Weather buoys are instruments which collect weather and ocean data within the world's oceans, as well as aid during emergency response to chemical spills, legal proceedings, and engineering design. Moored buoys have been in use since 1951, while drifting buoys have been used since 1979. Moored buoys are connected with the ocean bottom using either chains, nylon, or buoyant polypropylene. With the decline of the weather ship, they have taken a more primary role in measuring conditions over the open seas since the 1970s. During the 1980s and 1990s, a network of buoys in the central and eastern tropical Pacific Ocean helped study the El Niño-Southern Oscillation. Moored weather buoys range from 1.5- in diameter, while drifting buoys are smaller, with diameters of 30cm-40cmcm (10inches-20inchescm). Drifting buoys are the dominant form of weather buoy in sheer number, with 1250 located worldwide. Wind data from buoys has smaller error than that from ships. There are differences in the values of sea surface temperature measurements between the two platforms as well, relating to the depth of the measurement and whether or not the water is heated by the ship which measures the quantity.
The first known proposal for surface weather observations at sea occurred in connection with aviation in August 1927, when Grover Loening stated that "weather stations along the ocean coupled with the development of the seaplane to have an equally long range, would result in regular ocean flights within ten years."[1] Starting in 1939, United States Coast Guard vessels were being used as weather ships to protect transatlantic air commerce.[2]
During World War II The German Navy deployed weather buoys (Wetterfunkgerät See — WFS) at fifteen fixed positions in the North Atlantic and Barents Sea. They were launched from U-boats into a maximum depth of ocean of 1000 fathoms (1,800 metres), limited by the length of the anchor cable. Overall height of the body was 10.5 metres (of which most was submerged), surmounted by a mast and extendible aerial of 9 metres. Data (air and water temperature, atmospheric pressure and relative humidity) were encoded and transmitted four times a day. When the batteries (high voltage dry-cells for the valves, and nickel-iron for other power and to raise and lower the aerial mast) were exhausted, after about eight to ten weeks, the unit self-destructed.[3] [4]
The Navy Oceanographic Meteorological Automatic Device (NOMAD) buoy's 6m (20feet) hull was originally designed in the 1940s for the United States Navy’s offshore data collection program. The United States Navy tested marine automatic weather stations for hurricane conditions between 1956 and 1958, though radio transmission range and battery life was limited.[5] Between 1951 and 1970, a total of 21 NOMAD buoys were built and deployed at sea.[6] Since the 1970s, weather buoy use has superseded the role of weather ships, as they are cheaper to operate and maintain.[7] The earliest reported use of drifting buoys was to study the behavior of ocean currents within the Sargasso Sea in 1972 and 1973.[8] Drifting buoys have been used increasingly since 1979, and as of 2005, 1250 drifting buoys roamed the Earth's oceans.[9]
Between 1985 and 1994, an extensive array of moored and drifting buoys was deployed across the equatorial Pacific Ocean to monitor and help predict the El Niño phenomenon.[10] Hurricane Katrina capsized a 10m (30feet) buoy for the first time in the history of the National Data Buoy Center (NDBC) on August 28, 2005.[11] On June 13, 2006, drifting buoy 26028 ended its long-term data collection of sea surface temperature after transmitting for 10 years, 4 months, and 16 days, which is the longest known data collection time for any drifting buoy.[12] The first weather buoy in the Southern Ocean was deployed by the Integrated Marine Observing System (IMOS) on March 17, 2010.[13]
See also: Weather station. Weather buoys, like other types of weather stations, measure parameters such as air temperature above the ocean surface, wind speed (steady and gusting), barometric pressure, and wind direction. Since they lie in oceans and lakes, they also measure water temperature, wave height, and dominant wave period. Raw data is processed and can be logged on board the buoy and then transmitted via radio, cellular, or satellite communications to meteorological centers for use in weather forecasting and climate study. Both moored buoys and drifting buoys (drifting in the open ocean currents) are used. Fixed buoys measure the water temperature at a depth of 3m (10feet). Many different drifting buoys exist around the world that vary in design and the location of reliable temperature sensors varies. These measurements are beamed to satellites for automated and immediate data distribution.[14] Other than their use as a source of meteorological data, their data is used within research programs, emergency response to chemical spills, legal proceedings, and engineering design. Moored weather buoys can also act as a navigational aid, like other types of buoys.
Weather buoys range in diameter from 1.5-. Those that are placed in shallow waters are smaller in size and moored using only chains, while those in deeper waters use a combination of chains, nylon, and buoyant polypropylene.[15] Since they do not have direct navigational significance, moored weather buoys are classed as special marks under the IALA scheme, are coloured yellow, and display a yellow flashing light at night.
Discus buoys are round and moored in deep ocean locations, with a diameter of 10m-12mm (30feet-39feetm).[16] [17] The aluminum 3adj=onNaNadj=on buoy is a very rugged meteorological ocean platform that has long term survivability. The expected service life of the 3adj=onNaNadj=on platform is in excess of 20 years and properly maintained, these buoys have not been retired due to corrosion. The NOMAD is a unique moored aluminum environmental monitoring buoy designed for deployments in extreme conditions near the coast and across the Great Lakes.[16] NOMADs moored off the Atlantic Canadian coast commonly experience winter storms with maximum wave heights approaching 20m (70feet) into the Gulf of Maine. Drifting buoys are smaller than their moored counterparts, measuring 30cm-40cmcm (10inches-20inchescm) in diameter. They are made of plastic or fiberglass, and tend to be either bi-colored, with white on one half and another color on the other half of the float, or solidly black or blue. It measures a smaller subset of meteorological variables when compared to its moored counterpart, with a barometer measuring pressure in a tube on its top. They have a thermistor (metallic thermometer) on its base, and an underwater drogue, or sea anchor, located 15m (49feet) below the ocean surface connected with the buoy by a long, thin tether.[18]
A large network of coastal buoys near the United States is maintained by the National Data Buoy Center,[19] with deployment and maintenance performed by the United States Coast Guard.[20] For South Africa, the South African Weather Service deploys and retrieves their own buoys, while the Meteorological Service of New Zealand performs the same task for their country.[21] Environment Canada operates and deploys buoys for their country.[22] The Met Office in Great Britain deploys drifting buoys across both the northern and southern Atlantic oceans.[23]
Wind reports from moored buoys have smaller error than those from ships. Complicating the comparison of the two measurements are that NOMAD buoys report winds at a height of 5m (16feet), while ships report winds from a height of 20m-40mm (70feet-130feetm).[24] Sea surface temperature measured in the intake port of large ships have a warm bias of around 0.6C-change due to the heat of the engine room.[25] Since 2000 sea-surface temperatures have increasingly been measured by thermometers on buoys; the apparent cooler temperatures led to an underestimation of global warming since 2000.[26] Fixed buoys measure the water temperature at a depth of 3m (10feet).[14]