A beehive is an enclosed structure in which some honey bee species of the subgenus Apis live and raise their young. Though the word beehive is used to describe the nest of any bee colony, scientific and professional literature distinguishes nest from hive. Nest is used to discuss colonies that house themselves in natural or artificial cavities or are hanging and exposed. The term hive is used to describe an artificial/man-made structure to house a honey bee nest. Several species of Apis live in colonies. But for honey production, the western honey bee (Apis mellifera) and the eastern honey bee (Apis cerana) are the main species kept in hives.[1] [2]
The nest's internal structure is a densely packed group of hexagonal prismatic cells made of beeswax, called a honeycomb. The bees use the cells to store food (honey and pollen) and to house the brood (eggs, larvae, and pupae).
Beehives serve several purposes. These include the production of honey, pollination of nearby crops, housing supply bees for apitherapy treatment, and trying to mitigate the effects of colony collapse disorder. In America, hives are commonly transported so bees can pollinate crops elsewhere.[3] Several patents have been issued for beehive designs.
Honey bees use caves, rock cavities, and hollow trees as natural nesting sites. In warmer climates, they may build exposed hanging nests; members of other subgenera have exposed aerial combs. Multiple parallel honeycombs form the hive with a relatively uniform bee space. It usually has a single entrance. Western honey bees prefer nest cavities approximately in volume and avoid those smaller than or larger than .[4] Western honey bees show several nest-site preferences: the height above ground is usually between 1m (03feet) and 5m (16feet), entrance positions tend to face downward, equatorial-facing entrances are favored, and nest sites over 300m (1,000feet) from the parent colony are preferred.[5] Most bees occupy nests for several years.
The bees often smooth the bark surrounding the nest entrance and coat the cavity walls with a thin layer of hardened plant resin called propolis. Honeycombs are attached to the walls along the cavity tops and sides, but the bees leave passageways along the comb edges.[6] The standard nest architecture for all honeybees is similar: honey is stored in the upper part of the comb; beneath it are rows of pollen-storage cells, worker-brood cells, and drone-brood cells, in that order. The peanut-shaped queen cells are normally built at the lower edge of the comb.[4]
In antiquity, Egyptians kept bees in human-made hives.[7] The walls of the Egyptian sun temple of Nyuserre Ini from the 5th Dynasty, dated earlier than 2422 BCE, depict workers blowing smoke into hives as they remove honeycombs.[8] Inscriptions detailing honey production are found on the tomb of Pabasa from the 26th Dynasty, and describe honey stored in jars and cylindrical hives.[9]
The archaeologist Amihai Mazar cites 30 intact hives that were discovered in the ruins of Rehov (2,000 residents in 900 BCE, Israelites and Canaanites). This is evidence that an advanced honey industry existed in Israel approximately 4,000 years ago. The 150 beehives, many broken, were made of straw and unbaked clay. They were found in orderly rows. Ezra Marcus from the University of Haifa said the discovery provided a glimpse of ancient beekeeping seen in texts and ancient art from the Near East. An altar decorated with fertility figurines was found alongside the hives and may indicate religious practices associated with beekeeping. While beekeeping predates these ruins, this is the oldest apiary yet discovered.[10]
Traditional beehives provided an enclosure for the bee colony. Because no internal structures were provided for the bees, they created their honeycomb within the hives. The comb is often cross-attached and cannot be moved without destroying it. This is sometimes called a fixed-frame hive to differentiate it from the modern movable-frame hives. Harvest often destroyed the hives, though some adaptations were using top baskets which could be removed when the bees filled them with honey. These were gradually supplanted with box hives of varying dimensions, with or without frames, and finally replaced by newer modern equipment.
Honey from traditional hives was extracted by pressing – crushing the wax honeycomb to squeeze out the contents. Due to this harvesting, traditional beehives provided more beeswax, but far less honey than a modern hive.
Four styles of traditional beehives are mud hives, clay/tile hives, skeps, and bee gums.
Mud hives are still used in Egypt and Siberia. These are long cylinders made from a mixture of unbaked mud, straw, and dung.[11]
Clay tiles were the customary homes of kept bees in the eastern end of the Mediterranean. Long cylinders of baked clay were used in ancient Egypt, the Middle East, and to some extent in Greece, Italy, and Malta. They sometimes were used singly, but more often stacked in rows to provide some shade, at least for those not on top. Keepers would smoke one end to drive the bees to the other end while they harvested honey.
