9×19mm Parabellum
	Dry fire testing of the v2 design suggested a lifetime of over 1000 rounds.
The “Moms Demand Full Auto” Swift Link	October 2019	Part: AR-15 swift link	FDM	FreeMenDontAsk
Yankee Boogle^[91]	April 2020	Part: Autosear for AR-15 pattern rifles	FDM	Deterrence Dispensed / Patrick Henry	.223 Rem/ 5.56x45
	A fully printable swift link that enables full-auto fire by pressing on the disconnector. Compatible with most AR-15 lowers. Classified as a machine gun by the ATF.^[92]
'Make Glocks Full Auto' Glock Autosear^[93] ^[94]	April 2020	Part: Glock autosear	FDM	digitalmaniac / FreeMenDontAsk

Glossary of acronyms

FFF

Fused filament fabrication, a process that squeezes a molten filament.

FDM

Fused deposition modeling, a trademarked term for FFF.

DMLS / SLM

Direct metal laser sintering, a process that fuses metal powder by sintering.

SLM

Selective laser melting, a process that fuses metal powder by melting.

ABS

Acrylonitrile butadiene styrene, a common thermoplastic with relatively high heat resistance.

ABSplus is a stronger, proprietary blend of ABS by Stratasys.

PLA

Polylactic acid, a bio-plastic. Easier to print, stiffer, and more brittle than other plastics.

PLA+ is a term for any blend that enhances some characteristic.

PETG

Polyethylene terephthalate (glycol-modified), a plastic made by changing the chemicals used to synthesize the more common PET. Easier to print than ABS, and moderately better heat resistance than PLA.

Often used in consumer-level printers when creators desire better heat resistance than PLA+ or need more flexibility.

ECM

Electrochemical machining, a process that uses electricity to chemically machine metal. Commonly used in 3D printed firearms to create DIY barrels with rifling, greatly increasing accuracy.FCG

Fire control group, the trigger mechanism of a firearm. Commonly used to refer to the AR-15 fire control group.

See also

• 3D printing
• Defense Distributed
• Gun control
• Gun politics in the United States
• Improvised firearm

External links

• DEFCAD, the world’s largest repository for small arms technical data, July 2024

