| Wheeler Dam | |||||||||
| Name Official: | Wheeler Dam | ||||||||
| Dam Crosses: | Tennessee River | ||||||||
| Res Name: | Wheeler Lake | ||||||||
| Location: | Lauderdale / Lawrence counties, Alabama, United States | ||||||||
| Operator: | Tennessee Valley Authority | ||||||||
| Dam Length: | 6342feet | ||||||||
| Dam Height: | 72feet | ||||||||
| Construction Began: | November 21, 1933 | ||||||||
| Opening: | November 9, 1936 | ||||||||
| Coordinates: | 34.8069°N -87.3819°W | ||||||||
| Extra: |
| ||||||||
Wheeler Dam is a hydroelectric dam on the Tennessee River between Lauderdale County and Lawrence County in Alabama. It is one of nine dams on the river owned and operated by the Tennessee Valley Authority, which built the dam in the mid-1930s as part of a New Deal-era initiative to improve navigation on the river and bring flood control and economic development to the region. The dam impounds the Wheeler Lake of 67070acres and its tailwaters feed into Wilson Lake.
Wheeler Dam is named for Civil War general and U.S. Congressman Joseph Wheeler.[1] Congressman Wheeler was an early advocate of federal development of the Muscle Shoals area.[2] The dam was listed on the National Register of Historic Places in 2016.[3]
Wheeler Dam is located 275miles above the mouth of the Tennessee River, a few miles downstream from the river's Elk River confluence. The dam is roughly 7miles southwest of Rogersville and about 30miles downstream from Decatur. The dam's reservoir stretches for 74miles along the river to the base of Guntersville Dam to the east. Wilson Dam and the city of Muscle Shoals are located just 15miles downstream of Wheeler Dam. Alabama State Route 101 (Wheeler Dam Highway) crosses the top of the dam.
At 72feet high, Wheeler is the longest of TVA's Tennessee River dams. The dam is 6342feet long at its crest, and has an electrical generating capacity of 411,800 kilowatts. The dam's spillway is equipped with 60 tainter gates with a combined discharge of . The dam's reservoir has 1027miles of shoreline and 67070acres of water surface, and has a flood-storage capacity of 326484acre.ft.[4]
Wheeler Dam has two locks for river traffic, the main lock being 110feetby600feetft (byft) and an auxiliary lock measuring 60feetby360feetft (byft). The locks raise and lower vessels up to 52feet between Wheeler and Wilson lakes.
The stretch of the Tennessee River between Decatur and Florence drops over 130feet in elevation, creating what was once a series of rapids known as the Muscle Shoals and the Elk River Shoals. Along with the Tennessee River Gorge to the east, these shoals had long been an impediment to river navigation, effectively isolating the upper Tennessee Valley from the nation's major inland waterways. Canal work in the 19th century had improved navigation through the shoals, but were insufficient for major river traffic. In 1898, Congressman Joe Wheeler introduced legislation in Congress that obtained federal funding for navigation improvements. The construction of Wilson Dam in the 1920s and various other improvements helped create a 6feet channel over the shoals, but even then navigation was only possible during times of high water flow. The Corps of Engineers had planned to build a dam at the Wheeler site in the early 1930s, and had gained authorization for the dam's lock, although the project was assumed by the Tennessee Valley Authority shortly after the Authority's creation in 1933. Construction work on Wheeler Dam began on November 21, 1933, the second major dam construction project (after Norris) attempted by TVA.
The construction of Wheeler Dam required the purchase of 103400acres of land, 31228acres of which had to be cleared. 840 families, 176 graves, and 30miles of roads had to be relocated. Work began as soon as possible as an unemployment relief measure, and at peak activity the project employed 4,700 workers. As TVA lacked dam construction experience, the Authority relied heavily on the Army Corps of Engineers and the U.S. Bureau of Reclamation for the dam's design. The Army Corps also designed and built the dam's locks.
Wheeler Dam was completed on November 9, 1936, constructed at a cost of $87,655,000. Dredge work continued until the following year to extend the navigation channel to Guntersville Dam, which at the time was under construction.