Tides in marginal seas are tides affected by their location in semi-enclosed areas along the margins of continents and differ from tides in the open oceans. Tides are water level variations caused by the gravitational interaction between the Moon, the Sun and the Earth. The resulting tidal force is a secondary effect of gravity: it is the difference between the actual gravitational force and the centrifugal force. While the centrifugal force is constant across the Earth, the gravitational force is dependent on the distance between the two bodies and is therefore not constant across the Earth. The tidal force is thus the difference between these two forces on each location on the Earth.[1]
In an idealized situation, assuming a planet with no landmasses (an aqua planet), the tidal force would result in two tidal bulges on opposite sides of the earth. This is called the equilibrium tide. However, due to global and local ocean responses different tidal patterns are generated. The complicated ocean responses are the result of the continental barriers, resonance due to the shape of the ocean basin, the tidal waves impossibility to keep up with the Moons tracking, the Coriolis acceleration and the elastic response of the solid earth.[2]
In addition, when the tide arrives in the shallow seas it interacts with the sea floor which leads to the deformation of the tidal wave. As a results, tides in shallow waters tend to be larger, of shorter wavelength, and possibly nonlinear relative to tides in the deep ocean.
The transition from the deep ocean to the continental shelf, known as the continental slope, is characterized by a sudden decrease in water depth. In order to apply to the conservation of energy, the tidal wave has to deform as a result of the decrease in water depth. The total energy of a linear progressive wave per wavelength is the sum of the potential energy (PE) and the kinetic energy (KE). The potential and kinetic energy integrated over a complete wavelength are the same, under the assumption that the water level variations are small compared to the water depth (
η<<H
| λ | |
| \int | |
| 0 |
PE=
| λ | |
| \int | |
| 0 |
KE=
| 1 | |
| 2 |
\rho
| λ | |
| g\int | |
| 0 |
η2dx
where
\rho
g
η
E=\rho
| λ | |
| g\int | |
| 0 |
η2dx
η(x)=Acos(kx)
k
A
Es=
| 1 | |
| 2 |
\rhogA2
A tidal wave has a wavelength that is much larger than the water depth. And thus according to the dispersion of gravity waves, they travel with the phase and group velocity of a shallow water wave:
cp=cg=\sqrt{gh}
FE
FE=
| 1 | |
| 2 |
\rhogA2\sqrt{gh}
The energy flux needs to be conserved and with
\rho
g
FE,1=FE,2
| 2 | |
| \Longrightarrow{A | |
| 1} |
\sqrt{gh1}=
| 2 | |
| {A | |
| 2} |
\sqrt{gh2}
where
h2<h1
A2>A1
When the tidal wave propagates onto the continental shelf, the water depth
(h)
The above explanation is a simplification as not all tidal wave energy is transmitted, but it is partly reflected at the continental slope. The transmission coefficient of the tidal wave is given by:
| A2 | = | |
| A1 |
| 2c1 | |
| (c1+c2) |
This equation indicates that when
c1=c2
c1>c2
The reflected wave amplitude (
A'
| A' | = | |
| A1 |
| c1-c2 | |
| (c1+c2) |
This equation indicates that when
c1=c2
c1>c2
At the continental shelf the reflection and transmission of the tidal wave can lead to the generation of internal tides on the pycnocline. The surface (i.e. barotropic) tide generates these internal tides where stratified waters are forced upwards over a sloping bottom topography.[6] The internal tide extracts energy from the surface tide and propagates both in shoreward and seaward direction.[7] The shoreward propagating internal waves shoals when reaching shallower water where the wave energy is dissipated by wave breaking. The shoaling of the internal tide drives mixing across the pycnocline, high levels carbon sequestration and sediment resuspension.[8] [9] Furthermore, through nutrient mixing the shoaling of the internal tide has a fundamental control on the functioning of ecosystems on the continental margin.[10]