Skeps, baskets placed open-end-down, have been used to house bees for some 2000 years. Believed to have been first used in Ireland, they were initially made from wicker plastered with mud and dung but after the Middle Ages, almost all were made of straw. In northern and western Europe, skeps were made of coils of grass or straw. In its simplest form, there is a single entrance at the bottom of the skep. Again, there is no internal structure provided for the bees and the colony must produce its honeycomb, which is attached to the inside of the skep. The size of early modern skeps was about two pecks to a bushel (18 to 36 liters).[12]
Skeps have two disadvantages: beekeepers cannot inspect the comb for diseases and pests, and honey removal is difficult and often results in the destruction of the entire colony. To get the honey beekeepers either drove the bees out of the skep or, by using a bottom extension called an eke or a top extension called a cap, sought to create a comb with only honey in it. Quite often the bees were killed, sometimes using lighted sulfur, to allow the honeycomb to be removed. Skeps could also be squeezed in a vise to extract the honey.
As of 1998, most US states prohibited the use of skeps, or any other hive that cannot be inspected for disease and parasites.[13]
Later skep designs included a smaller woven basket (cap) on top over a small hole in the main skep. This cap acted as a crude super, allowing some honey to be extracted with less destruction of brood and bees. In England, such an extension piece consisting of a ring of about 4 or 5 coils of straw placed below a straw beehive to give extra room for brood rearing was called an eke, imp, or nadir. An eke was used to give just a bit of extra room, or to "eke" some more space, a nadir is a larger extension used when a full story was needed beneath.[14]
The term is derived from Old Norse skeppa, "basket".[15] A person who made such woven beehives was called a "skepper", a surname that still exists in Western countries. In England the thickness of the coil of straw was controlled using a ring of leather or a piece of cow's horn called a "girth" and the coils of straw could be sewn together using strips of briar. Likenesses of skeps can be found in paintings, carvings, and old manuscripts. The skep is often used on signs as an indication of industry ("the busy bee").
In the late 18th century, more complex skeps appeared with wooden tops with holes in them over which glass jars were placed. The comb would then be built into the glass jars, making the designs commercially attractive.
In the eastern United States, especially in the Southeast, sections of hollow trees were used until the 20th century. These were called "gums" because they often were from black gum (Nyssa sylvatica) trees.[16]
Sections of the hollow trees were set upright in "bee yards" or apiaries. Sometimes sticks or crossed sticks were placed under a board cover to give an attachment for the honeycomb. As with skeps, the harvest of honey from these destroyed the colony. Often the harvester would kill the bees before even opening their nest. This was done by inserting a metal container of burning sulfur into the gum.[17]
Natural tree hollows and artificially hollowed tree trunks were widely used in the past by beekeepers in Central Europe. For example, in Poland, such a beehive was called a barć and was protected in various ways from unfavorable weather conditions (rain, frost) and predators (woodpeckers, bears, pine martens, forest dormice). Harvest of honey from these did not destroy the colony, as only a protective piece of wood was removed from the opening and smoke was used to pacify the bees for a short time.[18] [17] Spain still uses cork bark cylinder with cork top hives, similar to a gum or barc, colmenas de corcho.
Part of the reason why bee gums are still used is that this allows the producers of the honey to distinguish themselves from other honey producers and to ask for a higher price for the honey. An example where bee gums are still used is Mont-Lozère, France, although in Europe they are referred to as log hives.[19] [20] [21] [22] The length of these log hives used is shorter than bee gums; they are hollowed out artificially and cut to a specific size.
The earliest recognizably modern designs of beehives arose in the 19th century, though they were perfected from intermediate stages of progress made in the 18th century.
Intermediate stages in hive design were recorded for example by Thomas Wildman in 1768-1770, who described advances over the destructive old skep-based beekeeping so that the bees no longer had to be killed to harvest the honey.[23] Wildman, for example, fixed a parallel array of wooden bars across the top of a straw hive or skep (with a separate straw top to be fixed on later) "so that there are in all seven bars of deal" [in a {{convert|10|in|mm|adj=mid|-diameter}} hive] "to which the bees fix their combs".[24] He also described using such hives in a multi-story configuration, foreshadowing the modern use of supers: he described adding (at the proper time) successive straw hives below, and eventually removing the ones above when free of brood and filled with honey so that the bees could be separately preserved at the harvest for the following season. Wildman also described[25] a further development, using hives with "sliding frames" for the bees to build their comb, foreshadowing more modern uses of movable-comb hives. Wildman acknowledged the advances in knowledge of bees previously made by Swammerdam, Maraldi, and de Reaumur – he included a lengthy translation of Reaumur's account of the natural history of bees – and he also described the initiatives of others in designing hives for the preservation of bee-life when taking the harvest, citing in particular reports from Brittany dating from the 1750s, due to Comte de la Bourdonnaye.
