Conditional symmetric instability explained

Conditional symmetric instability, or CSI, is a form of convective instability in a fluid subject to temperature differences in a uniform rotation frame of reference while it is thermally stable in the vertical and dynamically in the horizontal (inertial stability). The instability in this case develop only in an inclined plane with respect to the two axes mentioned and that is why it can give rise to a so-called "slantwise convection" if the air parcel is almost saturated and moved laterally and vertically in a CSI area. This concept is mainly used in meteorology to explain the mesoscale formation of intense precipitation bands in an otherwise stable region, such as in front of a warm front.[1] [2] The same phenomenon is also applicable to oceanography.

Principle

Hydrostatic stability

See main article: Lapse rate. An air particle at a certain altitude will be stable if its adiabatically modified temperature during an ascent is equal to or cooler than the environment. Similarly, it is stable if its temperature is equal or warmer during a descent. In the case where the temperature is equal, the particle will remain at the new altitude, while in the other cases, it will return to its initial level4.

In the diagram on the right, the yellow line represents a raised particle whose temperature remains at first under that of the environment (stable air) which entails no convection. Then in the animation, there is warming surface warming and the raised particle remains warmer than the environment (unstable air). A measure of hydrostatic stability is to record the variation with the vertical of the equivalent potential temperature (

\thetae

):[3]

\thetae

diminish with altitude leads to unstable airmass

\thetae

remains the same with altitude leads to neutral airmass

\thetae

increase with altitude leads to stable airmass.

Inertial Stability

In the same way, a lateral displacement of an air particle changes its absolute vorticity

η

. This is given by the sum of the planetary vorticity,

f

, and

\zeta

, the geostrophic (or relative) vorticity of the parcel:[3] [4]

Where :

v

and

u

are the meridional and zonal geostrophic velocities respectively.

x

and

y

correspond to the zonal and meridional coordinates.

f

is the Coriolis parameter, which describes the component of vorticity around the local vertical that results from the rotation of the reference frame.

\zeta

is the relative vorticity around the local vertical. It is found by taking the vertical component of the curl of the geostrophic velocity.

η

can be positive, null or negative depending on the conditions in which the move is made. As the absolute vortex is almost always positive on the synoptic scale, one can consider that the atmosphere is generally stable for lateral movement. Inertial stability is low only when

η

is close to zero. Since

f

is always positive,

η\le0

can be satisfied only on the anticyclonic side of a strong maximum of jet stream or in a barometric ridge at altitude, where the derivative velocities in the direction of displacement in the equation give a significant negative value.

The variation of the angular momentum indicate the stability:[3] [5] [6]

\DeltaMg=0

, the particle then remains at the new position because its momentum has not changed

\DeltaMg>0

, the particle returns to its original position because its momentum is greater than that of the environment

\DeltaMg<0

, the particle continues its displacement because its momentum is smaller than that of the environment.

Slantwise movement

Under certain stable hydrostatic and inertial conditions, slantwise displacement may, however, be unstable when the particle changes air mass or wind regime. The figure on the right shows such a situation. The displacement of the air particle is done with respect to kinetic moment lines (

\scriptstyleMg

) that increase from left to right and equivalent potential temperature (

\scriptstyle\thetae

) that increase with height.
Lateral movement AHorizontal accelerations (to the left or right of a surface

\scriptstyleMg

) are due to an increase/decrease in the

\scriptstyleMg

of the environment in which the particle moves. In these cases, the particle accelerates or slows down to adjust to its new environment. Particule A undergoes a horizontal acceleration that gives it positive buoyancy as it moves to colder air and decelerates as it moves to a region of smaller

\scriptstyleMg

. The particle rises and eventually becomes colder than its new environment. At this point, it has negative buoyancy and begins to descend. In doing so,

\scriptstyleMg

increases and the particle returns to its original position.[5] [6]
Vertical displacement BVertical movements in this case result in negative buoyancy as the particle encounters warmer air (

\scriptstyle\thetae

increases with height) and horizontal acceleration as it moves to larger surfaces

\scriptstyleMg

. As the particle goes down, its

\scriptstyleMg

decreases to fit the environment and the particle returns to B.[5] [6]
Slantwise displacement COnly case C is unstable. Horizontal acceleration combines with a vertical upward disturbance and allows oblique displacement. Indeed, the

