Townsville road network is a group of roads that provide access to the urban areas of Townsville in Queensland, Australia, and enable travel between the communities. Most of the roads retain their original road or street names, and are not well known by their official names.
In addition to the Bruce Highway, the Flinders Highway, and the Hervey Range Developmental Road, the network[1] consists of the following state-controlled roads:
A number of local roads that also link the localities are not included in this article.
| Country: | AUS |
| State: | QLD |
| Angus Smith Drive Connection Road | |
| Location: | Bruce Highway, Douglas to Douglas–Garbutt Road (University Road), Douglas / Annandale |
| Length Km: | 1.1 |
Angus Smith Drive Connection Road is a state-controlled district road (number 837).[2] [3] It runs from Bruce Highway exit and entry ramps in to the Douglas–Garbutt Road (University Road) on the Douglas / midpoint, a distance of 1.1km (00.7miles).
The road starts at a roundabout intersection just south of the Bruce Highway in Douglas. It runs north and then north-east as a four-lane divided road, known locally as Angus Smith Drive. (A local road of the same name runs west from the roundabout.) The road passes a northbound entry ramp to the Bruce Highway, runs under the highway, passes a southbound exit ramp from the highway, and continues to a roundabout intersection with the Douglas–Garbutt Road (known locally as University Road), where it ends. Its only major intersection is with the Bruce Highway.
| Country: | AUS |
| State: | QLD |
| Discovery Drive Connection Road | |
| Location: | Douglas–Garbutt Road (University Road), Douglas / Annandale to Discovery Drive, Douglas |
| Length Km: | 0.27 |
Discovery Drive Connection Road is a state-controlled district road (number 839).[2] [3] It runs from Douglas–Garbutt Road (University Road) on the Douglas / Annandale midpoint to an intersection with the Townsville University Hospital entry road in Douglas, a distance of 0.27km (00.17miles).
The road starts at a roundabout intersection with Douglas–Garbutt Road just north of the Bruce Highway in Douglas. It runs south-west and then south-east as a mostly four-lane divided road, known locally as Discovery Drive. The road runs under the Bruce Highway and continues to an intersection with the Townsville University Hospital entry road, where it ends, while Discovery Drive continues south as a local road. The road has no major intersections.
| Country: | AUS |
| State: | QLD |
| Douglas–Garbutt Road | |
| Location: | Bruce Highway, Douglas / Annandale to North Townsville Road (Woolcock Street), Garbutt |
| Length Km: | 5.9 |
Douglas–Garbutt Road is a state-controlled district road (number 840).[2] [3] It runs from the Bruce Highway on the Douglas / Annandale midpoint to the North Townsville Road (Woolcock Street) in, a distance of 5.9km (03.7miles).
The road starts at an intersection with the Bruce Highway on the Douglas / Annandale midpoint. It runs north-west as a four-lane divided road, known locally as University Road, following the boundary between Douglas and Annandale. It passes the exits to Discovery Drive Connection Road and Angus Smith Drive Connection Road before reaching the Ross River.
On crossing the river the road turns north and changes name to Nathan Street. It runs between and until it reaches Ross River Road, which it crosses while continuing north before turning slightly north-west. It then runs between and until it reaches Garbutt–Upper Ross Road (Dalrymple Road). After crossing this road it enters Garbutt and turns north as Duckworth Street. It continues north to an intersection with North Townsville Road (Woolcock Street), where it ends. Duckworth Street continues north as a local road.
All distances are from Google Maps. The entire road is within the Townsville local government area.
| Country: | AUS |
| State: | QLD |
| Type: | S |
| Route: | 93 |
| Garbutt–Upper Ross Road | |
| Location: | North Townsville Road (Woolcock Street), Garbutt to Riverway Drive, Kelso |
| Length Km: | 18.7 |
Garbutt–Upper Ross Road is a state-controlled district road (number 835).[2] [3] It runs from North Townsville Road (Woolcock Street) in Garbutt to Riverway Drive in, a distance of 18.7km (11.6miles).
The road starts at an intersection with North Townsville Road (Woolcock Street) in Garbutt. It is signed as State Route 93. It runs south-west as a four-lane divided road, known locally as Dalrymple Road, following the boundary between Garbutt and, then between Garbutt and Vincent. After crossing Douglas–Garbutt Road it runs between Garbutt and Heatley, then between and Heatley, and then through the southern extremity of Mount Louisa. It reaches an intersection where it turns south as Thuringowa Drive. Dalrymple Road continues west as a local road.
