Urbach energy explained
The Urbach Energy, or Urbach Edge, is a parameter typically denoted
, with dimensions of
energy, used to quantify energetic disorder in the band edges of a
semiconductor. It is evaluated by fitting the
absorption coefficient as a function of energy to an exponential function. It is often used to describe
electron transport in structurally disordered semiconductors such as
hydrogenated amorphous silicon.
[1] Introduction
In the simplest description of a semiconductor, a single parameter is used to quantify the onset of optical absorption: the band gap,
. In this description, semiconductors are described as being able to absorb
photons above
, but are transparent to photons below
.
[2] However, the density of states in 3 dimensional semiconductors increases further from the band gap (this is not generally true in
lower dimensional semiconductors however). For this reason, the absorption coefficient,
, increases with energy. The Urbach Energy quantifies the
steepness of the onset of absorption near the band edge, and hence the broadness of the
density of states. A sharper onset of absorption represents a lower Urbach Energy.
History and name
The Urbach Energy is defined by an exponential increase in absorbance with energy. While an exponential dependence of absorbance had been observed previously in photographic materials,[3] it was Franz Urbach that evaluated this property systematically in crystals. He used silver bromide for his study while working at the Kodak Company in 1953.[4]
Definition
Absorption in semiconductors is known to increase exponentially near the onset of absorption, spanning several orders of magnitude.[5] [6] Absorption as a function of energy can be described by the following equation:[7]
\alpha(E)=\alpha0\expl(
r)
where
and
are fitting parameters with dimensions of inverse length and energy, respectively, and
is the Urbach Energy. This equation is only valid when
. The Urbach Energy is temperature-dependent.
[8] Room temperature values of
for
hydrogenated amorphous silicon are typically between 50 m
eV and 150 meV.
[9] Relationship to charge transport
The Urbach Energy is often evaluated to make statements on the energetic disorder of band edges in structurally disordered semiconductors. The Urbach Energy has been shown to increase with dangling bond density in hydrogenated amorphous silicon and has been shown to be strongly correlated with the slope of band tails evaluated using transistor measurements.[10] For this reason, it can be used as a proxy for activation energy,
, in semiconductors governed by multiple trapping and release. It is important to state that
is not the same as
, since
describes the disorder associated with one band, not both.
Measurement
To evaluate the Urbach Energy, the absorption coefficient needs to be measured over several orders of magnitude. For this reason, high precision techniques such as the constant photocurrent method (CPM)[11] or photothermal deflection spectroscopy are used.
Notes and References
- Book: Brotherton, S. D.. Introduction to Thin Film Transistors: Physics and Technology of TFTs. 2013. Springer International Publishing. 978-3-319-00001-5. en.
- Book: Hook. J. R.. Solid State Physics. Hall. H. E.. 1991-09-05. Wiley. 978-0-471-92804-1. en.
- Eggert. John. Biltz. Martin. 1938-01-01. The spectral sensitivity of photographic layers. Transactions of the Faraday Society. en. 34. 892–901. 10.1039/TF9383400892. 0014-7672.
- Urbach. Franz. 1953-12-01. The Long-Wavelength Edge of Photographic Sensitivity and of the Electronic Absorption of Solids. Physical Review. 92. 5. 1324. 10.1103/physrev.92.1324. 1953PhRv...92.1324U. 0031-899X.
- Tauc. J.. 1970-08-01. Absorption edge and internal electric fields in amorphous semiconductors. Materials Research Bulletin. en. 5. 8. 721–729. 10.1016/0025-5408(70)90112-1. 0025-5408.
- 1982-12-01. Recombination centers in phosphorous doped hydrogenated amorphous silicon. Solid State Communications. en. 44. 10. 1423–1426. 10.1016/0038-1098(82)90023-0. 0038-1098. Wronski. C.R.. Abeles. B.. Tiedje. T.. Cody. G.D.. 1982SSCom..44.1423W.
- Cody. G. D.. Tiedje. T.. Abeles. B.. Brooks. B.. Goldstein. Y.. 1981-11-16. Disorder and the Optical-Absorption Edge of Hydrogenated Amorphous Silicon. Physical Review Letters. 47. 20. 1480–1483. 10.1103/physrevlett.47.1480. 1981PhRvL..47.1480C. 0031-9007.
- Kurik. M. V.. 1971. Urbach rule. Physica Status Solidi A. en. 8. 1. 9–45. 10.1002/pssa.2210080102. 1971PSSAR...8....9K. 244517318 . 1521-396X.
- Stutzmann. M.. 1989-10-01. The defect density in amorphous silicon. Philosophical Magazine B. 60. 4. 531–546. 10.1080/13642818908205926. 1989PMagB..60..531S. 1364-2812.
- Sherman. S.. Wagner. S.. Gottscho. R. A.. 1998-06-04. Correlation between the valence- and conduction-band-tail energies in hydrogenated amorphous silicon. Applied Physics Letters. en. 69. 21. 3242. 10.1063/1.118023. 0003-6951.
- 1983-03-01. Density of the gap states in undoped and doped glow discharge a-Si:H. Solar Energy Materials. en. 8. 4. 411–423. 10.1016/0165-1633(83)90006-0. 0165-1633. Vaněček. M.. Kočka. J.. Stuchlík. J.. Kožíšek. Z.. Štika. O.. Tříska. A.. 1983SoEnM...8..411V.