Enthalpy of vaporization explained

In thermodynamics, the enthalpy of vaporization (symbol), also known as the (latent) heat of vaporization or heat of evaporation, is the amount of energy (enthalpy) that must be added to a liquid substance to transform a quantity of that substance into a gas. The enthalpy of vaporization is a function of the pressure and temperature at which the transformation (vaporization or evaporation) takes place.

The enthalpy of vaporization is often quoted for the normal boiling temperature of the substance. Although tabulated values are usually corrected to 298 K, that correction is often smaller than the uncertainty in the measured value.

The heat of vaporization is temperature-dependent, though a constant heat of vaporization can be assumed for small temperature ranges and for Reduced temperature . The heat of vaporization diminishes with increasing temperature and it vanishes completely at a certain point called the critical temperature . Above the critical temperature, the liquid and vapor phases are indistinguishable, and the substance is called a supercritical fluid.

Units

Values are usually quoted in J/mol, or kJ/mol (molar enthalpy of vaporization), although kJ/kg, or J/g (specific heat of vaporization), and older units like kcal/mol, cal/g and Btu/lb are sometimes still used among others.

Enthalpy of condensation

The enthalpy of condensation (or heat of condensation) is by definition equal to the enthalpy of vaporization with the opposite sign: enthalpy changes of vaporization are always positive (heat is absorbed by the substance), whereas enthalpy changes of condensation are always negative (heat is released by the substance).

Thermodynamic background

The enthalpy of vaporization can be written as

\DeltaHvap=\DeltaUvap+p\DeltaV

It is equal to the increased internal energy of the vapor phase compared with the liquid phase, plus the work done against ambient pressure. The increase in the internal energy can be viewed as the energy required to overcome the intermolecular interactions in the liquid (or solid, in the case of sublimation). Hence helium has a particularly low enthalpy of vaporization, 0.0845 kJ/mol, as the van der Waals forces between helium atoms are particularly weak. On the other hand, the molecules in liquid water are held together by relatively strong hydrogen bonds, and its enthalpy of vaporization, 40.65 kJ/mol, is more than five times the energy required to heat the same quantity of water from 0 °C to 100 °C (cp = 75.3 J/K·mol). Care must be taken, however, when using enthalpies of vaporization to measure the strength of intermolecular forces, as these forces may persist to an extent in the gas phase (as is the case with hydrogen fluoride), and so the calculated value of the bond strength will be too low. This is particularly true of metals, which often form covalently bonded molecules in the gas phase: in these cases, the enthalpy of atomization must be used to obtain a true value of the bond energy.

An alternative description is to view the enthalpy of condensation as the heat which must be released to the surroundings to compensate for the drop in entropy when a gas condenses to a liquid. As the liquid and gas are in equilibrium at the boiling point (Tb), ΔvG = 0, which leads to:

\DeltavS=Sgas-Sliquid=

\DeltavH
Tb

As neither entropy nor enthalpy vary greatly with temperature, it is normal to use the tabulated standard values without any correction for the difference in temperature from 298 K. A correction must be made if the pressure is different from 100 kPa, as the entropy of a gas is proportional to its pressure (or, more precisely, to its fugacity): the entropies of liquids vary little with pressure, as the compressibility of a liquid is small.

These two definitions are equivalent: the boiling point is the temperature at which the increased entropy of the gas phase overcomes the intermolecular forces. As a given quantity of matter always has a higher entropy in the gas phase than in a condensed phase (

\DeltavS

is always positive), and from

\DeltaG=\DeltaH-T\DeltaS

,

the Gibbs free energy change falls with increasing temperature: gases are favored at higher temperatures, as is observed in practice.

Vaporization enthalpy of electrolyte solutions

Estimation of the enthalpy of vaporization of electrolyte solutions can be simply carried out using equations based on the chemical thermodynamic models, such as Pitzer model[1] or TCPC model.[2]

Selected values

Elements

Enthalpies of vaporization of the elements
123456789101112131415161718
Group →
↓ Period
1
2
3
4
5
6
7

 
Enthalpy in kJ/mol, measured at their respective normal boiling points
0 - 10 kJ/mol10 - 100 kJ/mol100 - 300 kJ/mol>300 kJ/mol

The vaporization of metals is a key step in metal vapor synthesis, which exploits the increased reactivity of metal atoms or small particles relative to the bulk elements.

Other common substances

Enthalpies of vaporization of common substances, measured at their respective standard boiling points:

CompoundBoiling point, at normal pressureHeat of vaporization
(K)(°C)(°F)(kJ/mol) (J/g)
Acetone329 56 13331.300538.9
Aluminium2792 2519 4566294.010500
Ammonia240 −33.34 −2823.351371
Butane272–274 −1 30–3421.0320
Diethyl ether307.8 34.6 94.326.17353.1
Ethanol352 78.37 17338.6841
Hydrogen (parahydrogen)20.271 −252.879 −423.1820.8992446.1
Iron3134 2862 51823406090
Isopropyl alcohol356 82.6 18144732.2
Methane112 −161 −2598.170480.6
Methanol338 64.7 14835.2[3] 1104
Propane231 −42 −4415.7356
Phosphine185 −87.7 −12614.6429.4
Water373.15 100 21240.662257

See also

References

Notes and References

  1. Ge. Xinlei. Wang. Xidong. Estimation of Freezing Point Depression, Boiling Point Elevation, and Vaporization Enthalpies of Electrolyte Solutions. Industrial & Engineering Chemistry Research. 20 May 2009. 48. 10. 5123. 10.1021/ie900434h. free.
  2. Ge. Xinlei. Wang. Xidong. Calculations of Freezing Point Depression, Boiling Point Elevation, Vapor Pressure and Enthalpies of Vaporization of Electrolyte Solutions by a Modified Three-Characteristic Parameter Correlation Model. Journal of Solution Chemistry. 38. 9. 2009. 1097–1117. 0095-9782. 10.1007/s10953-009-9433-0. 96186176.
  3. NIST