Young's modulus explained

Young's modulus (or Young modulus) is a mechanical property of solid materials that measures the tensile or compressive stiffness when the force is applied lengthwise. It is the modulus of elasticity for tension or axial compression. Young's modulus is defined as the ratio of the stress (force per unit area) applied to the object and the resulting axial strain (displacement or deformation) in the linear elastic region of the material.

Although Young's modulus is named after the 19th-century British scientist Thomas Young, the concept was developed in 1727 by Leonhard Euler. The first experiments that used the concept of Young's modulus in its modern form were performed by the Italian scientist Giordano Riccati in 1782, pre-dating Young's work by 25 years.^[1] The term modulus is derived from the Latin root term modus, which means measure.

Definition

Young's modulus,

E , quantifies the relationship between tensile or compressive stress \sigma (force per unit area) and axial strain \varepsilon (proportional deformation) in the linear elastic region of a material:^[2] $$E\; =\; \backslash frac$$

Young's modulus is commonly measured in the International System of Units (SI) in multiples of the pascal (Pa) and common values are in the range of gigapascals (GPa).

Examples:

• Rubber (increasing pressure: length increases quickly, meaning low

E )

• Aluminium (increasing pressure: length increases slowly, meaning high

E )

Linear elasticity

See main article: Linear elasticity. A solid material undergoes elastic deformation when a small load is applied to it in compression or extension. Elastic deformation is reversible, meaning that the material returns to its original shape after the load is removed.

At near-zero stress and strain, the stress–strain curve is linear, and the relationship between stress and strain is described by Hooke's law that states stress is proportional to strain. The coefficient of proportionality is Young's modulus. The higher the modulus, the more stress is needed to create the same amount of strain; an idealized rigid body would have an infinite Young's modulus. Conversely, a very soft material (such as a fluid) would deform without force, and would have zero Young's modulus.

Related but distinct properties

Material stiffness is a distinct property from the following:

• Strength: maximum amount of stress that material can withstand while staying in the elastic (reversible) deformation regime;
• Geometric stiffness: a global characteristic of the body that depends on its shape, and not only on the local properties of the material; for instance, an I-beam has a higher bending stiffness than a rod of the same material for a given mass per length;
• Hardness: relative resistance of the material's surface to penetration by a harder body;
• Toughness: amount of energy that a material can absorb before fracture.

Usage

Young's modulus enables the calculation of the change in the dimension of a bar made of an isotropic elastic material under tensile or compressive loads. For instance, it predicts how much a material sample extends under tension or shortens under compression. The Young's modulus directly applies to cases of uniaxial stress; that is, tensile or compressive stress in one direction and no stress in the other directions. Young's modulus is also used in order to predict the deflection that will occur in a statically determinate beam when a load is applied at a point in between the beam's supports.

G , bulk modulus K , and Poisson's ratio \nu . Any two of these parameters are sufficient to fully describe elasticity in an isotropic material. For example, calculating physical properties of cancerous skin tissue, has been measured and found to be a Poisson’s ratio of 0.43±0.12 and an average Young’s modulus of 52 KPa. Defining the elastic properties of skin may become the first step in turning elasticity into a clinical tool.^[3] For homogeneous isotropic materials simple relations exist between elastic constants that allow calculating them all as long as two are known:E = 2 G( 1+ \nu) = 3 K( 1-2 \nu).

Linear versus non-linear

Young's modulus represents the factor of proportionality in Hooke's law, which relates the stress and the strain. However, Hooke's law is only valid under the assumption of an elastic and linear response. Any real material will eventually fail and break when stretched over a very large distance or with a very large force; however, all solid materials exhibit nearly Hookean behavior for small enough strains or stresses. If the range over which Hooke's law is valid is large enough compared to the typical stress that one expects to apply to the material, the material is said to be linear. Otherwise (if the typical stress one would apply is outside the linear range), the material is said to be non-linear.