Notes and References

1. Web site: Greenberg. Andy. Meet The 'Liberator': Test-Firing The World's First Fully 3D-Printed Gun. Forbes. May 5, 2013. May 7, 2013.
2. http://3dprint.com/14636/3d-prnted-guns/ 5 Different 3D Printed Gun Models Have Been Fired Since May, 2013 – Here They Are
3. https://www.theguardian.com/technology/2013/nov/08/metal-3d-printed-gun-50-shots First metal 3D printed gun is capable of firing 50 shots
4. https://www.guns.com/news/2013/11/20/solid-concepts-3d-printed-1911-gets-version-2-0/ Solid Concepts 3D-printed 1911 gets version 2.0
5. Web site: Solid Concepts 3D Prints Another Metal Gun, 'Reason', a 10mm Auto 1911. Brittney Sevenson . 3dprint.com . 26 October 2014. 26 November 2021 .
6. Web site: 2023-03-14 . @empty_shell_llc on Instagram . 2024-02-10 . https://web.archive.org/web/20230314015746/https://www.instagram.com/p/9eGlKdQM_H/ . 2023-03-14 .
7. Web site: 2024-02-10 . Monolith Arms P-12 Shotgun - YouTube . . 2024-02-10 . https://web.archive.org/web/20240210124902/https://www.youtube.com/watch?v=VkLuhoVXSao . 2024-02-10 .
8. Web site: 2013-06-25 . Monolith Arms P-12: The P-90-like Shotgun That Never Was - . 2024-02-10 . The Firearm Blog . en-US.
9. Web site: Morelle . Rebecca . Rebecca Morelle . May 6, 2013 . Working gun made with 3D printer . live . https://web.archive.org/web/20140904175542/http://www.bbc.co.uk/news/science-environment-22421185 . 4 September 2014 . 28 July 2013 . BBC News.
10. Web site: Hutchinson . Lee . 3 May 2013 . The first entirely 3D-printed handgun is here . 13 May 2013 . Ars Technica.
11. http://www.inhale3d.com/tag/liberator/ 3D Printing Guns off the Download – Fact or Fiction?
12. http://www.cbsnews.com/news/liberator-gun-made-with-3d-printer-fires-first-successful-shot/ "Liberator" gun made with 3D printer fires first successful shot
13. http://www.nbcnews.com/tech/innovation/first-3-d-printed-rifle-fires-bullet-then-breaks-f8C10752930 First 3-D printed rifle fires bullet, then breaks
14. https://www.theverge.com/2013/8/4/4588162/worlds-first-3d-printed-rifle-the-grizzly-updated World's first 3D-printed rifle gets update, fires 14 shots
15. https://www.guns.com/news/2013/09/13/introducing-3d-printed-reprringer-pepperbox-video/ Introducing the 3D-printed Reprringer Pepperbox (VIDEO)
16. http://www.thefirearmblog.com/blog/2013/10/08/3d-printed-pepperbox-pistol/ 3D Printed Pepperbox Pistol
17. https://www.wired.co.uk/news/archive/2014-05/16/3d-printed-guns 3D printed guns a year on: from prototype to serious weapons
18. https://techcrunch.com/2014/05/08/japanese-man-arrested-for-printing-his-own-revolvers/ Japanese Man Arrested For Printing His Own Revolvers
19. http://www.3ders.org/articles/20140924-new-3d-printed-revolver-dedicated-to-yoshitomo-imura-in-development.html New 3D printed revolver dedicated to Yoshitomo Imura in development
20. https://techcrunch.com/2014/09/24/designer-builds-a-3d-printable-imura-revolver-in-honor-of-arrested-japanese-maker/ Designer Builds A 3D-Printable "Imura Revolver" In Honor Of Arrested Japanese Maker
21. http://3dprint.com/15556/3d-printable-gun-revolver/ A New 3D Printable Gun, The ‘Imura Revolver’ is Being Designed
22. http://versus.com/en/2014/09/26/5-alarming-3d-printed-guns 5 Alarming 3D Printed Guns
23. http://www.thetruthaboutguns.com/2014/09/dean-weingarten/the-next-phase-3d-printed-imura-revolver-hybrid-development/ The Next Phase: 3D Printed Imura Revolver Hybrid Development
