De Havilland Fox Moth Explained

The DH.83 Fox Moth is a small biplane passenger aircraft from the 1930s powered by a single de Havilland Gipsy Major I inline inverted engine, manufactured by the de Havilland Aircraft Company.

The aircraft was designed late in 1931 as a low cost and economical light passenger aircraft. Many components, including the engine, tailplane, fin, rudder and wings were identical to those of the de Havilland DH.82 Tiger Moth, then being built in large quantities. These are fitted to a purpose-built fuselage, which has a plywood covering over longerons which are ash forward of the pilot and Sitka spruce aft. The pilot sits in a raised cockpit behind the small enclosed passenger cabin, which was usually fitted with three seats for short-range flights. The "Speed Model" was fitted with a canopy and fairing. The wings could be folded for storage.

Operational history

The prototype first flew on 29 January 1932, and was sent to Canada gaining sufficient interest that seven were assembled at the company's Toronto plant.[1] "Home" based production was shared evenly between sales within the United Kingdom and exports, with 49 aircraft each going onto the British register and being sent overseas.[1] British-based aircraft were mostly used on short-haul joyrides or as feeder flights around the British Isles. The DH.83 Fox Moth was the first aircraft to earn a profit in commercial airline service without subsidies.

Fox Moth VH-UQM Miss Currie was purchased by Victor Holyman for £1,450 and began operating over the 108-mile route over south-eastern Bass Strait between Launceston, Tasmania and Whitemark on Flinders Island in October 1932. It was thus the inaugural aircraft of what was to later become Australian National Airways. QANTAS used Fox Moths to replace de Havilland DH.50s on the Flying Doctor Service.[2]

Total production of the DH.83/DHC.83C Fox Moth was 153; 98 in England, two in Australia and 53 in Canada after WWII.[3] A number of different engines were used, including the 130 hp (97 kW) Gipsy IIIA on most British-built aircraft and the 145 hp (108 kW) Gipsy Major 1C on the 53 postwar DH.83C Canadian-built aircraft. The DHC-83Cs were fitted with larger pilot cockpit openings, a larger windscreen and canopy, a large ambulance cabin door on the port side to accommodate a stretcher, and did not have folding wings. The DH.83C used DH.82 Tiger Moth main and tail landing gear. The DH.83C was an excellent and economical bush plane.

Variants

Operators

Military

Brazil

Canada

South Africa

Spain

Civilian

Canada

Survivors

Bibliography

External links

Notes and References

  1. Jackson 1987, p. 322.
  2. Jackson 1987, pp. 324–325.
  3. Jackson 1987, p. 327.
  4. Mikesh and Abe 1990, p. 88.
  5. Fillmore Air Britain Archive Autumn 2011, p. 118
  6. Arthur 1992, p. 23
  7. Fillmore Air Britain Archive Autumn 2011, p. 107