Liriodendron tulipifera—known as the tulip tree, American tulip tree, tulipwood, tuliptree, tulip poplar, whitewood, fiddletree, lynn-tree, hickory-poplar, and yellow-poplar—is the North American representative of the two-species genus Liriodendron (the other member is Liriodendron chinense), and the tallest eastern hardwood. It is native to eastern North America from Southern Ontario and possibly southern Quebec to west to Illinois, and east to southwestern Massachusetts, then south to central Florida and Louisiana. It can grow to more than in virgin cove forests of the Appalachian Mountains, often with no limbs until it reaches in height, making it a very valuable timber tree. The tallest individual at the present time (2021) is one called the Fork Ridge Tulip Tree at a secret location in the Great Smoky Mountains of North Carolina. Repeated measurements by laser and tape-drop have shown it to be 191inchesft10inchesin (ftin) in height.[1] This is the tallest known individual tree in eastern North America.
It is fast-growing, without the common problems of weak wood strength and short lifespan often seen in fast-growing species. April marks the start of the flowering period in the Southern United States (except as noted below); trees at the northern limit of cultivation begin to flower in June. The flowers are pale green or yellow (rarely white), with an orange band on the tepals; they yield large quantities of nectar. The tulip tree is the state tree of Indiana, Kentucky, and Tennessee.
The tulip tree is one of the largest of the native trees of eastern North America, known in an extraordinary case to reach the height of 58.5frac=2NaNfrac=2[2] with the next-tallest known specimens in the range.[3] These heights are comparable to the very tallest known eastern white pines, another species often described as the tallest in eastern North America.
The trunk on large examples is typically in diameter, though it can grow much broader. Its ordinary height is and it tends to have a pyramidal crown.[4] It prefers deep, rich, and rather moist soil; it is common throughout the Southern United States. Growth is fairly rapid.[5]
The bark is brown, furrowed, aromatic and bitter. The branchlets are smooth, and lustrous, initially reddish, maturing to dark gray, and finally brown. The wood is light yellow to brown, and the sapwood creamy white; light, soft, brittle, close, straight-grained. Specific gravity: 0.4230; density: .
Winter buds are dark red, covered with a bloom, obtuse; scales becoming conspicuous stipules for the unfolding leaf, and persistent until the leaf is fully grown. Flower-bud enclosed in a two-valved, caducous bract.
The alternate leaves are simple, pinnately veined, measuring long and wide. They have four lobes, and are heart-shaped or truncate or slightly wedge-shaped at base, entire, and the apex cut across at a shallow angle, making the upper part of the leaf look square; midrib and primary veins prominent. They come out of the bud recurved by the bending down of the petiole near the middle bringing the apex of the folded leaf to the base of the bud, light green, when full grown are bright green, smooth and shining above, paler green beneath, with downy veins. In autumn they turn a clear, bright yellow. Petiole long, slender, angled.
Harriet Louise Keeler provided a description of the tulip tree in Our Native Trees and How to Identify Them.
Originally described by Carl Linnaeus, Liriodendron tulipifera is one of two species (see also L. chinense) in the genus Liriodendron in the magnolia family. The name Liriodendron is Greek for "lily tree".[7] It is also called the tuliptree Magnolia, or sometimes, by the lumber industry, as the tulip-poplar or yellow-poplar. However, it is not closely related to true lilies, tulips or poplars.
The tulip tree has impressed itself upon popular attention in many ways, and consequently has many common names. The tree's traditional name in the Miami-Illinois language is oonseentia. Native Americans so habitually made their dugout canoes of its trunk that the early settlers west of the Appalachian Mountains called it Canoewood. The color of its wood gives it the name Whitewood. In areas near the Mississippi River it is called a poplar largely because of the fluttering habits of its leaves, in which it resembles trees of that genus. It is sometimes called "fiddle tree," because its peculiar leaves, with their arched bases and in-cut sides, suggest the violin shape.[8]
The external resemblance of its flowers to tulips named it the Tulip-tree. In their internal structure, however, they are quite different. Instead of the triple arrangements of stamens and pistil parts, they have indefinite numbers arranged in spirals.[9]
In the Cretaceous age the genus was represented by several species, and was widely distributed over North America and Europe. Its remains are also found in Tertiary rocks.
