A floating dock, floating pier or floating jetty is a platform or ramp supported by pontoons. It is usually joined to the shore with a gangway. The pier is usually held in place by vertical poles referred to as pilings, which are embedded in the seafloor or by anchored cables.[1] Frequently used in marinas, this type of pier maintains a fixed vertical relationship to watercraft secured to it, independent of tidal, river or lake elevation. The angle of the gangway varies with the water level.
'Braby pontoon' was the name given to a type of floating dock used by flying boats in Australia and New Zealand from 1939 to the 1950s.[2] [3] Frederick Braby and Company was a British manufacturer of tanks and silos, Bailey bridges and pontoons.[4] [5] The Braby name was also attached to the general type of pontoon made with ship tanks, whether or not they were manufactured by Frederick Braby and Company.[6] [7] Two 1939 descriptions of a Braby pontoon in Auckland stated:
A new type of floating jetty will he used in Auckland for the berthing of the flying-boats. Mr. Turnill stated this morning that this type is known as the "Braby pontoon", and it has been used previously only at Southampton. It has been well tested there and has been found to be most satisfactory. It consists of two twin sections joined in an arc underneath the water.[8]and
Shaped like a U, the pontoon resembles a miniature floating dock, and consists of two parallel decks joined by a submerged framework. Tanks give the necessary buoyancy. When the flying-boat has landed, it is warped into position by the ground crew, and is drawn tail-first into the pontoon, coming to rest with the hull between the two sections of decking and above the submerged frame. Inflated buffers on the inner edge of the decking prevent the delicate hull from being damaged.A Braby pontoon constructed at Evans Bay in Wellington, New Zealand in 1951 consisted of 124 large square steel tanks connected together and ballasted with water and oil.[9] The pontoon was U-shaped, 110feet long and 74feet wide. Flying boats were winched tail-first into the U so that passengers could step onto the pontoon dock.[10]