Steel, carbon fiber and glass among others are usually considered linear materials, while other materials such as rubber and soils are non-linear. However, this is not an absolute classification: if very small stresses or strains are applied to a non-linear material, the response will be linear, but if very high stress or strain is applied to a linear material, the linear theory will not be enough. For example, as the linear theory implies reversibility, it would be absurd to use the linear theory to describe the failure of a steel bridge under a high load; although steel is a linear material for most applications, it is not in such a case of catastrophic failure.

In solid mechanics, the slope of the stress–strain curve at any point is called the tangent modulus. It can be experimentally determined from the slope of a stress–strain curve created during tensile tests conducted on a sample of the material.

Directional materials

Young's modulus is not always the same in all orientations of a material. Most metals and ceramics, along with many other materials, are isotropic, and their mechanical properties are the same in all orientations. However, metals and ceramics can be treated with certain impurities, and metals can be mechanically worked to make their grain structures directional. These materials then become anisotropic, and Young's modulus will change depending on the direction of the force vector.^[4] Anisotropy can be seen in many composites as well. For example, carbon fiber has a much higher Young's modulus (is much stiffer) when force is loaded parallel to the fibers (along the grain). Other such materials include wood and reinforced concrete. Engineers can use this directional phenomenon to their advantage in creating structures.

Temperature dependence

The Young's modulus of metals varies with the temperature and can be realized through the change in the interatomic bonding of the atoms, and hence its change is found to be dependent on the change in the work function of the metal. Although classically, this change is predicted through fitting and without a clear underlying mechanism (for example, the Watchman's formula), the Rahemi-Li model^[5] demonstrates how the change in the electron work function leads to change in the Young's modulus of metals and predicts this variation with calculable parameters, using the generalization of the Lennard-Jones potential to solids. In general, as the temperature increases, the Young's modulus decreases via

E(T) = \beta(\varphi(T)) ^{6} where the electron work function varies with the temperature as \varphi(T) = \varphi _{0- \gamma ((k ^{2} _{BT)})/(\varphi _{0})} and \gamma is a calculable material property which is dependent on the crystal structure (for example, BCC, FCC). \varphi _{0} is the electron work function at T=0 and \beta is constant throughout the change.

Calculation

Young's modulus is calculated by dividing the tensile stress,

\sigma(\varepsilon) , by the engineering extensional strain, \varepsilon , in the elastic (initial, linear) portion of the physical stress–strain curve:

$$E\; \backslash equiv\; \backslash frac=\; \backslash frac\; =\; \backslash frac$$where

E is the Young's modulus (modulus of elasticity)F is the force exerted on an object under tension;A is the actual cross-sectional area, which equals the area of the cross-section perpendicular to the applied force;\Delta L is the amount by which the length of the object changes (\Delta L is positive if the material is stretched, and negative when the material is compressed);L _{0} is the original length of the object.

Force exerted by stretched or contracted material

Young's modulus of a material can be used to calculate the force it exerts under specific strain.

F = (E A \Delta L)/(L _{0}) where F is the force exerted by the material when contracted or stretched by \Delta L .

Hooke's law for a stretched wire can be derived from this formula:

F = \left( (E A)/(L _{0}) \right) \Delta L = k x where it comes in saturationk \equiv (E A)/(L _{0}) and x \equiv \Delta L. But note that the elasticity of coiled springs comes from shear modulus, not Young's modulus.

Elastic potential energy

The elastic potential energy stored in a linear elastic material is given by the integral of the Hooke's law:

U _{e} = \int {k x} dx = (1)/(2) k x ^{2.}

now by explicating the intensive variables:

U _{e} = \int (E A \Delta L)/(L _{0}) d\Delta L = (E A)/(L _{0}) \int \Delta L d\Delta L = (E A {\Delta L)/(^{2}}) { 2 L _{0}}

This means that the elastic potential energy density (that is, per unit volume) is given by:

(U _{e})/(A L _{0}) = (E {\Delta L)/(^{2}}) { 2 L ^{2 }} _{0} = (1)/(2) x (E {\Delta L)/() } \times \frac = \frac \times \sigma(\varepsilon) \times \varepsilon

or, in simple notation, for a linear elastic material: $u\_e(\backslash varepsilon)\; =\; \backslash int\; \backslash ,\; d\backslash varepsilon\; =\; \backslash frac\; E\; ^2$, since the strain is defined $\backslash varepsilon\; \backslash equiv\; \backslash frac$.

In a nonlinear elastic material the Young's modulus is a function of the strain, so the second equivalence no longer holds, and the elastic energy is not a quadratic function of the strain:

u _{e(\varepsilon)} = \int E(\varepsilon) \varepsilon d\varepsilon \ne (1)/(2) E \varepsilon ^{2}

Examples

Young's modulus can vary somewhat due to differences in sample composition and test method. The rate of deformation has the greatest impact on the data collected, especially in polymers. The values here are approximate and only meant for relative comparison.

Young's modulus (GPa)! data-sort-type="number"

Megapound per square inch (Mpsi)^[6]	Ref.
Aluminium (13Al)	68	9.86	^[7] ^[8] ^[9] ^[10] ^[11] ^[12]
Amino-acid molecular crystals	21–44	3.05–6.38	^[13]
Aramid (for example, Kevlar)	70.5–112.4	10.2–16.3	^[14]
Aromatic peptide-nanospheres	230–275	33.4–39.9	^[15]
Aromatic peptide-nanotubes	19–27	2.76–3.92	^[16] ^[17]
Bacteriophage capsids	1–3	0.145–0.435	^[18]
Beryllium (4Be)	287	41.6	^[19]
Bone, human cortical	14	2.03	^[20]
Brass	106	15.4	^[21]
Bronze	112	16.2	^[22]
Carbon nitride (CN2)	822	119	^[23]
Carbon-fiber-reinforced plastic (CFRP), 50/50 fibre/matrix, biaxial fabric	30–50	4.35–7.25	^[24]
Carbon-fiber-reinforced plastic (CFRP), 70/30 fibre/matrix, unidirectional, along fibre	181	26.3	^[25]
Cobalt-chrome (CoCr)	230	33.4	^[26]
Copper (Cu), annealed	110	16	^[27]
Diamond (C), synthetic	1050–1210	152–175	^[28]
Diatom frustules, largely silicic acid	0.35–2.77	0.051–0.058	^[29]
Flax fiber	58	8.41	^[30]
Float glass	47.7–83.6	6.92–12.1	^[31]
Glass-reinforced polyester (GRP)	17.2	2.49	^[32]
Gold	77.2	11.2	^[33]
Graphene	1050	152	^[34]
Hemp fiber	35	5.08	^[35]
High-density polyethylene (HDPE)	0.97–1.38	0.141–0.2	^[36]
High-strength concrete	30	4.35	^[37]
Lead (82Pb), chemical	13	1.89
Low-density polyethylene (LDPE), molded	0.228	0.0331	^[38]
Magnesium alloy	45.2	6.56	^[39]
Medium-density fiberboard (MDF)	4	0.58	^[40]
Molybdenum (Mo), annealed	330	47.9	^[41]
Monel	180	26.1
Mother-of-pearl (largely calcium carbonate)	70	10.2	^[42]
Nickel (28Ni), commercial	200	29
Nylon 66	2.93	0.425	^[43]
Osmium (76Os)	525–562	76.1–81.5	^[44]
Osmium nitride (OsN2)	194.99–396.44	28.3–57.5	^[45]
Polycarbonate (PC)	2.2	0.319	^[46]
Polyethylene terephthalate (PET), unreinforced	3.14	0.455	^[47]
Polypropylene (PP), molded	1.68	0.244	^[48]
Polystyrene, crystal	2.5–3.5	0.363–0.508	^[49]
Polystyrene, foam	0.0025–0.007	0.000363–0.00102	^[50]
Polytetrafluoroethylene (PTFE), molded	0.564	0.0818	^[51]
Rubber, small strain	0.01–0.1	0.00145–0.0145
Silicon, single crystal, different directions	130–185	18.9–26.8	^[52]
Silicon carbide (SiC)	90–137	13.1–19.9	^[53]
Single-walled carbon nanotube	data-sort-value="1000"	> 1000	data-sort-value="140"	> 140	^[54] ^[55]
Steel, A36	200	29	^[56]
Stinging nettle fiber	87	12.6
Titanium (22Ti)	116	16.8	^[57] ^[58]
Titanium alloy, Grade 5	114	16.5	^[59]
Tooth enamel, largely calcium phosphate	83	12	^[60]
Tungsten carbide (WC)	600–686	87–99.5	^[61]
Wood, American beech	9.5–11.9	1.38–1.73	^[62]
Wood, black cherry	9–10.3	1.31–1.49
Wood, red maple	9.6–11.3	1.39–1.64
Wrought iron	193	28	^[63]
Yttrium iron garnet (YIG), polycrystalline	193	28	^[64]
Yttrium iron garnet (YIG), single-crystal	200	29	^[65]
Zinc (30Zn)	108	15.7	^[66]
Zirconium (40Zr), commercial	95	13.8

See also

• Bending stiffness
• Deflection
• Deformation
• Flexural modulus
• Impulse excitation technique
• List of materials properties
• Yield (engineering)

Further reading

• ASTM E 111, "Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus"
• The ASM Handbook (various volumes) contains Young's Modulus for various materials and information on calculations. Online version

External links

• Matweb: free database of engineering properties for over 175,000 materials
• Young's Modulus for groups of materials, and their cost

Notes and References

1. The Rational mechanics of Flexible or Elastic Bodies, 1638–1788: Introduction to Leonhardi Euleri Opera Omnia, vol. X and XI, Seriei Secundae. Orell Fussli.
2. Book: Jastrzebski, D. . Nature and Properties of Engineering Materials . . 1959 . Wiley International.
3. Tilleman . Tamara Raveh . Tilleman . Michael M. . Neumann . Martino H.A. . December 2004 . The Elastic Properties of Cancerous Skin: Poisson's Ratio and Young's Modulus . Israel Medical Association Journal . 6 . 12 . 753–755.
4. Gorodtsov . V.A. . Lisovenko . D.S. . 2019 . Extreme values of Young's modulus and Poisson's ratio of hexagonal crystals. Mechanics of Materials . en . 134 . 1–8 . 10.1016/j.mechmat.2019.03.017 . 140493258 .
5. Rahemi . Reza . Li . Dongyang . April 2015 . Variation in electron work function with temperature and its effect on the Young's modulus of metals . . 99 . 2015 . 41–44 . 1503.08250 . 2015arXiv150308250R . 10.1016/j.scriptamat.2014.11.022 . 118420968.
6. Web site: Unit of Measure Converter. May 9, 2021. MatWeb.
7. Web site: Aluminum, Al. May 7, 2021. MatWeb.
8. Book: Weast, Robert C. . . . 1981 . 978-0-84-930740-9 . 62nd . Boca Raton, FL . 10.1002/jctb.280500215.
9. Book: Ross, Robert B.. Metallic Materials Specification Handbook. Chapman & Hall. 1992. 9780412369407. 4th. London. 10.1007/978-1-4615-3482-2.
10. Book: Nunes. Rafael. Volume 2: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials. Adams. J. H.. Ammons. Mitchell. Avery. Howard S.. Barnhurst. Robert J.. Bean. John C.. Beaudry. B. J.. Berry. David F.. Black. William T.. ASM International. 1990. 978-0-87170-378-1. 10th. ASM Handbook. 3.
11. Book: Nayar, Alok. The Metals Databook. McGraw-Hill. 1997. 978-0-07-462300-8. New York, NY.
12. Book: CRC Handbook of Chemistry and Physics. CRC Press. 1999. 978-0-84-930480-4. Lide. David R.. 80th. Boca Raton, FL. Commercial Metals and Alloys.
13. Azuri . Ido . Meirzadeh . Elena . Ehre . David . Cohen . Sidney R. . Rappe . Andrew M. . Lahav . Meir . Lubomirsky . Igor . Kronik . Leeor . 3 . November 9, 2015 . Unusually Large Young's Moduli of Amino Acid Molecular Crystals . . International . . 54 . 46 . 13566–13570 . 10.1002/anie.201505813 . 26373817 . . 13717077.
14. Web site: 2017. Kevlar Aramid Fiber Technical Guide. May 8, 2021. DuPont.
15. Adler-Abramovich. Lihi . Kol. Nitzan . Yanai. Inbal . Barlam. David . Shneck. Roni Z. . Gazit. Ehud . Rousso . Itay. 3 . December 17, 2010 . Self-Assembled Organic Nanostructures with Metallic-Like Stiffness . Angewandte Chemie . International. . September 28, 2010 . 49 . 51 . 9939–9942 . 10.1002/anie.201002037 . 20878815. 44873277 .
16. Kol . Nitzan . Adler-Abramovich . Lihi . Barlam . David . Shneck . Roni Z. . Gazit . Ehud . Rousso . Itay . 3 . June 8, 2005 . Self-Assembled Peptide Nanotubes Are Uniquely Rigid Bioinspired Supramolecular Structures . . Israel . . 5 . 7 . 1343–1346 . 2005NanoL...5.1343K . 10.1021/nl0505896 . 16178235 . ACS Publications.
17. Niu . Lijiang . Chen . Xinyong . Allen . Stephanie . Tendler . Saul J. B. . 3 . June 6, 2007 . Using the Bending Beam Model to Estimate the Elasticity of Diphenylalanine Nanotubes . . . 23 . 14 . 7443–7446 . 10.1021/la7010106 . 17550276 . ACS Publications.
18. Ivanovska. Irena L.. de Pablo. Pedro J. . Ibarra . Benjamin . Sgalari . Giorgia . MacKintosh . Fred C. . Carrascosa . José L. . Schmidt . Christoph F. . Wuite . Gijs J. L. . 3 . May 7, 2004 . Lubensky . Tom C. . Bacteriophage capsids: Tough nanoshells with complex elastic properties. . . 101 . 20 . 7600–7605 . 2004PNAS..101.7600I . 10.1073/pnas.0308198101. 419652. 15133147. free.
19. Book: Foley. James C.. Powder Materials: Current Research and Industrial Practices III. Abeln. Stephen P.. Stanek. Paul W.. Bartram. Brian D.. Aikin. Beverly. Vargas. Victor D.. John Wiley & Sons, Inc.. 2010. 978-1-11-898423-9. Marquis. Fernand D. S.. Hoboken, NJ. 263. An Overview of Current Research and Industrial Practices of be Powder Metallurgy. 10.1002/9781118984239.ch32. 3.
20. Rho. Jae Young. Ashman. Richard B.. Turner. Charles H.. February 1993. Young's modulus of trabecular and cortical bone material: Ultrasonic and microtensile measurements . Journal of Biomechanics. . 26 . 2 . 111–119. 10.1016/0021-9290(93)90042-d. 8429054. Elsevier Science Direct.
21. Web site: Overview of materials for Brass. May 7, 2021. MatWeb.
22. Web site: Overview of materials for Bronze. May 7, 2021 . MatWeb.
23. Chowdhury . Shafiul . Laugier . Michael T. . Rahman . Ismet Zakia . April–August 2004 . Measurement of the mechanical properties of carbon nitride thin films from the nanoindentation loading curve . . 13 . 4–8 . 1543–1548 . 2004DRM....13.1543C . 10.1016/j.diamond.2003.11.063 . Elsevier Science Direct.
24. Web site: Summerscales. John. September 11, 2019. Composites Design and Manufacture (Plymouth University teaching support materials). May 8, 2021 . Advanced Composites Manufacturing Centre. University of Plymouth.
25. Web site: Kopeliovich. Dmitri. June 3, 2012. Epoxy Matrix Composite reinforced by 70% carbon fibers . May 8, 2021. SubsTech.
26. Book: Bose. Susmita. Materials for Bone Disorders. Banerjee. Dishary. Bandyopadhyay. Amit. Academic Press. 2016. 978-0-12-802792-9. Bose. Susmita. 1–27. Introduction to Biomaterials and Devices for Bone Disorders. 10.1016/B978-0-12-802792-9.00001-X. Bandyopadhyay. Amit.
27. Web site: Copper, Cu; Annealed. May 9, 2021. MatWeb.
28. Book: Synthetic Diamond: Emerging CVD Science and Technology. . 1994 . 978-0-47-153589-8. Spear. Karl E.. 315. 0275-0171. Dismukes. John P..
29. Subhash . Ghatu . Yao . Shuhuai . Bellinger . Brent . Gretz . Michael R. . January 2005 . Investigation of mechanical properties of diatom frustules using nanoindentation . . American Scientific Publishers . 5 . 1 . 50–56 . 10.1166/jnn.2005.006 . 15762160 . Ingenta Connect.
30. Bodros . Edwin . Baley . Christophe . May 15, 2008 . Study of the tensile properties of stinging nettle fibres (Urtica dioica) . . 62 . 14 . 2143–2145 . 10.1.1.299.6908 . 10.1016/j.matlet.2007.11.034 . Elsevier Science Direct.
31. Web site: February 16, 2001. Float glass – Properties and Applications. May 9, 2021. AZO Materials.
32. Web site: Kopeliovich. Dmitri. March 6, 2012. Polyester Matrix Composite reinforced by glass fibers (Fiberglass). May 7, 2021. SubsTech.
33. Web site: Gold material property data. MatWeb. September 8, 2021.
34. Liu. Fang. Ming. Pingbing. Li. Ju. August 28, 2007. Ab initio calculation of ideal strength and phonon instability of graphene under tension. Physical Review B. American Physical Society. 76. 6. 064120. 10.1103/PhysRevB.76.064120. 2007PhRvB..76f4120L. APS Physics.
35. Saheb. Nabi. Jog. Jyoti. October 15, 1999. Natural fibre polymer composites: a review. Advances in Polymer Technology. John Wiley & Sons, Inc.. 18. 4. 351–363. 10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X. free.
36. Web site: High-Density Polyethylene (HDPE). May 9, 2021. Polymer Database. Chemical Retrieval on the Web.
37. Book: Cardarelli, François. Materials Handbook: A Concise Desktop Reference. Springer-Verlag. 2008. 978-3-319-38923-3. 2nd. London. 1421–1439. Cements, Concrete, Building Stones, and Construction Materials. 10.1007/978-3-319-38925-7_15.
38. Web site: Overview of materials for Low Density Polyethylene (LDPE), Molded. May 7, 2021. MatWeb.
39. Web site: Overview of materials for Magnesium Alloy. May 9, 2021. MatWeb.
40. Web site: May 30, 2020. Medium Density Fiberboard (MDF). May 8, 2021. MakeItFrom.
41. Web site: Molybdenum, Mo, Annealed. May 9, 2021. MatWeb.
42. Jackson. Andrew P.. Vincent. Julian F. V.. Turner. R. M.. September 22, 1988. The mechanical design of nacre. Proceedings of the Royal Society B. Royal Society. 234. 1277. 415–440. 1988RSPSB.234..415J. 10.1098/rspb.1988.0056. 0080-4649. 2053-9193. The Royal Society Publishing. 135544277.
43. Web site: 2011. Nylon® 6/6 (Polyamide). May 9, 2021. Poly-Tech Industrial, Inc..
44. Pandey. Dharmendra Kumar. Singh. Devraj. Yadawa. Pramod Kumar. April 2, 2009. Ultrasonic Study of Osmium and Ruthenium. Platinum Metals Review. Johnson Matthey. 53. 4. 91–97. 10.1595/147106709X430927. May 7, 2021. Ingenta Connect. free.
45. Web site: Gaillac. Romain. Coudert. François-Xavier. July 26, 2020. ELATE: Elastic tensor analysis. May 9, 2021. ELATE.
46. Web site: Polycarbonate. May 9, 2021. DesignerData.
47. Web site: Overview of materials for Polyethylene Terephthalate (PET), Unreinforced. May 9, 2021. MatWeb.
48. Web site: Overview of Materials for Polypropylene, Molded. May 9, 2021. MatWeb.
49. Web site: Young's Modulus: Tensile Elasticity Units, Factors & Material Table. May 9, 2021. Omnexus. SpecialChem.