24. Web site: Solid Concepts 3D Prints Another Metal Gun, 'Reason', a 10mm Auto 1911. 3DPrint.com. 26 October 2014 . 5 December 2014.
25. Web site: Solid Concepts Announces Another 3D-Printed Metal Gun. AOL. TechCrunch. 27 October 2014 . 5 December 2014.
26. Web site: 3ders.org - the world's second 3D printed metal gun revealed: The 'Reason' | 3D Printer News & 3D Printing News . dead . https://web.archive.org/web/20141101031912/http://www.3ders.org/articles/20141029-the-world-second-3d-printed-metal-gun-revealed-the-reason.html . 2014-11-01 . 2014-11-16.
27. Web site: 3D printing used to make first real handheld railgun, which fires plasma projectiles at 560 mph . October 19, 2015. 5 August 2016.
28. Web site: Guy creates handheld railgun with a 3D-printer . October 19, 2015. 5 August 2016.
29. Web site: PG22 - Reliable 3D Printed Gun with a Steel Barrel. YouTube.
30. Web site: Full-Auto 3D Printed Coilgun (Now Available!). YouTube.
31. Web site: July 12, 2018 . You Can Now Buy a Practical Gauss Gun . March 6, 2019.
32. Web site: How I Designed and Built the PG22 Maverick Revolver. YouTube.
33. Web site: C. Luke. The Rimfire Report: PG22 Maverick 22 Short 3D Printed Revolver. The Firearm Blog. 9 March 2020.
34. Web site: C . Luke . 2022-03-04 . The Pipe Hitter: TFB Reader Makes a DIY 37MM Launcher . 2024-01-18 . The Firearm Blog . en-US.
35. Web site: Denise Bertacchi . 2023-12-23 . I tried 3D printing a gun: It's not as easy as you think . 2024-01-18 . Tom's Hardware . en.
36. Web site: Murney . Michael . 2022-08-02 . Man sells dozens of 3D-printed guns to city at Houston's 1st gun buyback . 2023-12-21 . Chron . en.
37. Web site: 2023-10-02 . DS9 AR-Style Pistol 3D Printed . https://web.archive.org/web/20231002005410/https://3dgunbuilder.com/pistols/ds9-ar-style-pistol/ . dead . 2023-10-02 . 2024-03-24 .
38. https://twitter.com/DrDeath1776/status/1706381635736719553
39. News: Biggs . John . March 1, 2013 . Defense Distributed Prints An AR-15 Receiver That Has Fired More Than 600 Rounds . live . https://web.archive.org/web/20140825173804/http://techcrunch.com/2013/03/01/defense-distributed-prints-an-ar-15-receiver-that-has-fired-more-than-600-rounds/ . August 25, 2014 . April 12, 2013 . TechCrunch.
40. http://defdist.tumblr.com/post/44209819568/printed-ar-lower-v5-review Printed AR Lower v5 Review
41. http://www.outdoorhub.com/news/2013/05/22/3d-printed-hybrid-ar-15fn-p90-lower-and-12-gauge-slugs-make-web-debut/ 3D-printed Hybrid AR-15/FN P90 Lower and 12 Gauge Slugs Make Web Debut
42. Slowik, Max, Meet the Charon Family of 3D-Printable AR Lowers (Photos), 3 June 2013.
43. Slowik, Max, "3D Printing Community Updates Liberator with Rifle, Pepperbox and Glock-Powered ‘Shuty-9′", 1 July 2013.
44. http://grabcad.com/library/charon-v3-1 Charon V3
45. http://www.thefirearmblog.com/blog/2014/05/27/warfairys-3d-printable-ar-15-bullpup/ WarFairy’s 3D Printable AR-15 Bullpup
46. http://www.guns.com/2014/05/25/check-out-this-3d-printable-bullpup-for-ar-pattern-uppers/ Check out this 3D-printable bullpup for AR-pattern uppers
47. https://www.engadget.com/2015/03/26/great-now-3d-printed-rifles-can-fire-7-62mm-nato-rounds/ Great, now 3D-printed rifles can fire larger, deadlier rounds
48. 3D Yazıcıdan Üretilen Ölümcül Tüfek!
49. Web site: C . Luke . 2019-12-09 . This 3D Printed Hi-Point May Be the Cheapest Pistol in Existence . 2024-01-18 . The Firearm Blog . en-US.
50. Web site: 2020-10-29 . The AWCY 3D Printed Scz0rpion - Is a 3D printed Sub Gun Viable? . 2024-01-18 . The Firearm Blog . en-US.
