Vehicular traffic can be either free or congested. Traffic occurs in time and space, i.e., it is a spatiotemporal process. However, usually traffic can be measured only at some road locations (for example, via road detectors, video cameras, probe vehicle data, or phone data). For efficient traffic control and other intelligent transportation systems, the reconstruction of traffic congestion is necessary at all other road locations at which traffic measurements are not available. Traffic congestion can be reconstructed in space and time (Fig. 1) based on Boris Kerner’s three-phase traffic theory with the use of the ASDA and FOTO models introduced by Kerner.[1] [2] [3] [4] [5] Kerner's three-phase traffic theory and, respectively, the ASDA/FOTO models are based on some common spatiotemporal features of traffic congestion observed in measured traffic data.
Common spatiotemporal empirical features of traffic congestion are those spatiotemporal features of traffic congestion, which are qualitatively the same for different highways in different countries measured during years of traffic observations. In particular, common features of traffic congestion are independent on weather, road conditions and road infrastructure, vehicular technology, driver characteristics, day time, etc.
Kerner's definitions [S] and [J], respectively, for the synchronized flow and wide moving jam phases in congested traffic[6] [7] [8] are examples of common spatiotemporal empirical features of traffic congestion.
In empirical observations, traffic congestion occurs usually at a highway bottleneck as a result of traffic breakdown in an initially free flow at the bottleneck. A highway bottleneck can result from on- and off-ramps, road curves and gradients, road works, etc.
In congested traffic (this is a synonym term to traffic congestion), a phenomenon of the propagation of a moving traffic jam (moving jam for short) is often observed. A moving jam is a local region of low speed and great density that propagates upstream as a whole localized structure. The jam is limited spatially by two jam fronts. At the downstream jam front, vehicles accelerate to a higher speed downstream of the jam. At the upstream jam front, vehicles decelerate while approaching the jam.
A wide moving jam is a moving jam that exhibits the characteristic jam feature [J], which is a common spatiotemporal empirical feature of traffic congestion. The jam feature [J] defines the wide moving jam traffic phase in congested traffic as follows.
A wide moving jam is a moving traffic jam, which exhibits the characteristic jam feature [J] to propagate through any bottlenecks while maintaining the mean velocity of the downstream jam front denoted by
vg
Kerner's jam feature [J] can be explained as follows. The motion of the downstream jam front results from acceleration of drivers from a standstill within the jam to traffic flow downstream of the jam. After a vehicle has begun to accelerate escaping from the jam, to satisfy safety driving, the following vehicle begins to accelerate with a time delay. We denote the mean value of this time delay in vehicle acceleration at the downstream jam front by
| (a) | |
| \tau | |
| del,jam |
| 1 | |
| \rhomax |
\rhomax
vg
vg=-
| 1 | ||||||||||||
|
(1)
When traffic parameters (percentage of long vehicles, weather, driver characteristics, etc.) do not change over time,
| (a) | |
| \tau | |
| del,jam |
\rhomax
vg
In contrast with the jam feature [J], the mean velocity of the downstream front of synchronized flow is not self-maintained during the front propagation. This is the common feature of synchronized flow that is one of the two phases of traffic congestion.
A particular case of this common feature of synchronized flow is that the downstream synchronized flow front is usually caught at a highway bottleneck. This pinning of the downstream front of synchronized flow at the bottleneck is called the catch effect. Note that at this downstream front of synchronized flow, vehicles accelerate from a lower speed within synchronized flow upstream of the front to a higher speed in free flow downstream of the front.
Synchronized flow is defined as congested traffic that does not exhibit the jam feature [J]; in particular, the downstream front of synchronized flow is often fixed at the bottleneck.
Thus Kerner's definitions [J] and [S] for the wide moving jam and synchronized flow phases of his three-phase traffic theory[6] [7] [8] are indeed associated with common empirical features of traffic congestion.
Vehicle speeds measured with road detectors (1 min averaged data) illustrate Kerner's definitions [J] and [S] (Fig. 2 (a, b)). There are two spatiotemporal patterns of congested traffic with low vehicle speeds in Fig. 2 (a). One pattern of congested traffic propagates upstream with almost constant mean velocity of the downstream pattern front through the freeway bottleneck. According to the definition [J] this pattern of congested traffic belongs to the "wide moving jam" traffic phase. In contrast, the downstream front of the other pattern of the congested traffic is fixed at the bottleneck. According to the definition [S] this pattern of congested traffic belongs to the "synchronized flow" traffic phase (Fig. 2 (a) and (b)).
The FOTO (Forecasting of traffic objects) model reconstructs and tracks regions of synchronized flow in space and time. The ASDA (Automatische Staudynamikanalyse: Automatic Tracking of Moving Jams) model reconstructs and tracks wide moving jams. The ASDA/FOTO models are devoted to on-line applications without calibration of model parameters under different environment conditions, road infrastructure, percentage of long vehicles, etc.