50. Web site: August 2019. Technical Data – Application Recommendations Dimensioning Aids. May 7, 2021. Stryodur. BASF.
51. Web site: Overview of materials for Polytetrafluoroethylene (PTFE), Molded. May 9, 2021. MatWeb.
52. Boyd. Euan J.. Uttamchandani. Deepak. 2012. Measurement of the Anisotropy of Young's Modulus in Single-Crystal Silicon. Journal of Microelectromechanical Systems. Institute of Electrical and Electronics Engineers. 21. 1. 243–249. 10.1109/JMEMS.2011.2174415. 1057-7157. 1941-0158. IEEE Xplore. 39025763.
53. Web site: February 5, 2001. Silicon Carbide (SiC) Properties and Applications. May 9, 2021. AZO Materials.
54. Forró . László . Salvetat . Jean-Paul . Bonard . Jean-Marc . Bacsa . Revathi Ramachandran . Thomson . Neil H. . Garaj . Slaven . Le . Thien-Nga . Gaál . Richard . Kulik . Andrzej J. . Ruzicka . Barbara . Degiorgi . Leonardo . 3 . January 2002 . Thorpe . Michael F. . Tománek . David . David Tománek . Enbody . Richard J. . Electronic and Mechanical Properties of Carbon Nanotubes . Science and Application of Nanotubes . Fundamentals Materials Research . Boston, MA . . 297–320 . 10.1007/0-306-47098-5_22 . 978-0-306-46372-3 . ResearchGate.
55. Yang. Yi-Hsuan. Li. Wenzhi. January 24, 2011. Radial elasticity of single-walled carbon nanotube measured by atomic force microscopy. Applied Physics Letters. American Institute of Physics. 98. 4. 041901. 2011ApPhL..98d1901Y. 10.1063/1.3546170.
56. Web site: July 5, 2012. ASTM A36 Mild/Low Carbon Steel. May 9, 2021. AZO Materials.
57. Web site: Titanium, Ti. May 7, 2021. MatWeb.
58. Book: Materials Properties Handbook: Titanium Alloys. ASM International. 1994. 978-0-87-170481-8. Boyer. Rodney. Materials Park, OH. Welsch. Gerhard. Collings. Edward W..
59. Web site: U.S. Titanium Industry Inc.. July 30, 2002. Titanium Alloys – Ti6Al4V Grade 5. May 9, 2021. AZO Materials.
60. Staines. Michael. Robinson. W. H.. Hood. J. A. A.. September 1981. Spherical indentation of tooth enamel. Journal of Materials Science. Springer. 16. 9. 2551–2556. 1981JMatS..16.2551S. 10.1007/bf01113595. Springer Link. 137704231.
61. Web site: January 21, 2002. Tungsten Carbide – An Overview. May 9, 2021. AZO Materials.
62. Book: Green. David W.. Wood Handbook: Wood as an Engineering Material. Winandy. Jerrold E.. Kretschmann. David E.. Forest Products Laboratory. 1999. Madison, WI. 4–8. Mechanical Properties of Wood. https://web.archive.org/web/20180720153345/https://www.fpl.fs.fed.us/documnts/fplgtr/fplgtr113/ch04.pdf. 2018-07-20.
63. Web site: August 13, 2013. Wrought Iron – Properties and Applications. May 9, 2021. AZO Materials.
64. Chou. Hung-Ming. Case. E. D.. November 1988. Characterization of some mechanical properties of polycrystalline yttrium iron garnet (YIG) by non-destructive methods. Journal of Materials Science Letters. 7. 11. 1217–1220. 10.1007/BF00722341. SpringerLink. 135957639.
65. Web site: Yttrium Iron Garnet. May 7, 2021. Deltronic Crystal Industries, Inc.. December 28, 2012.
66. Web site: July 23, 2001. An Introduction to Zinc. May 9, 2021. AZO Materials.