USCGC Sycamore was built by the Marinette Marine Corporation at Marinette, Wisconsin, launched in July 2001 and commissioned in Cordova, Alaska on 2 July 2002. She has a length of 225feet, a beam of 46feet, and a draft of 13feet. Sycamore is propelled by two Caterpillar diesel engines rated at 3,100 horsepower, and has a top speed of 16 knots. She has a single controllable-pitch propeller, which along with bow and stern thrusters, allow the ship to be maneuvered to set buoys close offshore and in restricted waters. A dynamic global positioning system coupled with machinery plant controls and a chart display and information system allow station-keeping of the ship with an accuracy of within five meters of the planned position without human intervention. Sycamore is also equipped with an oil-skimming system known as the Spilled Oil Recovery System (SORS), which is used in her mission of maritime environmental protection. The cutter has a 2,875 square foot buoy deck area with a crane that is used for servicing large ocean buoys.
USCGC Sycamore has an area of responsibility within the First Coast Guard District which covers the U.S. states of Maine, New Hampshire, Massachusetts, Rhode Island, Connecticut, and New York. While her primary mission is servicing ATON, she is also tasked with maritime law enforcement, marine pollution prevention and response, treaty enforcement, homeland security missions, and search and rescue. Sycamore has an icebreaking capability of 14inches at 3 knots and 3feet backing and ramming.
On 1 August 2006 Sycamore assisted the National Oceanic and Atmospheric Administration (NOAA) by transporting a towing assessment team to the stricken vessel MV Cougar Ace which was listing severely and in danger of sinking.[1] She further assisted NOAA contract salvors by providing soundings in the area of the proposed mooring for the Cougar Ace and monitored the tow for oil spills while escorting the salvors T/T Gladiator and T/T Sea Victory. Sycamore enforced a security zone during the tow.[2] During July 2010 Sycamore responded to the Deepwater Horizon oil spill by transiting the Panama Canal.[3] During the summer of 2012 Sycamore participated in Operation Arctic Shield 2012 accompanied by,, and sister ship while conducting exercises in oil spill skimming under arctic conditions as well as exercises with NORTHCOM and the U.S. Navy.[4] On 28 July 2013, the tug Krystal Sea was maneuvering an attached barge and the barge struck the port bow section of the moored Sycamore causing damage to the railings and deck.[5]
Sycamore arrived at Curtis Bay, Maryland on March 25, 2019, for a midlife maintenance refit. She was then assigned to Newport, Rhode Island after the refit. She arrived in Newport, in May 2020. [6]
Sycamore arrived at St. John's Harbour (Nova Scotia, Canada) on 28 June, 2023 as part of the international recovery operation from the Titan submersible implosion event of 18 June 2023. [7]