Horseshoe curve explained

See also: Hairpin turn.

A horseshoe curve is a class of climbing curve in a roadbed that reverses turn direction (inflection) twice on either side of a single tight curve that varies through an angle of about 180 degrees or more.

Such curves are more commonly found in a railway line but are also used in roads. The characteristic U shape, or even slight balloon shape, of such a curve resembles a horseshoe. On roadways, particularly tight versions of such curves are typically called hairpin turns.

Theory

A horseshoe curve is a means to lengthen an ascending or descending grade and thereby reduce the maximum gradient. Grade or gradient is defined as the rise divided by the run (length) or distance, so in principle such curves add to length for the same altitude gain, just as would a climbing spiral around one or more peaks, or a climbing traverse (cutting) wrapping around an end of a ridge.

If the straight route between two points is too steep to climb, a more circuitous route will increase the distance traveled, allowing the difference in altitude to be averaged over a longer track (or road) length. Unlike a spiral, a horseshoe curve does not involve the track crossing over itself, and the full horseshoe involves both relatively straight sections, curve deflections in both directions and tightly curved segment; while a spiral generally has a more uniform curvature. Obviously, a horseshoe also gives rise to a severe change in direction requiring another corrective curve to regain displacement in the overall direction of travel, while a spiral generally does not.

A horseshoe curve is sometimes used where the route bridges a deep gully. Deviating from a straight-line route along the edge of the gully may allow it to be crossed at a better location.

Horseshoe curves are common on railway lines in steeply graded or hilly country, where means must be found to achieve acceptable grades and minimize construction costs. As with spirals, the main limitation in laying out a horseshoe is keeping its radius as large as possible, as sharp curves limit train speed, and through increased friction, are harder on rails, requiring more frequent replacement of outer tracks.

Examples

Europe

Germany

Norway

Poland

Slovakia

United Kingdom

North America

United States

Pennsylvania

Alaska

California

Colorado

Horseshoe curves were used extensively on the many narrow gauge railroads in the Colorado Rocky Mountains, now mostly abandoned,[4] for example:

Idaho

Maryland

Montana

Nevada

New York

Oregon

Utah

Washington

Canada

British Columbia

Asia

China

Jiangsu

Shaanxi

Sichuan

Xinjiang

Yunnan

Gansu

Qinghai

Iran

Japan

Oceania

Australia

New Zealand

References

Notes and References

  1. Avslutningsrapport for Dovrebanen: avgit til Den kgl. norske regjerings departement for de offentlige arbeider. Oslo: Baneforlaget. 1926 (original), 2000 (reprint). .
  2. Prince, B.D. The Alaska Railroad in Pictures 1914-1964, Ken Wray's Print Shop, Anchorage, 1964
  3. Book: Crump, Spencer . Redwoods, Iron Horses, and the Pacific . California Western Railroad . Fifth . 1998 . Fort Bragg, California . 60 . 0-918376-12-2.
  4. Ormes, R.M. Tracking Ghost Railroads in Colorado, Century One Press 1975 (Contains extensive local maps identifying railroad names and dates of service).
  5. Book: Bender, Henry E Jr. . Uintah Railway: The Gilsonite Route . Howell-North Books . 1970 . Berkeley, California . 42 . 0-8310-7080-3.
  6. Web site: 铁影 – 宏伟壮丽的展线群——成昆铁路运转记其四 . Iron Shadow – The magnificent railway line group - the fourth chapter of the operation of Chengdu-Kunming Railway . Chinese . 2017-07-17 . 2024-08-08.
  7. Book: John Brian Hollingsworth. Atlas of the world's railways. 1982. Bison.
  8. Book: Hugh Hughes. Middle East railways. 1981. Continental Railway Circle.