Volume hologram explained

Volume holograms are holograms where the thickness of the recording material is much larger than the light wavelength used for recording. In this case diffraction of light from the hologram is possible only as Bragg diffraction, i.e., the light has to have the right wavelength (color) and the wave must have the right shape (beam direction, wavefront profile). Volume holograms are also called thick holograms or Bragg holograms.

Theory

Volume holograms were first treated by H. Kogelnik in 1969[1] by the so-called "coupled-wave theory". For volume phase holograms it is possible to diffract 100% of the incoming reference light into the signal wave, i.e., full diffraction of light can be achieved. Volume absorption holograms show much lower efficiencies. H. Kogelnik provides analytical solutions for transmission as well as for reflection conditions. A good text-book description of the theory of volume holograms can be found in a book from J. Goodman.[2]

Manufacturing

A volume hologram is usually made by exposing a photo-thermo-refractive glass to an interference pattern from an ultraviolet laser. It is also possible to make volume holograms in nonphotosensitive glass by exposing it to femtosecond laser pulses.[3]

Bragg selectivity

In the case of a simple Bragg reflector the wavelength selectivity

\Deltaλ

can be estimated by

\Deltaλ/λΛ/L

, where

λ

is the vacuum wavelength of the reading light,

Λ

is the period length of the grating, and

L

is the thickness of the grating. The assumption is just that the grating is not too strong, i.e., that the full length of the grating is used for light diffraction. Considering that because of the Bragg condition the simple relation

Λ=λ/(2\Deltan)

holds, where

\Deltan

is the modulated refractive index in the material (not the base index) at this wavelength, one sees that for typical values (

λ=500nm,L=1mm,\Deltan=0.01

) one gets

\Deltaλ12.5nm

, showing the extraordinary wavelength selectivity of such volume holograms.

In the case of a simple grating in the transmission geometry the angular selectivity

\Delta\Theta

can be estimated as well:

\Delta\ThetaΛ/d

, where

d

is the thickness of the holographic grating. Here

Λ

is given by

Λ=(λ/2\sin\Theta

).

Using again typical numbers (

λ=500nm,d=1cm,\Theta=45\circ

), one ends up with

\Delta\Theta4 x 10-5rad0.002\circ

, showing the impressive angular selectivity of volume holograms.

Applications of volume holograms

The Bragg selectivity makes volume holograms very important. Prominent examples are:

See also

Notes and References

  1. Coupled-wave theory for thick hologram gratings. H. Kogelnik. Bell System Technical Journal. 48. 2909–2947. November 1969. 9. 10.1002/j.1538-7305.1969.tb01198.x.
  2. Book: Introduction to Fourier optics. J. Goodman. 2005. Roberts & Co. Publishers.
  3. Book: Lasers and Electro-Optics Europe (CLEO EUROPE/EQEC), 2011 Conference on and 12th European Quantum Electronics Conference . Efficient volume Bragg gratings in various transparent materials induced by femtosecond laser pulses . 2011 . 1 . 10.1109/CLEOE.2011.5943325. 978-1-4577-0533-5. Richter . Daniel . Voigtlander . Christian . Becker . Ria . Thomas . Jens . Tunnermann . Andreas . Nolte . Stefan . 38327893 .
  4. Web site: OptiGrate is a Pioneer and Leading Manufacturer of Volume Bragg Gratings . optigrate.com.
  5. Web site: The imaging Bragg Tunable Filter: a new path to integral field spectroscopy and narrow band imaging . Blais-Ouellette S. . Daigle O. . Taylor K. . photonetc.ekomobi.com.
  6. Web site: THz-Raman Spectroscopy Systems . www.coherent.com . 2019-07-21.