Aluminium oxynitride (marketed under the name ALON by Surmet Corporation[1]) is a transparent ceramic composed of aluminium, oxygen and nitrogen. Aluminium oxynitride is optically transparent (≥ 80%) in the near-ultraviolet, visible, and mid-wave-infrared regions of the electromagnetic spectrum. It is four times as hard as fused silica glass, 85% as hard as sapphire, and nearly 115% as hard as magnesium aluminate spinel. It can be fabricated into transparent windows, plates, domes, rods, tubes, and other forms using conventional ceramic powder processing techniques.
Aluminium oxynitride is the hardest polycrystalline transparent ceramic available commercially.[2] Because of its relatively low weight, distinctive optical and mechanical properties, and resistance to oxidation or radiation, it shows promise for applications such as bulletproof, blast-resistant, and optoelectronic windows.[3] Aluminium oxynitride-based armor has been shown to stop multiple armor-piercing projectiles of up to .50 BMG.[4]
Aluminium oxynitride is resistant to various acids, bases, and water.[5]
Aluminium oxynitride has the following mechanical properties:[2]
Aluminium oxynitride has the following thermal and optical properties:
Aluminium oxynitride is used for infrared-optical windows, with greater than 80% transparency at wavelengths below about 4 micrometers, dropping to near zero at about 6 micrometers.[6] It has also been demonstrated as an interface passivation layer in some semiconductor-related applications.[7]
Aluminium oxynitride has less than half the weight and thickness of glass-based transparent armor.[8] Aluminium oxynitride armor of 1.6inches thickness is capable of stopping .50 BMG armor-piercing rounds, which can penetrate 3.7inches of traditional glass laminate.[9]
In 2005, the United States Air Force began testing aluminium oxynitride-based armor.[10]
Aluminium oxynitride can be fabricated as windows, plates, domes, rods, tubes and other forms using conventional ceramic powder processing techniques. Its composition can vary slightly: the aluminium content from about 30% to 36%, which has been reported to affect the bulk and shear moduli by only 1–2%.[11] The fabricated greenware is subjected to heat treatment (densification) at elevated temperatures followed by grinding and polishing to transparency. It can withstand temperatures of about 2100C in inert atmospheres. The grinding and polishing substantially improves the impact resistance and other mechanical properties of armor.[12]
Patents related to aluminium oxynitride include: