The initial design was the unpowered model 1100. This was followed by the present production 1200C motorglider. The project started off in 1980 as a hobby design between Sven-Olof Ridder and Harald Undén, who later founded Radab to produce the design. By 1983 they had developed the custom airfoil section and tested it in a wind tunnel.
The first unpowered 1100 model flew in 1985, but the following year, as they geared up for kit production the factory burnt down, including all the fibreglass molds that they had built. Only two 1200 C aircraft kits had been produced before the molds were destroyed. One of these was completed in time to be flown at the 1987 Paris Airshow.
By 1990 the molds had been replaced and the first new 1200 C was completed. The first amateur-built Windex was completed from a kit in 1996. By 1999 WindexAir AB had assumed production from Radab.
The 1200 C is built from a combination of carbon-fiber-reinforced polymer and fibreglass. The aircraft is fully aerobatic and stressed to +9/-6g. The 12.10NaN0 span wing has carbon fibre spars and is of a semi-tapered planform. The wing employs a custom Radab KTH-FFA 17% thickness airfoil and features both Schempp-Hirth-style upper surface air brakes and 22.5% chord flaps for glidepath control. The König SC-430 150NaN0 two-stroke three-cylinder engine is mounted in tractor configuration and has a variable-pitch, fully feathering propeller.[4] [5]
When it was in production the Windex 1200 C was supplied in three kits, fuselage, wings and engine and propeller.[6]
In 1991 the prototype was flown at the FAI World Glider Aerobatic Championships held at Zielona Góra, Poland, winning two bronze medals.
In August 2011 there were four Windex motor gliders and one glider registered in the United States with the Federal Aviation Administration. All are in the Experimental - Amateur-built category.[7]