Broadcloth should not be confused with Broadwoven cloth.
Broadcloth is a dense, plain woven cloth, historically made of wool. The defining characteristic of broadcloth is not its finished width but the fact that it was woven much wider (typically 50 to 75% wider than its finished width) and then heavily milled (traditionally the cloth was worked by heavy wooden trip hammers in hot soapy water) in order to shrink it to the required width. The effect of the milling process is to draw the yarns much closer together than could be achieved in the loom and allow the individual fibres of the wool to bind together in a felting process, which results in a dense, blind face cloth with a stiff drape which is highly weather-resistant, hard wearing and capable of taking a cut edge without the need for being hemmed.
The manufacturing process originates from Flanders, the type of cloth was also made in Leiden and several parts of England at the end of the medieval period.[1] The raw material was short staple wool, carded and spun into yarn and then woven on a broad loom to produce cloth 1.75 yards wide. It was then fulled, usually in a fulling mill. When fulled, the fibres of the cloth would felt together, resulting in a smooth surface.
See also: Narrow cloth. The word "broadcloth" was originally used just as an antonym to "narrow cloth", but later came to mean a particular type of cloth.[2] The 1909 Webster's dictionary (as reprinted in 1913) defines broadcloth as "A fine smooth-faced woolen cloth for men's garments, usually of double width (i.e., a yard and a half [{{convert|1.5|yd|cm|disp=out}}]); — so called in distinction from woolens three quarters of a yard wide. [{{convert|0.75|yd|cm|disp=out}}]",[3] thus giving both the old breadth-based distinction and the newer definition based on the type of cloth.
Since the early 1920s, the American market has used the term "broadcloth" to describe a plain-woven, usually mercerised fabric woven with a rib and a slightly heavier filling yarn, used for shirt-making, made from cotton or a polyester-and-cotton blend. This fabric was introduced in the early 1920s as an import from the United Kingdom, where it was called poplin, but it was arbitrarily renamed "broadcloth" as it was thought that "poplin" had connotations of heaviness. Another version of this fabric, woven in rayon or polyester-and-rayon, is called fuji.[4]
The Harmonized Tariff Schedule of the United States uses the unambiguous terms "broadwoven" and "narrow woven", with a breadth cutoff of 30 centimeters (about 12 inches). By this definition, the US government estimates that 70-75% of all cloth production globally, by weight, is broadwoven.[5]
Broadcloth (Flemish Laken) was produced in the Duchy of Brabant (now Flanders) from the 11th century and throughout the medieval period.
After 1400 Leiden in Holland (now The Netherlands) became the most important place for broadcloth industry in Europe. There for the first time the production became industrialised. This means that the production process didn't take place entirely in one single factory anymore but according to a precise task allocation, where in several stages intermediate goods were produced. The entire process was strictly supervised, resulting in a constantly high quality, making Leiden broadcloth very popular. In 1417 the Hanseatic League decided that only approved broadcloth from Leiden was to be sold. From 1500 competition from other parts of Europe, especially England, grew and Leiden lost its leading role. In Italy Florence became an important center of broadcloth industry.
Around 1500, broadcloth was made in a number of districts of England, including Essex and Suffolk in southern East Anglia, the West Country Clothing District (Gloucestershire, Wiltshire, east Somerset - sometimes with adjacent areas), at Worcester, Coventry, Cranbrook in Kent and some other places.
This was the best English cloth, and large quantities were exported by the merchants of the Company of Merchant Adventurers of London, principally to Antwerp as white (i.e. undyed) cloth. It was finished and dyed in Flanders, and then marketed throughout northern Europe. The cloths might be short (24 yards long) or long (30 yards long).
The raw material for broadcloth from Worcester was wool from the Welsh border counties of Herefordshire and Shropshire, known as Lemster (i.e. Leominster) wool. That for the West Country came from the Cotswolds. In both cases, the high quality was the result of the comparatively poor pasture, which (probably aided by selective breeding) led the sheep to grow wool with the desired qualities.
English exports of broadcloth reached their highest level in the mid 16th century, after which some regions began producing other kinds of cloth. Difficulties were encountered in export markets in the mid-1610s, partly due to currency difficulties in eastern Europe, and partly to the ill-conceived Cockayne Project. Broadcloth production, thus declined in the 17th century.
Worcester remained a centre for the production of white broadcloth. Other areas, such as Ludlow and parts of the Cotswolds started to produce similar cloth, known as 'Worcesters'. The market suffered major setback in the 18th century, when the trade of the Levant Company with Turkey was obstructed by French competition. From this time, the production of broadcloth lost its importance.[6]
Wool broadcloth with its felted, velvet-like feel, has been used to upholster furniture and car interiors.[17]