Today the tulip tree is one of the largest and most valuable hardwoods of eastern North America, thriving in temperate deciduous forests east of the Mississippi River. It prefers rolling hills or mountains with moist, well-drained soil and is rarely found on coastal plains.[10] It is native southern Ontario and northern Ohio south to the Gulf of Mexico and from extreme southern New York and Connecticut south to Louisiana and northern Florida.[11] It extends south to north Florida, and is rare west of the Mississippi River, but is found occasionally for ornamentals. Its finest development is in the Southern Appalachian mountains, where trees may exceed in height. It was introduced into Great Britain before 1688 in Bishop Compton's garden at Fulham Palace and is now a popular ornamental in streets, parks, and large gardens.[12] The Appalachian Mountains and adjacent Piedmont running south from Pennsylvania to Georgia contained 75 percent of all yellow-poplar growing stock in 1974.[13]
Parts of east-central Florida near Orlando have an ecotype with similar-looking leaves to the coastal plain variant of the Carolinas; it flowers much earlier (usually in March, although flowering can begin in late January), with a smaller yellower bloom than other types. This east central Florida ecotype/Peninsular allozyme group seems to have the best ability to tolerate very wet conditions, where it may grow short pencil-like root structures (pneumatophores) similar to those produced by other swamp trees in warm climates. Superior resistance to drought, pests and wind is also noted. Some individuals retain their leaves all year unless a hard frost strikes. Places where it may be seen include Dr. Howard A. Kelly Park, Lake Eola Park, Spring Hammock Preserve, Big Tree Park and the University of Central Florida Arboretum.
Liriodendron tulipifera is generally considered to be a shade-intolerant species that is most commonly associated with the first century of forest succession. In Appalachian forests, it is a dominant species during the 50–150 years of succession, but is absent or rare in stands of trees 500 years or older. One particular group of trees survived in the grounds of Orlagh College, Dublin for 200 years, before having to be cut down in 1990.[14] On mesic, fertile soils, it often forms pure or nearly pure stands. It can and does persist in older forests when there is sufficient disturbance to generate large enough gaps for regeneration.[15] Individual trees have been known to live for up to around 500 years.[16]
All young tulip trees and most mature specimens are intolerant of prolonged inundation; however, a coastal plain swamp ecotype in the southeastern United States is relatively flood-tolerant.[17] This ecotype is recognized by its blunt-lobed leaves, which may have a red tint.Liriodendron tulipifera produces a large amount of seed, which is dispersed by wind. The seeds typically travel a distance equal to 4–5 times the height of the tree, and remain viable for 4–7 years. The seeds are not one of the most important food sources for wildlife, but they are eaten by a number of birds and mammals.
Vines, especially wild grapevines, are known to be extremely damaging to young trees of this species. Vines are damaging both due to blocking out sunlight, and increasing weight on limbs which can lead to bending of the trunk and/or breaking of limbs.
In terms of its role in the ecological community, L. tulipifera does not host a great diversity of insects, with only 28 species of moths associated with the tree.[18] Among specialists, L. tulipifera is the sole host plant for the caterpillars of C. angulifera, a giant silkmoth found in the eastern United States.[19] Several generalist species use L. tulipifera. It is a well-known host for the large, green eggs of the Papilio glaucus, the eastern tiger swallowtail butterfly, which are known to lay their eggs exclusively among plants in the magnolia and rose families of plants, primarily in mid-late June through early August, in some states.[20] [21]
Liriodendron tulipifera is cultivated, and grows readily from seeds. These should be sown in fine soft soil in a cool and shady area. If sown in autumn they come up the succeeding spring, but if sown in spring they often remain a year in the ground. John Loudon noted that seeds from the highest branches of old trees are most likely to germinate. It is readily propagated from cuttings and easily transplanted.
