In the mathematics of evolving systems, the concept of a center manifold was originally developed to determine stability of degenerate equilibria. Subsequently, the concept of center manifolds was realised to be fundamental to mathematical modelling.
Center manifolds play an important role in bifurcation theory because interesting behavior takes place on the center manifold and in multiscale mathematics because the long time dynamics of the micro-scale often are attracted to a relatively simple center manifold involving the coarse scale variables.
Saturn's rings capture much center-manifold geometry. Dust particles in the rings are subject to tidal forces, which act characteristically to "compress and stretch". The forces compress particle orbits into the rings, stretch particles along the rings, and ignore small shifts in ring radius. The compressing direction defines the stable manifold, the stretching direction defining the unstable manifold, and the neutral direction is the center manifold.
While geometrically accurate, one major difference distinguishes Saturn's rings from a physical center manifold. Like most dynamical systems, particles in the rings are governed by second-order laws. Understanding trajectories requires modeling position and a velocity/momentum variable, to give a tangent manifold structure called phase space. Physically speaking, the stable, unstable and neutral manifolds of Saturn's ring system do not divide up the coordinate space for a particle's position; they analogously divide up phase space instead.
The center manifold typically behaves as an extended collection of saddle points. Some position-velocity pairs are driven towards the center manifold, while others are flung away from it. Small perturbations that generally push them about randomly, and often push them out of the center manifold. There are, however, dramatic counterexamples to instability at the center manifold, called Lagrangian coherent structures. The entire unforced rigid body dynamics of a ball is a center manifold.[1]
A much more sophisticated example is the Anosov flow on tangent bundles of Riemann surfaces. In that case, the tangent space splits very explicitly and precisely into three parts: the unstable and stable bundles, with the neutral manifold wedged between.
The center manifold of a dynamical system is based upon an equilibrium point of that system. A center manifold of the equilibrium then consists of those nearby orbits that neither decay nor grow exponentially quickly.
Mathematically, the first step when studying equilibrium points of dynamical systems is to linearize the system, and then compute its eigenvalues and eigenvectors. The eigenvectors (and generalized eigenvectors if they occur) corresponding to eigenvalues with negative real part form a basis for the stable eigenspace. The (generalized) eigenvectors corresponding to eigenvalues with positive real part form the unstable eigenspace.
Algebraically, let be a dynamical system, linearized about equilibrium point . The Jacobian matrix defines three main subspaces:
λ
\operatorname{Re}λ=0
|\operatorname{Re}λ|\leq\alpha
λ
\operatorname{Re}λ<0
\operatorname{Re}λ\leq-\beta<-r\alpha
λ
\operatorname{Re}λ>0
\operatorname{Re}λ\geq\beta>r\alpha
If the equilibrium point is hyperbolic (that is, all eigenvalues of the linearization have nonzero real part), then the Hartman-Grobman theorem guarantees that these eigenvalues and eigenvectors completely characterise the system's dynamics near the equilibrium. However, if the equilibrium has eigenvalues whose real part is zero, then the corresponding (generalized) eigenvectors form the center eigenspace. Going beyond the linearization, when we account for perturbations by nonlinearity or forcing in the dynamical system, the center eigenspace deforms to the nearby center manifold.[3]
If the eigenvalues are precisely zero (as they are for the ball), rather than just real-part being zero, then the corresponding eigenspace more specifically gives rise to a slow manifold. The behavior on the center (slow) manifold is generally not determined by the linearization and thus may be difficult to construct.
Analogously, nonlinearity or forcing in the system perturbs the stable and unstable eigenspaces to a nearby stable manifold and nearby unstable manifold.[4] These three types of manifolds are three cases of an invariant manifold.
Corresponding to the linearized system, the nonlinear system has invariant manifolds, each consisting of sets of orbits of the nonlinear system.[5]
The center manifold existence theorem states that if the right-hand side function
bf{f}(bf{x})
Cr
r
Cr
Cr
Cr-1
In example applications, a nonlinear coordinate transform to a normal form can clearly separate these three manifolds.[7]
In the case when the unstable manifold does not exist, center manifolds are often relevant to modelling. The center manifold emergence theorem then says that the neighborhood may be chosen so that all solutions of the system staying in the neighborhood tend exponentially quickly to some solution
bf{y}(t)
A third theorem, the approximation theorem, asserts that if an approximate expression for such invariant manifolds, say
bf{x}=bf{X}(bf{s})
l{O}(|bf{s}|p)
bf{s}\tobf{0}
bf{x}=bf{X}(bf{s})
l{O}(|bf{s}|p)
However, some applications, such as to dispersion in tubes or channels, require an infinite-dimensional center manifold.[9] The most general and powerful theory was developed by Aulbach and Wanner.[10] [11] [12] They addressed non-autonomous dynamical systems
dbf{x | |
|\operatorname{Re}λ|\leq\alpha
\operatorname{Re}λ\leq-\beta<-r\alpha
\operatorname{Re}λ\geq\beta>r\alpha
Potzsche and Rasmussen established a corresponding approximation theorem for such infinite dimensional, non-autonomous systems.[13]
All the extant theory mentioned above seeks to establish invariant manifold properties of a specific given problem. In particular, one constructs a manifold that approximates an invariant manifold of the given system. An alternative approach is to construct exact invariant manifolds for a system that approximates the given system---called a backwards theory. The aim is to usefully apply theory to a wider range of systems, and to estimate errors and sizes of domain of validity. [14] [15]
This approach is cognate to the well-established backward error analysis in numerical modeling.
As the stability of the equilibrium correlates with the "stability" of its manifolds, the existence of a center manifold brings up the question about the dynamics on the center manifold. This is analyzed by the center manifold reduction, which, in combination with some system parameter μ, leads to the concepts of bifurcations.
The Wikipedia entry on slow manifolds gives more examples.
Consider the system
x=x |
2,
y=y. |
y=Ae-1/x
y=Ae-1/x
Another example shows how a center manifold models the Hopf bifurcation that occurs for parameter
a ≈ 4
{dx}/{dt}=-ax(t-1)-2x2-x3
Fortunately, we may approximate such delays by the following trick that keeps the dimensionality finite.Define
u1(t)=x(t)
x(t-1) ≈ u3(t)
{du2}/{dt}=2(u1-u2)
{du3}/{dt}=2(u2-u3)
For parameter nearcritical,
a=4+\alpha
dbf{u | |
s(t)
\bars(t)
bf{u}=\left[\begin{array}{c}ei2ts+e-i2t\bars\\
1-i | |
2e |
i2ts+
1+i | |
2e |
-i2t\bars\\ -
i | |
2e |
i2ts+
i | |
2e |
-i2t\bars\end{array}\right] +{O}(\alpha+|s|2)
ds | |
dt |
=\left[
1+2i | |
10 |
\alphas -
3+16i | |
15 |
|s|2s\right]+{O}(\alpha2+|s|4)
\alpha>0 (a>4)