\scriptstyle\thetae

of the particle is larger than the

\scriptstyle\thetae

of the environment. While the momentum of the particle is less than that of the environment. An oblique displacement thus produces a positive buoyancy and an acceleration in the oblique displacement direction which reinforces it.[5]

The condition for having conditional symmetric instability in an otherwise stable situation is therefore that:[3] [5] [6]

\scriptstyle\thetae

is greater than that of

\scriptstyleMg

Potential effects

CSI is usually embedded in large areas of vertical upward motion. The ideal situation is a geostrophic flow from the South with wind speeds that increase with height. The environment is well mixed and close to saturation. Since the flow is unidirectional, the u component of the wind can be set equal to zero, which establishes a symmetrical flow perpendicular to the temperature gradient in the air mass. This type of flow is typically found in baroclinic atmospheres with cold air to the west.[6]

The image to the right shows such a situation in winter with CSI associated with negative equivalent potential vorticity (

η\le0

) near a warm front. Banded snowforms along the front, near the low pressure area and the CSI.

Slantwise convection

If a particle is climbing in a CSI zone, it will cool down and the water vapor will condense upon saturation, giving cloud and precipitation by oblique convection. For example, in front of a warm front, the air mass is stable because the mild air overcomes a cold mass. The geostrophic equilibrium brings back any particle moving perpendicularly from the center of the depression towards it. However, an upwardly oblique displacement by synoptic scale upward acceleration in a CSI layer produces parallel bands of heavy rainfall.[6] [7]

Conditional symmetric instability affects a layer that can be thin or very large in the vertical, similar to hydrostatic convection. The thickness of the layer determines the enhancement of convective precipitation within a region otherwise stratiform clouds.[6] As the motion is in an area near saturation, the particle remains very close to the moist adiabatic lapse rate which gives it a limited Convective available potential energy (CAPE). The rate of climb in a slantwise convection zone ranges from a few tens of centimeters per second to a few meters per second.[6] This is usually below the climbing speed limit in a cumulonimbus, i.e. 5 m/s, which gives lightning and limit the occurrence of it with CSI.[6] It is however possible in:[6]

Slantwise convection bands have several characteristics:[6]

  1. They are parallel
  2. They are parallel to the thermal wind
  3. They move with the general circulation
  4. The space between the bands is proportional to the thickness of the CSI layer

Subsidence

Conversely, if the particle slide downward, it will warm up and become relatively less saturated, dissipating clouds. The snow produced at higher altitude by the slantwise convection will also sublimate in the descending flow and accelerate. It can give it a speed of descent reaching the 20 m/s.[6] This effect is associated with the descent to the ground of the Sting jet.[8]

External links

Notes and References

  1. Web site: Slantwise convection . . Meteorology Glossary . August 23, 2019.
  2. Web site: Symmetric instability . . Meteorology Glossary . August 23, 2019.
  3. Web site: CSI Physical Discussion . https://web.archive.org/web/20150227203926/http://www.cimms.ou.edu/~doswell/csidisc/CSI.html. February 27, 2015. www.cimms.ou.edu . Charles A. Doswell III . . August 23, 2019. Charles A. Doswell III.
  4. Web site: French . Instabilité barocline . . August 23, 2019 . Glossaire météorologique .
  5. Web site: en . ppt . Mesoscale Processes . James T. Moore . . August 23, 2019 . 2001 . 10–53 . https://web.archive.org/web/20141221040317/http://www.comet.ucar.edu/class/rfc_hydromet/03-1/docs/Moore/Mesoinstab/Meso-proc.ppt . December 21, 2014 . dead .
  6. en . The Use and Misuse of Conditional Symmetric Instability . David M. . Schultz . Philip N. . Schumacher . . 127 . 12 . 2709 . December 1999 . 10.1175/1520-0493(1999)127<2709:TUAMOC>2.0.CO;2. . 708227 . 1520-0493. free .
  7. Web site: en . Vertical Motion Forcing Mechanisms Responsible for the Production of a Mesoscale very heavy snow band across Northern Kentucky . . Theodore W. Funk . James T. Moore.
  8. Web site: en . ppt . Sting Jets . Geraint Vaughan . eumetrain.org . December 18, 2014.