Continuing south-east through and passing a small part of, the road arrives at an intersection with Hervey Range Developmental Road and Ross River Road. It continues south through Thuringowa Central as Riverway Drive, passes through an intersection with the Bruce Highway, and then follows the western bank of the Ross River through, and Kelso. The road ends at the entry road to the Ross River Dam. Riverway Drive continues south-west as a local road.
A project to upgrade a 3.1km (01.9miles) section of Riverway Drive, at a cost of $95 million, was expected to start in 2023.[4]
All distances are from Google Maps. The entire road is within the Townsville local government area.
| Country: | AUS |
| State: | QLD |
| Type: | S |
| Route: | 14 |
| North Townsville Road | |
| Location: | Bruce Highway, Deeragun / Mount Low to Townsville Port Road, South Townsville |
| Length Km: | 19.4 |
North Townsville Road is a state-controlled regional road (number 832).[2] [3] It runs from the Bruce Highway on the / midpoint to Townsville Port Road (Southern Port Road / Benwell Road) in, a distance of 19.4km (12.1miles).
The road starts at an intersection with the Bruce Highway on the Deeragun / Mount Low midpoint. It is signed as State Route 14. It runs south-east as a four-lane divided road, following the boundary between Deeragun and Mount Low, then between Deeragun and, then between Burdell and . After passing the exit to Shaw Road to the south-west it becomes known as Woolcock Street and crosses the Bohle River into the locality of . It passes the exit to Ingham Road to the north-east and then turns east.
Continuing east the road passes through Cosgrove and Mount Louisa to Garbutt. It passes the exits to Douglas–Garbutt Road (Duckworth Street) to the south, and Garbutt–Upper Ross Road (Dalrymple Road) to the south-west. It runs between Garbutt and Currajong until it passes the exit to North Ward Road (Hugh Street) to the north-east. It then runs between Currajong and West End, then between West End and, then between West End and before passing the exit to Townsville Connection Road (Charters Towers Road) to the south-west. The road next runs between West End and before crossing Ross Creek into, where it turns north-east.
The road continues north-east as Boundary Street, passing exits to South Townsville Road (Railway Avenue) to the south, and North Ward Road (Saunders Street) to the north. It enters as a two-lane street, and continues to an intersection with Townsville Port Road, known locally as Southern Port Road (to south) and Benwell Road (to north), where it ends.
All distances are from Google Maps. The entire road is within the Townsville local government area.
| Country: | AUS |
| State: | QLD |
| Type: | S |
| Route: | 16 |
| North Ward Road | |
| Location: | North Townsville Road (Woolcock Street), Garbutt / Currajong / West End to North Townsville Road (Boundary Street), Railway Estate (via North Ward) |
| Length Km: | 7.9 |
North Ward Road is a state-controlled district road (number 833), part of which is rated as a local road of regional significance (LRRS).[2] [3] It runs from North Townsville Road (Woolcock Street) on the Garbutt / Currajong / West End tripoint to North Townsville Road (Boundary Street) in Railway Estate, via, a distance of 7.9km (04.9miles).
The road starts at an intersection with North Townsville Road (Woolcock Street) on the Garbutt / Currajong / West End tripoint. It is signed as State Route 16. It runs north-east as Hugh Street, a four-lane divided road, crossing Ingham Road. State Route 16 continues south on Hugh Street. After changing its name to Percy Street and running inside the western boundary of West End the road again changes its name to Bundock Street. It then enters, where it curves to the east.
After entering North Ward the road turns south-east as Warburton Street. At an intersection with Gregory Street the name changes to Eyre Street, and at a roundabout intersection with Oxley Street it changes to Denham Street. The road runs south until it enters the locality of, where it again turns south-east, passing the exit to Sturt Street to the south-west. Next it crosses Flinders Street and then Ross Creek, where it briefly enters South Townsville as Dean Street before turning south-west into Railway Estate as Saunders Street. Again turning south the road ends at an intersection with North Townsville Road (Boundary Street) in Railway Estate. State Route 16 continues south on South Townsville Road (Railway Avenue).
All distances are from Google Maps. The entire road is within the Townsville local government area.