In 1814 Petro Prokopovych, the founder of commercial beekeeping in Ukraine, invented one of the first beehive frames which allowed an easier honey harvest.[26] [27]
The correct distance between combs for easy operations in beehives was described in 1845 by Jan Dzierżon as from the center of one top bar to the center of the next one. In 1848, Dzierżon introduced grooves into the hive's side walls replacing the strips of wood for moving top bars. The grooves were 8mm8mm, the spacing later termed bee space.Based on the aforementioned measurements, August Adolph von Berlepsch (Bienezeitung May 1852) in Thuringia and L.L. Langstroth (October 1852) in the United States designed their own movable-frame hives. Langstroth used, however "about 1/2 inch" above the frame's top bars and "about 3/8 inch" between the frames and hive body.[28]
See main article: Langstroth hive.
Langstroth hives are named for Rev. Lorenzo Langstroth, who patented his design in the United States on October 5, 1852.[30]
Inside the boxes, frames are hung parallel to each other. Langstroth frames are thin rectangular structures made of wood or plastic and typically have a plastic or wax foundation on which the bees draw out the comb. The frames hold the honeycomb formed by the bees with beeswax. Eight or ten frames side by side (depending on the size of the box) will fill the hive body and leave the right amount of bee space between each frame and between the end frames and the hive body. With appropriate provision of bee space, the bees are not likely to glue parts together with propolis nor fill spaces with burr combalthough the dimensions now usual for top bee space are not the same as those that Langstroth described. Self-spacing beehive frames were introduced by Julius Hoffman, a student of Johann Dzierzon.[32] Langstroth frames can be reinforced with wire, making it possible to spin the honey out of the comb in a centrifuge. As a result, the empty frames and comb can be returned to the beehive for re-filling by the bees. Creating a honeycomb involves a significant energy investment, conservatively estimated at of honey needed to create of comb in temperate climates.[33] Reusing comb can thus increase the productivity of a beekeeping enterprise.[34]
The sizes of hive bodies (rectangular boxes without tops or bottoms placed one on top of another) and of internal frames vary between named styles. A variety of approximations to Langstroth's original box and frame sizes are still used, with top bars some long[35] or a little more.[36] However, this class of hives includes several other styles, mostly used in Europe, which differ mainly in the size and number of frames used. These include:
The Warré hive was invented by the village priest Émile Warré, and is also called French: ruche populaire ('the people's hive'. It is a modular and storied design similar to a Langstroth hive. The hive body is made of boxes stacked vertically; however, it uses top bars for comb support instead of full frames similar to a Top-Bar Hive, as a general rule. The popularity of this hive is growing among 'sustainable-practice' beekeepers.[38]
The Warre hive differs from other stacked hive systems in one fundamental aspect: when the bees need more space as the colony expands, the new box is "nadired"; i.e., positioned underneath the existing box or boxes. This serves the purpose of warmth retention within the brood nest of the hive, considered vital to colony health.[38]
The WBC, invented by and named after William Broughton Carr in 1890, is a double-walled hive with an external housing that splays out towards the bottom of each frame covering a standard box shape hive inside. The WBC is in many respects the 'classic' hive as represented in pictures and paintings, but despite the extra level of insulation for the bees offered by its double-walled design, many beekeepers avoid it, owing to the inconvenience of having to remove the external layer before the hive can be examined.
In 1890, Charles Nash Abbott (1830–1894), advisor to Ireland's Department of Agriculture and Technical Instruction, designed a new Congested Districts Board (CDB) hive in Dublin, Ireland. It was commissioned by and named after the Congested Districts Board for Ireland which provided support for rural populations until its absorption into the Department of Agriculture.[39]
One of the most famous Slovenian beekeepers was Anton Žnideršič (1874–1947). He developed the AZ hive house and hive box widely used today in Slovenia.
These are single, long, boxes, with the bars hanging in parallel. The hive body of a common style of horizontal hive is often shaped like an inverted trapezoid, but it may be rectangular in cross-section and able to accept normal frames. They have movable combs and make use of the concept of bee space.[40] They were developed as a lower-cost alternative to the standard Langstroth hives and equipment. They do not require the beekeeper to lift heavy supers when the hive is inspected or manipulated. They are popular in the US due to their alignment with the organic, treatment-free philosophies of many new beekeeping devotees in the United States. The initial costs and equipment requirements are typically much less than other hive designs. Scrap wood can often be used to build a good hive. Horizontal hives do not require the beekeeper to lift super boxes; all checks and manipulation can be done while lifting only one comb at a time and with minimal bending. In areas where large terrestrial animals such as honey badgers and bears present a threat to beehives, single-box hives may be suspended out of reach. Elsewhere, they are commonly raised to a level that allows the beekeeper to inspect and manipulate them in comfort.
