Yaté Dam Explained

Yaté Dam
Location Map:New Caledonia
Coordinates:-22.1518°N 166.8813°W
Country:France
Location:Yaté, South Province, New Caledonia
Purpose:Power
Status:O
Construction Began:1955
Owner:New Caledonian Society Energy (ENERCAL)
Dam Crosses:Yaté River
Dam Length:580m (1,900feet)
Dam Height:61m (200feet)
Spillway Type:Controlled overflow, three tainter gates
Res Name:Lake Yaté
Res Capacity Total:315000000m2
Res Catchment:435km2
Res Surface:40km2
Plant Name:Yaté Hydroelectric Power Station
Plant Coordinates:-22.1534°N 166.9111°W
Plant Commission:1958
Plant Turbines:4 x 17 MW Francis-type
Plant Hydraulic Head:157m (515feet)
Plant Capacity:68 MW
Plant Annual Gen:307 GWh

The Yaté Dam is an arch dam on the Yaté River in Yaté commune of New Caledonia, France. The primary purpose of the dam is hydroelectric power generation and it supports a 68 MW power station. Plans for the project began in the early 1950s and the dam was designed by Coyne et Bellier. The owner and operator of the project, New Caledonian Society Energy (ENERCAL), was established on 27 August 1955 to implement the project. Construction began that year and the power station was commissioned in 1958. The dam and entire scheme was inaugurated by Jacques Soustelle, then Minister of State in charge of Overseas Departments, on 21 September 1959. It is the tallest dam and creates the largest reservoir in New Caledonia.[1]

While the main retaining portion of the dam is an arch design, it also has a concrete gravity section and an earthen and rock-fill section. The arch dam has a height of 60m (200feet) and length of 200m (700feet). On its left side adjoins the gravity section which serves as a spillway and is 61m (200feet) tall. It is 100m (300feet) long. The embankment section located direct the northwest of the gravity portion is 280m (920feet) long. Water from the dam is diverted through the hillsides via two 2600m (8,500feet) long penstocks to the power station downstream along the Yaté River in the town of Yaté. The difference in elevation between the dam and power station affords a hydraulic head (water drop) of 157m (515feet). Within the power station lies four 17 MW Francis turbine-generates which produce an average of 307 GWh annually.[1]

Notes and References

  1. Web site: Hydroelectric Yaté . New Caledonian Society Energy (ENERCAL) . 16 April 2014.