Tilted plane photography is a method of employing focus as a descriptive, narrative or symbolic artistic device. It is distinct from the more simple uses of selective focus which highlight or emphasise a single point in an image, create an atmospheric bokeh, or miniaturise an obliquely-viewed landscape. In this method the photographer is consciously using the camera to focus on several points in the image at once while de-focussing others, thus making conceptual connections between these points.
Focus is relative to spatial depth. Selective focus in photography is usually associated with depth of field. A pinhole camera generates an image of infinite relative focus, from a point just outside the camera opening out to infinity. Lenses focus more selectively so that, for objects near the lens, the distance between lens and sensor or film is increased and is shortened for more distant objects, to a point beyond which all is in focus. In telephoto lenses this point may be tens or hundreds of metres from the camera. Wide-angle lenses distinguish differences in depth only up to a short distance, beyond which all is in focus.
Depth of field is an effect that permits bringing objects into focus at varying distances from the camera, and at varying depth between each other, into the field of view. A short lens, as explained above, will bring objects into focus that are relatively close to the camera, but it will also keep focus at greater distances between objects. A telephoto lens will be very shallow in its gamut of focus.
Reducing the size of the aperture of the lens deepens the focus. At a pinhole size this will increase in effect, though the closer the objects are to the camera, the shorter the distance between focussed objects.
Because focus depends on the distance between lens and the sensor or film plane, focus in the space in front of the camera is not on a point but rather on a plane parallel to the film plane.[1] Spherical construction of lenses, rather than the ideal parabolic construction which is rarely and expensively achieved, means that this plane is slightly concave—more so in simple single element lenses and increasingly so with lenses of lower quality construction and materials. Compound lenses are built to correct this "spherical aberration" or "curvature of field".
Varying the distance between the lens and sensor or film plane across the field of view permits focussing on objects at varying distances from the camera. One means of achieving this is to tilt the lens and/or the sensor or film plane in relation to each other. This will mean that individual points in the picture plane will focus on different points of depth, with the effect that the plane of sharp focus will tilt.
This technique is based on the principle of Scheimpflug which, traditionally, is combined with small aperture to increase the gamut of focus beyond that achievable by depth of field alone. Usually no out-of-focus artifacts are desired in the image resulting from Scheimpflug adjustments. Here the converse is true. With the lens at full aperture, the photographer selects points in depth in the scene on which to focus and throws other points out-of-focus. This increases the contrast between the sharp and blurred areas and the selected application of focus and blur remains apparent to the viewer.
A view camera permits full, incrementally calibrated control over this technique, though it is possible to achieve with other cameras and formats. It is possible to achieve similar effects on a 35mm camera or digital single-lens reflex camera (DSLR) using a special tilt-shift lens, or by manually holding a lens that is removed from its mount.
Julia Margaret Cameron was a strong advocate of this use of selective focus. For example, in "Prayer and Praise", produced in 1865, there is a deliberate placement of focus at more than three points: on the face and parts of the body of the foreground child; and faces of mother and father; while a second child's face is thrown radically out of focus.