Disadvantages include (usually) unsupported combs that cannot be spun in most honey extractors, and it is not usually possible to expand the hive if additional honey storage space is required. Most horizontal hives cannot easily be lifted and carried by one person.
See main article: Top-bar hive.
Horizontal hives often use top-bars instead of frames. Top bars are simple lengths of timber often made by cutting scrap wood to size; it is not necessary to buy or assemble frames. The top bars form a continuous roof over the hive chamber, unlike conventional frames which offer a bee-space gap so that the bees can move up and down between hive boxes. The beekeeper does not usually provide foundation wax (or provides only a small starter piece of foundation) for the bees to build from. The bees build the comb so it hangs down from the top bar. This is in keeping with the way bees build wax in a natural cavity.[41]
Because the unsupported comb built from a top bar cannot usually be centrifuged in a honey extractor, the honey is usually extracted by crushing and straining rather than centrifuging. Because the bees have to rebuild their comb after the honey is harvested, a top-bar hive yields a beeswax harvest in addition to honey. Queen excluders may or may not be used to keep the brood areas entirely separate from the honey. Even if no queen excluder is used, the bees store most of their honey separately from the areas where they are raising the brood, and honey can still be harvested without killing the bees or brood.[42]
The long box hive is a single-story hive that accepts enclosed frames and is worked horizontally in the manner of Kenya/Tanzanian top-bar hives. This non-stacked style had higher popularity a century ago in the Southeast United States but faded from use due to a lack of portability. With the recent popularity of horizontal top-bar hives, the long box hive is gaining renewed but limited utilization. Alternative names are "new idea hive", "single story hive", "Poppleton hive", or "long hive".[43]
Variations:
See also: Bee (mythology).
The beehive is a commonly used symbol in various human cultures. In Europe, it was used by the Romans as well as in heraldry. Most heraldic representation of beehives is in the form of a skep. Bees (and beehives) have some symbols often associated with them though it is not universal:[50]
In modern times, it is a key symbol in Freemasonry. In masonic lectures, it represents industry and cooperation,[51] and as a metaphor cautioning against intellectual laziness, warning that "he that will so demean himself as not to be endeavoring to add to the common stock of knowledge and understanding, may be deemed a drone in the hive of nature, a useless member of society, and unworthy of our protection as Masons."[52]
The beehive appears on the 3rd Degree emblems on the Tracing Board of Royal Cumberland No. 41, Bath and is explained as such:[53]
The beehive is also used with a similar meaning by the Church of Jesus Christ of Latter-day Saints, informally known as Mormons. From Latter-day Saint usage, it has become one of the State symbols of Utah (see Deseret).[54]
See main article: Bee removal. Beekeepers and companies may remove unwanted honey bee nests from structures to relocate them into an artificial hive. This process is called a "cut out".
Black bears destroy hives in their quest for honey and protein-rich larvae.[55] Grizzly bears will also eat beehives and are harder to dissuade from taking several beehives.[56] Hives can be protected with an electrified enclosure and livestock fence "shocker" base. Systems available are grid plugged(120v) or solar (dc) for remote spots (more info).
Hives erected as a crop shield against elephants are sometimes destroyed elephants. These hives are hung on a single metal wire that encircles the crop field of some farms in African elephant territory. The installation is called a beehive fence and was conceived by Lucy King.[57] [58]
Humans have historically destroyed nests and hives of honey-producing bee species to obtain honey and beeswax and other bee products. Modern honey frame and centerfuge systems, such as Langstroth, are less harmful to the hive, assuming harvest will happen, and increase production at the same time.
Humans may also determine that a beehive must be destroyed in the interest of public safety or in the interest of preventing the spread of bee diseases. The U.S. state of Florida destroyed the hives of Africanized honey bees, in 1999.[59] The state of Alaska has issued regulations governing the treatment of diseased beehives via burning followed by burial, fumigation using ethylene oxide or other approved gases, sterilization by treatment with lye, or by scorching.[60] In New Zealand and the United Kingdom, the treatment of hives infected with the disease American foulbrood with antibiotics is prohibited, and beekeepers are required by law to destroy such colonies and hives with fire.[61] [62]
Most hives have been optimized for Apis mellifera and Apis cerana. Some other hives have been designed and optimized for some meliponines such as Melipona beecheii. Examples of such hives are the Nogueira-Neto hive and the UTOB hive.[28]