Vanaja VAKS explained

Vanaja VAKS (AS-33)
Manufacturer:Vanajan Autotehdas Oy
Production:1960–1963
Class:light military lorry
Layout:4×2
Engine:
Transmission:gearbox:
Fuller 5B-330;
rear axle:
Timken TJ-140
Wheelbase:3 600 mm, 4 000 mm or 4 600 mm
Length:65001NaN1 (with standard wheelbase of 3 600 mm)
Height:25001NaN1[1]
Sp:uk

Vanaja VAKS, later called Vanaja AS-33 is a two-axle, 4×2-driven military lorry produced by the Finnish heavy vehicle producer Vanajan Autotehdas (VAT) in 1960–1963. The biggest customer was Finnish Defence Forces.[1]

Use

The first seven units were handed over to the Finnish Defence Forces on 9 December 1960; however, the measurement drawings were dated just on 31 December, i.e. after the first lorries were already taken into use. The Defence Forces ordered 155 units in total. Most of the vehicles were stationed in transportation units.[1]

In the model name VAK stands for Vanaja lorry and S means soldier or military. VAT changed its model nomenclature system in 1961 after which the VAK was replaced by A. S remained indicating that the model was designated mainly for military use. A number was added to show the engine type; the volume model was with 330 cubic inch Ford Trader engine and therefore named AS-33.[1]

Technical data

Engine

The first models were powered by Ford Trader 510E six-cylinder, 108-hp diesels. In addition, two Bedford petrol engines were used: 3.52-litre Bedford J4 and 4.9-litre Bedford D4 of which latter were only produced three units. Two units were powered by Leyland 0.375 and one by Leyland 0.400.[1]

Transmission

The gearbox is produced by Fuller and the type is 5B-330. The rear axle is Timken TJ-140.[1]

Sources

References

  1. Mäkipirtti: Vanaja VAKS ja AS-33. pp. 80–83.