Tulip trees make magnificently shaped specimen trees, and are very large, growing to about in good soil. They grow best in deep well-drained loam which has thick dark topsoil. They show stronger response to fertilizer compounds (those with low salt index are preferred) than most other trees, but soil structure and organic matter content are more important. In the wild it is occasionally seen around serpentine outcrops.[22] The southeastern coastal plain and east central Florida ecotypes occur in wet but not stagnant soils which are high in organic matter. All tulip trees are unreliable in clay flats which are subject to ponding and flooding.
Like other members of the Magnoliaceae family, they have fleshy roots that are easily broken if handled roughly. Transplanting should be done in early spring, before leaf-out; this timing is especially important in the more northern areas. Fall planting is often successful in Florida. The east central Florida ecotype may be more easily moved than other strains because its roots grow over nine or ten months every year—several months longer than other ecotypes. Most tulip trees have low tolerance of drought, although Florida natives (especially the east central ecotype) fare better than southeastern coastal plain or northern inland specimens.
It is recommended as a shade tree. The tree's tall and rapid growth is a function of its shade intolerance. Grown in the full sun, the species tends to grow shorter, slower, and rounder, making it adaptable to landscape planting. In forest settings, most investment is made in the trunk (i.e., the branches are weak and easily break off, a sign of axial dominance) and lower branches are lost early as new, higher branches closer to the sun continue the growth spurt upward. A tree just 15 years old may already reach in height with no branches within reach of humans standing on the ground.
In the UK the species[23] and its variegated cultivar 'Aureomarginatum'[24] have both gained the Royal Horticultural Society's Award of Garden Merit.[25]
Liriodendron tulipifera has been introduced to many temperate parts of the world, at least as far north as Sykkylven, Norway and Arboretum Mustila, Finland.[26] [27] A few nurseries in Finland offer this species even though it is not fully hardy there and tends to be held to shrub form.[28] [29]
It is occasionally cultivated in tropical highlands, as in Costa Rica and Colombia. In the latter nation it is a street tree at Bogota.[30]
Nectar is produced in the orange part of the flowers. The species is a significant honey plant in the eastern United States, yielding a dark reddish, fairly strong honey unsuitable for table honey but claimed to be favorably regarded by some bakers[31] One 20-year-old tree produces enough nectar for 4lb of honey.[32]
See main article: Tulipwood. Though not a poplar at all, the soft, fine-grained wood of tulip trees is known by that name (short for yellow poplar) in the U.S., but marketed abroad as "American tulipwood" or by other names. It is very widely used where a cheap, easy-to-work and stable wood is needed. The sapwood is usually a creamy off-white color. While the heartwood is usually a pale green, it can take on streaks of red, purple, or even black; depending on the extractives content (i.e. the soil conditions where the tree was grown, etc.). It is clearly the wood of choice for use in organs, due to its ability to take a fine, smooth, precisely cut finish and so to effectively seal against pipes and valves. It is also commonly used for siding clapboards. Its wood may be compared in texture, strength, and softness to white pine.
Used for interior finish of houses, for siding, for panels of carriages, for coffin boxes, pattern timber, and wooden ware. During scarcity of the better qualities of white pine, tulip wood has taken its place to some extent, particularly when very wide boards are required.
It also has a reputation for being resistant to termites, and in the Upland South (and perhaps elsewhere) house and barn sills were often made of tulip wood beams.
The tulip tree has been referenced in many poems and the namesakes of other poems, such as William Stafford's "Tulip Tree."[33] It is also a plot element in the Edgar Allan Poe short story "The Gold-Bug".[34]
Another form of art that the tulip tree is a major part of is wood carving. The tulip poplar can be very useful and has been one of the favorite types of trees for wood carving by sculptors such as Wilhelm Schimmel and Shields Landon Jones.[35] [36]