The Turbomeca Palouste is a French gas turbine engine, first run in 1952.[1] Designed purely as a compressed air generator, the Palouste was mainly used as a ground-based aircraft engine starter unit. Other uses included rotor tip propulsion for helicopters.
Designed and built by Turbomeca, the Palouste was also built under license in Britain by Blackburn and Rolls-Royce. Originally conceived as an aircraft ground support equipment starter gas generator, it was used also as propulsion for the Sud-Ouest Djinn and other tip-jet powered helicopters.
The Palouste was a very simple unit, its primary purpose being to supply a high flow rate of compressed air to start larger jet engines such as the Rolls-Royce Spey as installed in the Blackburn Buccaneer (this aircraft having no onboard starting system).[2] Air from the centrifugal compressor was divided between external supply (known as bleed air) and its own combustion chamber.
Several British naval aircraft were adapted to carry a Palouste in a wing-mounted air starter pod installation to facilitate engine starting when away from base.[3] A novel use of a surplus Palouste engine was its installation in a custom-built motorcycle known as the Boost Palouste. In 1986 this motorcycle broke an official ACU 1/4 mile speed record at 296km/h. The builder modified the engine to include a primitive afterburner device and noted that pitch changes which occurred during braking and acceleration caused gyroscopic precession handling effects due to the rotating mass of the engine.[4]