Free-space optical communication (FSO) is an optical communication technology that uses light propagating in free space to wirelessly transmit data for telecommunications or computer networking. "Free space" means air, outer space, vacuum, or something similar. This contrasts with using solids such as optical fiber cable.
The technology is useful where the physical connections are impractical due to high costs or other considerations.
Optical communications, in various forms, have been used for thousands of years. The ancient Greeks used a coded alphabetic system of signalling with torches developed by Cleoxenus, Democleitus and Polybius.[1] In the modern era, semaphores and wireless solar telegraphs called heliographs were developed, using coded signals to communicate with their recipients.
In 1880, Alexander Graham Bell and his assistant Charles Sumner Tainter created the photophone, at Bell's newly established Volta Laboratory in Washington, DC. Bell considered it his most important invention. The device allowed for the transmission of sound on a beam of light. On June 3, 1880, Bell conducted the world's first wireless telephone transmission between two buildings, some 213abbr=offNaNabbr=off apart.[2] [3]
Its first practical use came in military communication systems many decades later, first for optical telegraphy. German colonial troops used heliograph telegraphy transmitters during the Herero Wars starting in 1904, in German South-West Africa (today's Namibia) as did British, French, US or Ottoman signals.
During the trench warfare of World War I when wire communications were often cut, German signals used three types of optical Morse transmitters called German: Blinkgerät, the intermediate type for distances of up to 4km (02miles) at daylight and of up to 8km (05miles) at night, using red filters for undetected communications. Optical telephone communications were tested at the end of the war, but not introduced at troop level. In addition, special blinkgeräts were used for communication with airplanes, balloons, and tanks, with varying success.
A major technological step was to replace the Morse code by modulating optical waves in speech transmission. Carl Zeiss, Jena developed the German: Lichtsprechgerät 80/80 (literal translation: optical speaking device) that the German army used in their World War II anti-aircraft defense units, or in bunkers at the Atlantic Wall.[4]
The invention of lasers in the 1960s revolutionized free-space optics. Military organizations were particularly interested and boosted their development. However, the technology lost market momentum when the installation of optical fiber networks for civilian uses was at its peak.
Many simple and inexpensive consumer remote controls use low-speed communication using infrared (IR) light. This is known as consumer IR technologies.
Free-space point-to-point optical links can be implemented using infrared laser light, although low-data-rate communication over short distances is possible using LEDs. Infrared Data Association (IrDA) technology is a very simple form of free-space optical communications. On the communications side the FSO technology is considered as a part of the optical wireless communications applications. Free-space optics can be used for communications between spacecraft.[5]
The reliability of FSO units has always been a problem for commercial telecommunications. Consistently, studies find too many dropped packets and signal errors over small ranges (400mto500mm (1,300feetto1,600feetm)). This is from both independent studies, such as in the Czech Republic,[6] as well as internal studies, such as one conducted by MRV FSO staff.[7]
Military based studies consistently produce longer estimates for reliability, projecting the maximum range for terrestrial links is of the order of 2to.[8] All studies agree the stability and quality of the link is highly dependent on atmospheric factors such as rain, fog, dust and heat. Relays may be employed to extend the range for FSO communications.[9] [10]
TMEX USA ran two eight-mile links between Laredo, Texas and Nuevo Laredo, Mexico from 1998[11] to 2002. The links operated at 155 Mbit/s and reliably carried phone calls and internet service.[12]
The main reason terrestrial communications have been limited to non-commercial telecommunications functions is fog. Fog often prevents FSO laser links over from achieving a year-round availability sufficient for commercial services. Several entities are continually attempting to overcome these key disadvantages to FSO communications and field a system with a better quality of service. DARPA has sponsored over US$130 million in research toward this effort, with the ORCA and ORCLE programs.[13] [14] [15]
Other non-government groups are fielding tests to evaluate different technologies that some claim have the ability to address key FSO adoption challenges., none have fielded a working system that addresses the most common atmospheric events.
FSO research from 1998 to 2006 in the private sector totaled $407.1 million, divided primarily among four start-up companies. All four failed to deliver products that would meet telecommunications quality and distance standards:[16]
One private company published a paper on November 20, 2014, claiming they had achieved commercial reliability (99.999% availability) in extreme fog. There is no indication this product is currently commercially available.[24]
See also: Laser communication in space.
The massive advantages of laser communication in space have multiple space agencies racing to develop a stable space communication platform, with many significant demonstrations and achievements.
The first gigabit laser-based communication was achieved by the European Space Agency and called the European Data Relay System (EDRS) on November 28, 2014. The system is operational and is being used on a daily basis.
In December 2023, the Australian National University (ANU) demonstrated its Quantum Optical Ground Station at its Mount Stromlo Observatory. QOGS uses adaptive optics and lasers as part of a telescope, to create a bi-directional communications system capable of supporting the NASA Artemis program to the Moon.[25]
A two-way distance record for communication was set by the Mercury laser altimeter instrument aboard the MESSENGER spacecraft. It was able to communicate across a distance of 24e6km, as the craft neared Earth on a fly-by in May, 2005. The previous record had been set with a one-way detection of laser light from Earth by the Galileo probe, of 6e6km in 1992.