51. Web site: 2020-10-29 . The AWCY 3D Printed Scz0rpion - Is a 3D printed Sub Gun Viable? . 2020-11-19 . The Firearm Blog . en-US.
52. Web site: AWCY? Scz0rpion 1000 rd crucible test . 2020-11-19 . gunstreamer.com.
53. Web site: 2021-09-10 . Ivan The Troll Introduces the 3011 Pistol - A 1911 that "Doesn't Suck" . 2024-01-18 . The Firearm Blog . en-US.
54. http://3dprint.com/8398/3d-printed-gun-semi-automatic/ 3D Printed Semi-automatic Ruger Charger Pistol is Assembled and Fired – ‘If you take my gun, I’ll print another!’
55. http://reason.com/blog/2014/07/07/3d-printed-semiautomatic-22-debuts-if-yo 3D-Printed Semiautomatic .22 Debuts. "If you take my gun, I will simply print another one."
56. http://www.ammoland.com/2014/07/3d-printed-ruger-charger-style-pistol-by-buck-o-fama/#axzz3EUU0yfrM 3D Printed Ruger Style Pistol Demo by Buck O’ Fama ~ Video
57. http://news.softpedia.com/news/3D-Printing-Lets-Man-Assemble-Ruger-Charger-Pistol-Without-Legal-Paperwork-449881.shtml 3D Printing Lets Man Assemble Ruger Charger Pistol Without Legal Paperwork
58. Web site: PD10 Pistol . 2024-01-18 . Avidity Arms . en-US.
59. Web site: S . Jeremy . 2023-09-01 . Gun Review: Avidity Arms PD10 9mm Pistol . 2024-01-18 . The Truth About Guns . en.
60. Web site: Arms . Avidity . 2023-05-09 . 3DPD10 Parts Kit at JSD Supply! . 2023-12-21 . Avidity Arms . en-US.
61. Web site: Nylaug – The 3D Printed AUG – GunCAD Evolved – The Evolution Of GunCAD . 2024-01-18 . www.nylaug.com.
62. Branson . Michael . April 8, 2013 . Defense Distributed Releases Printable AK Magazine . live . The Firearm Blog . April 12, 2013 . https://web.archive.org/web/20140924042603/http://www.thefirearmblog.com/blog/2013/04/08/defense-distributed-releases-printable-ak-magazine/ . September 24, 2014. .
63. News: Greenberg . Andy . January 14, 2013 . Gunsmiths 3D-Print High Capacity Ammo Clips To Thwart Proposed Gun Laws . live . https://web.archive.org/web/20140830171721/http://www.forbes.com/sites/andygreenberg/2013/01/14/gunsmiths-3d-print-high-capacity-ammo-clips-to-thwart-proposed-gun-laws/ . August 30, 2014 . April 12, 2013 . Forbes Online.
64. http://www.ammoland.com/2013/03/3d-printed-ar15-magazine/#axzz3ChRscSHd A Printed AR-15 Magazine
65. News: Franzen . Carl . February 7, 2013 . Defense Distributed Unveils New 3D Printed Gun Magazine 'Cuomo' (video) . dead . https://web.archive.org/web/20130211003722/http://idealab.talkingpointsmemo.com/2013/02/defense-distributed-unveils-new-3d-printed-gun-magazine-cuomo-video.php . February 11, 2013 . April 12, 2013 . Talking Points Memo.
66. News: Beckhusen . Robert . February 8, 2013 . New 3-D Printed Rifle Magazine Lets You Fire Hundreds of Rounds . April 12, 2013 . Wired Danger Room.
67. http://www.extremetech.com/extreme/145664-3d-printed-30-round-ar-magazine-brings-us-ever-closer-to-a-fully-3d-printed-gun 3D-printed 30-round AR magazine brings us ever closer to a fully 3D-printed gun
68. News: Ingersoll . Geoffrey . March 8, 2013 . 3D Printing Company Names AK-47 Magazine After Gun Control Congresswoman . live . https://web.archive.org/web/20140924040759/http://www.businessinsider.com/defense-distributed-feinstein-ak-mag-2013-3 . September 24, 2014 . April 12, 2013 . Business Insider.
69. http://www.huffingtonpost.com/2013/03/08/feinstein-ak-magazine_n_2838366.html Defense Distributed's 'Feinstein AK Magazine' Named After Gun Control Advocate Sen. Dianne Feinstein