Firstly, the ASDA/FOTO models identify the synchronized flow and wide moving jam phases in measured data of congested traffic. One of the empirical features the synchronized flow and wide moving jam phases used in the ASDA/FOTO models for traffic phase identification is as follows: Within a wide moving jam, both the speed and flow rate are very small (Fig. 2 (c-f)). In contrast, whereas the speed with the synchronized flow phase is considerably lower than in free flow (Fig. 2 (c, e)), the flow rate in synchronized flow can be as great as in free flow (Fig. 2 (d, f)).
Secondly, based on the abovementioned common features of wide moving jams and synchronized flow, the FOTO model tracks the downstream and upstream fronts of synchronized flow denoted by
| (syn) | |
| x | |
| down |
(t)
| (syn) | |
| x | |
| up |
(t)
t
| (jam) | |
| x | |
| down |
(t)
| (jam) | |
| x | |
| up |
(t)
In other words, the tracking of synchronized flow by the FOTO model and wide moving jams by the ASDA model is performed at road locations at which no traffic measurements are available, i.e., the ASDA/FOTO models make the forecasting of the front locations of the traffic phases in time. The ASDA/FOTO models enable us to predict the merging and/or the dissolution of one or more initially different synchronized flow regions and of one or more initially different wide moving jams that occur between measurement locations.
While the downstream front of synchronized flow at which vehicles accelerate to free flow is usually fixed at the bottleneck (see Fig. 2 (a, b)), the upstream front of synchronized flow at which vehicles moving initially in free flow must decelerate approaching synchronized flow can propagate upstream. In empirical (i.e., measured) traffic data, the velocity of the upstream front of synchronized flow depends usually considerably both on traffic variables within synchronized flow downstream of the front and within free flow just upstream of this front. A good correspondence with empirical data is achieved, if a time-dependence of the location of the synchronized flow front is calculated by the FOTO model with the use of a so-called cumulative flow approach:
| (syn) | |
| x | |
| up |
(t)=\mu
| 1 | |
| n |
| t | |
| \int | |
| t0 |
(qS(t)-qF(t))dt, t\geqt0 (2)
where
qF
qS
\mu
n
There are two main approaches for the tracking of wide moving jams with the ASDA model:
The current velocity
v(jam)
v(jam)(t)=
| q2(t)-q1(t) | |
| \rho2(t)-\rho1(t) |
(3)
where
q1
\rho1
q2
\rho2
q1
q2
\rho1
\rho2
If measured data are not available for the tracking of the downstream jam front with the Stokes-shock-wave formula (3), the formula
| (jam) | |
| v | |
| down |
=vg (4)
is used in which
vg
t=t1
x(t)-x(t1)=vg(t-t1), t>t1 (5)
The characteristic jam velocity is illustrated in Fig. 4. Two wide moving jams propagate upstream while maintaining the mean velocity of their downstream fronts. There are two jams following each other in this empirical example.
However, in contrast with the mean velocity of the downstream jam front, the mean velocity of the upstream jam front depends on the flow rate and density in traffic flow upstream of the jam. Therefore, in a general case the use of formula (5) can lead to a great error by the estimation of the mean velocity of the upstream jam front.
In many data measured on German highways has been found
vg ≈ -15km/h
vg
vg
vg
-12>vg>-20km/h
Reconstruction and tracking of spatiotemporal congested patterns with the ASDA/FOTO models is done today online permanently in the traffic control centre of the federal state Hessen (Germany) for 1200 km of freeway network. Since April 2004 measured data of nearly 2500 detectors are automatically analyzed by ASDA/FOTO. The resulting spatiotemporal traffic patterns are illustrated in a space-time diagram showing congested pattern features like Fig. 5. The online system has also been installed in 2007 for North Rhine-Westphalia freeways. The raw traffic data are transferred to WDR, the major public radio broadcasting station from North Rhine-Westphalia in Cologne, who offers traffic messages to the end customer (e. g., radio listener or driver) via broadcast channel RDS. The application covers a part of the whole freeway network with 1900 km of freeway and more than 1000 double loop detectors. In addition, since 2009 ASDA/FOTO models are online in the northern part of Bavaria.
In addition to spatiotemporal reconstruction of traffic congestion (Figs. 1 and 5), the ASDA/FOTO models can provide average traffic flow characteristics within synchronized flow and wide moving jams. In turn, this permits the estimation of either travel time on a road section or travel time along any vehicle trajectory (see examples of trajectories 1–4 in Fig. 5).
Firstly, the ASDA and FOTO models identify transition points for phase transitions along the trajectory of a probe vehicle.[10] [11] Each of the transition points is associated to the front separating spatially two of the three different traffic phases each other (free flow (F), synchronized flow (S), wide moving jam (J)). After the transition points have been found, the ASDA/FOTO models reconstruct regions of synchronized flow and wide moving jams in space and time with the use of empirical features of these traffic phases discussed above (see Figs. 2 and 4).