In January 2013, NASA used lasers to beam an image of the Mona Lisa to the Lunar Reconnaissance Orbiter roughly 390000km (240,000miles) away. To compensate for atmospheric interference, an error correction code algorithm similar to that used in CDs was implemented.[26]
In the early morning hours of Oct. 18, 2013, NASA's Lunar Laser Communication Demonstration (LLCD) transmitted data from lunar orbit to Earth at a rate of 622 megabits per second (Mbit/s).[27] LLCD was flown aboard the Lunar Atmosphere and Dust Environment Explorer (LADEE) spacecraft, whose primary science mission was to investigate the tenuous and exotic atmosphere that exists around the Moon.
Between April and July 2014 NASA's OPALS instrument successfully uploaded 175 megabytes in 3.5 seconds and downloaded 200–300 MB in 20 s.[28] Their system was also able to re-acquire tracking after the signal was lost due to cloud cover.
On Dec. 7, 2021 NASA launched the Laser Communications Relay Demonstration (LCRD), which aims to relay data between spacecraft in geosynchronous orbit and ground stations. LCRD is NASA's first two-way, end-to-end optical relay. LCRD uses two ground stations, Optical Ground Station (OGS)-1 and -2, at Table Mountain Observatory in California, and Haleakalā, Hawaii.[29] One of LCRD's first operational users is the Integrated LCRD Low-Earth Orbit User Modem and Amplifier Terminal (ILLUMA-T), on the International Space Station. The terminal will receive high-resolution science data from experiments and instruments on board the space station and then transfer this data to LCRD, which will then transmit it to a ground station. After the data arrives on Earth, it will be delivered to mission operation centers and mission scientists. The ILLUMA-T payload was sent to the ISS in late 2023 on SpaceX CRS-29, and achieved first light on 5 December 2023.[30] [31]
On April 28, 2023, NASA and its partners achieved 200 gigabit per second (Gbps) throughput on a space-to-ground optical link between a satellite in orbit and Earth. This was achieved by the TeraByte InfraRed Delivery (TBIRD) system, mounted on NASA's Pathfinder Technology Demonstrator 3 (PTD-3) satellite.[32]
Various satellite constellations that are intended to provide global broadband coverage, such as SpaceX Starlink, employ laser communication for inter-satellite links. This effectively creates a space-based optical mesh network between the satellites.
In 2001, Twibright Labs released RONJA Metropolis, an open source DIY 10 Mbit/s full duplex LED FSO over .[33] [34]
In 2004, a Visible Light Communication Consortium was formed in Japan.[35] This was based on work from researchers that used a white LED-based space lighting system for indoor local area network (LAN) communications. These systems present advantages over traditional UHF RF-based systems from improved isolation between systems, the size and cost of receivers/transmitters, RF licensing laws and by combining space lighting and communication into the same system.[36] In January 2009, a task force for visible light communication was formed by the Institute of Electrical and Electronics Engineers working group for wireless personal area network standards known as IEEE 802.15.7.[37] A trial was announced in 2010, in St. Cloud, Minnesota.[38]
Amateur radio operators have achieved significantly farther distances using incoherent sources of light from high-intensity LEDs. One reported 278km (173miles) in 2007.[39] However, physical limitations of the equipment used limited bandwidths to about 4 kHz. The high sensitivities required of the detector to cover such distances made the internal capacitance of the photodiode used a dominant factor in the high-impedance amplifier which followed it, thus naturally forming a low-pass filter with a cut-off frequency in the 4 kHz range. Lasers can reach very high data rates which are comparable to fiber communications.
Projected data rates and future data rate claims vary. A low-cost white LED (GaN-phosphor) which could be used for space lighting can typically be modulated up to 20 MHz.[40] Data rates of over 100 Mbit/s can be achieved using efficient modulation schemes and Siemens claimed to have achieved over 500 Mbit/s in 2010.[41] Research published in 2009, used a similar system for traffic control of automated vehicles with LED traffic lights.[42]
In September 2013, pureLiFi, the Edinburgh start-up working on Li-Fi, also demonstrated high speed point-to-point connectivity using any off-the-shelf LED light bulb. In previous work, high bandwidth specialist LEDs have been used to achieve the high data rates. The new system, the Li-1st, maximizes the available optical bandwidth for any LED device, thereby reducing the cost and improving the performance of deploying indoor FSO systems.[43]
Typically, the best scenarios for using this technology are:
The light beam can be very narrow, which makes FSO hard to intercept, improving security. It is comparatively easy to encrypt any data traveling across the FSO connection for additional security. FSO provides vastly improved electromagnetic interference (EMI) behavior compared to using microwaves.
For terrestrial applications, the principal limiting factors are:
These factors cause an attenuated receiver signal and lead to higher bit error ratio (BER). To overcome these issues, vendors found some solutions, like multi-beam or multi-path architectures, which use more than one sender and more than one receiver. Some state-of-the-art devices also have larger fade margin (extra power, reserved for rain, smog, fog). To keep an eye-safe environment, good FSO systems have a limited laser power density and support laser classes 1 or 1M. Atmospheric and fog attenuation, which are exponential in nature, limit practical range of FSO devices to several kilometres. However, free-space optics based on 1550 nm wavelength, have considerably lower optical loss than free-space optics using 830 nm wavelength, in dense fog conditions. FSO using wavelength 1550 nm system are capable of transmitting several times higher power than systems with 850 nm and are safe to the human eye (1M class). Additionally, some free-space optics, such as EC SYSTEM,[46] ensure higher connection reliability in bad weather conditions by constantly monitoring link quality to regulate laser diode transmission power with built-in automatic gain control.[46]