Foolscap folio, commonly contracted to foolscap or cap or folio and in short FC, is paper cut to the size of 8.5 × 13.5 in (216 × 343 mm) for printing or to 8 × 13 in (203 × 330 mm) for "normal" writing paper (foolscap).[1] This was a traditional paper size used in some parts of Europe, and the British Commonwealth, before the adoption of the international standard A4 paper.
A full (plano) foolscap[2] paper sheet is actually in size, and a folio sheet of any type is half the base sheet size.
| Foolscap folio | 8½ × 13½ | 216 × 343 ª | 1:1.5879 | Imperial (half foolscap), printing | |
|---|---|---|---|---|---|
| Foolscap folio | 8 × 13 | 203 × 330 | 1:1.6256 | Traditional British, writing [3] |
Ring binders or lever arch files designed to hold foolscap folios are often used to hold A4 paper . The slightly larger size of such a binder offers greater protection to the edges of the pages it contains.
Historically, there were two prevalent foolscap folio paper sizes: British foolscap and imperial foolscap. The British foolscap measured approximately 8.0 by 13.0 inches (203 mm by 330 mm) and was widely used in the United Kingdom for official documents and administrative records. On the other hand, the imperial foolscap was slightly larger, measuring around 8.5 by 13.5 inches (216 mm by 343 mm). This larger format was preferred in some regions of the British Empire for similar purposes. Both paper sizes represented an era when handwritten records and official documentation were prevalent, but they have since faded into history, replaced by contemporary paper standards.[4] [5]
Foolscap was named after the fool's cap and bells watermark commonly used from the 15th century onwards on paper of these dimensions.[6] [7] The earliest example of such paper was made in Germany in 1479. Unsubstantiated anecdotes suggest that this watermark was introduced to England in 1580 by John Spilman, a German who established a papermill at Dartford, Kent.[8]
The general pattern of the mark was used by Dutch and English papermakers in the late 17th and 18th centuries, and as early as 1674 the term "foolscap" was being used to designate a specific size of paper regardless of its watermark.[9]
Apocryphally, the Rump Parliament of 1648–1653 substituted a fool's cap for the royal arms as a watermark on the paper used for the journals of Parliament.[10] According to the Oxford Dictionary of Word Origins, there is no basis in fact for this statement.
In Mexico, the foolscap folio paper size is NaNinches×NaNinchesin (×in)[11] and is named (locally) oficio ('official').
Today in the United States, a half-foolscap sized paper for printing is standardized to NaNinches×14inchesin (×in), widely available and sold as "legal sized paper" for printing, writing, note-taking etc. A full foolscap size paper of 14inches×17inchesin (×in) is also widely available for arts and crafts etc. alongside the 11inches×17inchesin (×in) tabloid size.
In the United States in the 19th century, paper was sold either flat or folded in half. Folded foolscap was often NaNinches×16inchesin (×in), but smaller and larger sizes were also found.[12] Legal foolscap of 8inches×24inchesin (×in) was always sold ruled and folded in half at the printers by a folding machine, resulting in a leaflet 8inches×12inchesin (×in), almost the same as modern A4 paper, which is 8.27inches×11.69inchesin (×in)[12]
There were numerous other sizes with variations on the "cap" name:[12]
F4 [13] is a paper size .[14] Although metric, based on the A4 paper size, and named to suggest that it is part of the official ISO 216 paper sizes, it is only a de facto standard.
It is often referred to as (metric) "foolscap" or "folio" because of its similarity to the traditional foolscap folio size of .