70. https://www.forbes.com/sites/andygreenberg/2013/05/08/3d-printed-guns-blueprints-downloaded-100000-times-in-two-days-with-some-help-from-kim-dotcom/ 3D-Printed Gun's Blueprints Downloaded 100,000 Times In Two Days (With Some Help From Kim Dotcom)
71. https://www.wired.com/2013/05/3d-printed-bullets/ 3-D Printed Shotgun Slugs Blow Away Their Targets
72. http://www.huffingtonpost.com/2013/05/23/3d-printed-bullets_n_3322370.html 3D-Printed Bullets Exist, And They're Terrifyingly Easy To Make
73. http://www.gizmag.com/sintercore-auxetik-3d-printed-muzzle-brake-inconel/28489/ Sintercore creates first commercial 3D printed metallic firearm component
74. http://www.thefirearmblog.com/blog/2014/08/26/sintercore-3dx-muzzle-brake/ Sintercore 3DX Muzzle Brake
75. Web site: 2018-12-06 . First Look: Walker Defense Research NERO Tactical Muzzle Brake . 2019-02-04 . Personal Defense World . en-US.
76. Web site: NERO 556 AR15 Muzzle Brake, 3D Printed Inconel . 2019-02-04 . Walker Defense Research LLC.
77. Web site: 2018-05-24. VIDEO: The Walker Defense NERO 556 Brake Rocks in Full-Auto. 2019-02-04. Tactical Life Gun Magazine: Gun News and Gun Reviews. en-US.
78. Web site: Product Preview: Walker Defense Research NERO 556 Tactical Muzzle Brake. www.americanrifleman.org. en. 2019-02-04.
79. http://oceania-defence.com/index.php?main_page=index&cPath=41_42 556 Suppressors
80. Web site: 20 November 2013 . Hi-tech printers at home in Bay . dead . https://web.archive.org/web/20140910200130/http://www.nzherald.co.nz/bay-of-plenty-times/business/news/article.cfm?c_id=1503347&objectid=11160159 . 10 September 2014 . 9 September 2014 . New Zealand Herald.
81. http://www.metal-am.com/articles/002735.html New Zealand leads the way in Titanium Additive Manufacturing
82. http://3dprintingsystems.com/silencing-the-sound-layer-by-layer-video/ Silencing the sound, Layer by layer Video
83. http://www.tida.co.nz/upload/files/TiDA-Talk-July-2013-final-1.pdf TiDA Talk
84. http://oceania-defence.com/index.php?main_page=index&cPath=41_43 762 Suppressor
85. http://oceania-defence.com/index.php?main_page=product_info&cPath=41_47&products_id=70 9mm Carbine Long
86. http://oceania-defence.com/index.php?main_page=product_info&cPath=41_48&products_id=73 UTU 9mm Titanium Pistol Suppressor with Neilsen
87. http://www.guns.com/2013/12/23/3d-printed-75-round-drum-mags-meet-israel-yee-photosvideo/ 3D-printed 75-round drum mags: Meet the ‘Israel’ and the ‘Yee’ (Photos + Video)
88. http://www.thetruthaboutguns.com/2013/12/foghorn/fosscad-unveils-3d-printable-75-round-drum-magazine-ar-15-rifles/ FOSSCAD Unveils 3D Printable 75 Round Drum Magazine for AR-15 Rifles
89. http://natocouncil.ca/a-dark-side-of-3d-printers-printed-guns/ A Dark Side of 3D Printers: Printed Guns
90. Web site: Pete . 2019-07-19 . Can't Stop The Signal: DIY 3D Printed GLOCK Magazines . 2024-01-18 . The Firearm Blog . en-US.
91. Web site: Yankee Boogle 3D Printable AR15 Full-Auto Mod (Swift Link) . 2020-11-29 . LBRY.
92. Web site: 1981-4 - Auto Sear Bureau of Alcohol, Tobacco, Firearms and Explosives . 2023-12-21 . www.atf.gov.
93. Web site: 'Make Glocks Full Auto' Glock autosear . 2023-12-21 . Odysee.
94. Web site: 2023-04-12 . Law enforcement and lawmakers target 3D-printed devices that turn handguns into machine guns . 2024-01-18 . WRTV Indianapolis . en.

This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "List of 3D printed weapons and parts".

Except where otherwise indicated, Everything.Explained.Today is © Copyright 2009-2024, A B Cryer, All Rights Reserved. Cookie policy.