Ross River Road is a state-controlled district road (number 612).[2] [3] It runs from Townsville Connection Road (Bowen Road / Charters Towers Road) in to Garbutt–Upper Ross Road (Thuringowa Drive / Riverway Drive) in Kirwan.
| Country: | AUS |
| State: | QLD |
| Shaw Road | |
| Location: | Bruce Highway, Bohle Plains / Shaw to North Townsville Road, Shaw / Burdell |
| Length Km: | 4.7 |
Shaw Road is a state-controlled district road (number J41).[2] [3] It runs from the Bruce Highway on the Bohle Plains / Shaw midpoint to North Townsville Road on the Shaw / Burdell midpoint, a distance of 4.7km (02.9miles).
The road starts at an intersection with the Bruce Highway at the Bohle Plains / Shaw midpoint. It runs north through the locality of Shaw as a two-lane road, crossing Dalrymple Road before veering north-east, north-west, and north-east again. It ends at an intersection with North Townsville Road on the Shaw / Burdell midpoint. Its only major intersection is with Dalrymple Road.
| Country: | AUS |
| State: | QLD |
| Type: | S |
| Route: | 16 |
| South Townsville Road | |
| Location: | Bruce Highway, Cluden to North Townsville Road (Boundary Street), Railway Estate |
| Length Km: | 6.4 |
South Townsville Road is a state-controlled regional road (number 831).[2] [3] It runs from the Bruce Highway in to North Townsville Road (Boundary Street) in Railway Estate, a distance of 6.4km (04miles).
The road starts at an intersection with the Bruce Highway in Cluden. It runs north-west as Abbott Street (State Route 16), primarily a two-lane road, passing between Cluden and, then between and Idalia, before passing through the northern part of Oonoonba, where it turns north-east and crosses the Ross River. Here it enters Railway Estate and becomes Railway Avenue, primarily a four-lane divided road. It continues north to an intersection with North Townsville Road (Boundary Street) in Railway Estate, where it ends, while State Route 16 continues north-east on North Ward Road (Saunders Street). The road has no major intersections.
| Country: | AUS |
| State: | QLD |
| Type: | S |
| Route: | 17 |
| Townsville Connection Road | |
| Location: | Flinders Highway, Stuart to North Townsville Road (Woolcock Street), West End |
| Length Km: | 9.9 |
Townsville Connection Road is a state-controlled district road (number 830), part of which is rated as a local road of regional significance (LRRS).[2] [3] It runs from the Flinders Highway in to North Townsville Road (Woolcock Street) in West End, a distance of 9.9km (06.2miles).
The road starts at an intersection with the Flinders Highway in Stuart. It runs north-west as Stuart Drive (State Route 17), primarily a two-lane road. From Stuart it runs through, then between Wulguru and Cluden before crossing the Bruce Highway. Next it runs between Idalia and before crossing the Ross River into, where it changes name to Bowen Road and becomes a four-lane divided carriageway. It then passes between Mundingburra and Hermit Park before reaching an intersection with Ross River Road.
Turning north-east as Charters Towers Road, it passes between Hermit Park and, then between Hermit Park and Hyde Park, reaching an intersection with North Townsville Road (Woolcock Street), where it ends, while Charters Towers Road continues to the north-east with no route number. The road's only major intersections are with the Bruce Highway and with Ross River Road.
A project to upgrade a 2km (01miles) section of Stuart Drive to four lanes, at a cost of $46.4 million, was expected to commence construction in mid-2023.[5]
| Country: | AUS |
| State: | QLD |
| Townsville Port Road | |
| Location: | Bruce Highway and Flinders Highway, Stuart to Townsville Port, South Townsville |
| Length Km: | 7.8 |
Townsville Port Road is a state-controlled national road (number 841).[2] [3] It runs from the Bruce Highway and Flinders Highway in Stuart to the Townsville Port in South Townsville, a distance of 7.8km (04.8miles).
The road starts at an intersection with the Bruce Highway and the Flinders Highway in Stuart. It runs north as Southern Port Road, a two-lane carriageway, passing through Stuart and a small section of Cluden before turning north-west and crossing the Ross River into South Townsville. It passes the exit to North Townsville Road (Boundary Street) and turns north-east as Benwell Road. It reaches an intersection with Archer Street, where it ends, while Benwell Road continues into the Port area. The road's only major intersection is with North Townsville Road.