After entering the continental shelf, a tidal wave quickly faces a boundary in the form of a landmass. When the tidal wave reaches a continental margin, it continues as a boundary trapped Kelvin wave. Along the coast, a boundary trapped Kelvin is also known as a coastal Kelvin wave or Edge wave. A Kelvin wave is a special type of gravity wave that can exist when there is (1) gravity and stable stratification, (2) sufficient Coriolis force and (3) the presence of a vertical boundary. Kelvin waves are important in the ocean and shelf seas, they form a balance between inertia, the Coriolis force and the pressure gradient force. The simplest equations that describe the dynamics of Kelvin waves are the linearized shallow water equations for homogeneous, in-viscid flows. These equations can be linearized for a small Rossby number, no frictional forces and under the assumption that the wave height is small compared to the water depth (
η<<h
u momentum equation:
| \partialu | |
| \partialt |
-fv=-g
| \partialη | |
| \partialx |
v momentum equation:
| \partialv | |
| \partialt |
+fu=-g
| \partialη | |
| \partialy |
the continuity equation:
| \partialη | |
| \partialt |
+h(
| \partialu | |
| \partialx |
+
| \partialv | |
| \partialy |
)=0
u
x
v
y
t
f
Kelvin waves are named after Lord Kelvin, who first described them after finding solutions to the linearized shallow water equations with the boundary condition
u(x,y,t)=0
u momentum equation:
v=
| -g | |
| f |
| \partialη | |
| \partialx |
v momentum equation:
| \partialv | |
| \partialt |
=-g
| \partialη | |
| \partialy |
the continuity equation:
| \partialη | |
| \partialt |
+h
| \partialv | |
| \partialy |
=0
Now it is possible to get an expression for
η
| \partial2η | |
| \partialt2 |
-gh
| \partial2η | |
| \partialy2 |
=0
The same can be done for
v
| \partial2v | |
| \partialt2 |
-gh
| \partial2v | |
| \partialy2 |
=0
Both of these equations take the form of the classical wave equation, where
c=\sqrt{gh}
η=-h F(y+ct)
| ||||
| e |
v=\sqrt{gh} F(y+ct)
| ||||
| e |
R=
| \sqrt{gh | |
F(y+ct)
F
The expression of tides as a bounded Kelvin wave is well observable in enclosed shelf seas around the world (e.g. the English channel, the North Sea or the Yellow sea). Animation 1 shows the behaviour of a simplified case of a Kelvin wave in an enclosed shelf sea for the case with (lower panel) and without friction (upper panel). The shape of an enclosed shelf sea is represented as a simple rectangular domain in the Northern Hemisphere which is open on the left hand side and closed on the right hand side. The tidal wave, a Kelvin wave, enters the domain in the lower left corner and travels to the right with the coast on its right. The sea surface height (SSH, left panels of animation 1), the tidal elevation, is maximum at the coast and decreases towards the centre of the domain. The tidal currents (right panels of animation 1) are in the direction of wave propagation under the crest and in the opposite direction under the through. They are both maximum under the crest and the trough of the waves and decrease towards the centre. This was expected as the equations for
η
v
f → 0
The expression of tides as a bounded Kelvin wave is well observable in enclosed shelf seas around the world (e.g. the English channel, the North Sea or the Yellow sea). Animation 1 shows the behaviour of a simplified case of a Kelvin wave in an enclosed shelf sea for the case with (lower panel) and without friction (upper panel). The shape of an enclosed shelf sea is represented as a simple rectangular domain in the Northern Hemisphere which is open on the left hand side and closed on the right hand side. The tidal wave, a Kelvin wave, enters the domain in the lower left corner and travels to the right with the coast on its right. The sea surface height (SSH, left panels of animation 1), the tidal elevation, is maximum at the coast and decreases towards the centre of the domain. The tidal currents (right panels of animation 1) are in the direction of wave propagation under the crest and in the opposite direction under the through. They are both maximum under the crest and the trough of the waves and decrease towards the centre. This was expected as the equations for
η
v
On the enclosed right hand side, the Kelvin wave is reflected and because it always travels with the coast on its right, it will now travel in the opposite direction. The energy of the incoming Kelvin wave is transferred through Poincare waves along the enclosed side of the domain to the outgoing Kelvin wave. The final pattern of the SSH and the tidal currents is made up of the sum of the two Kelvin waves. These two can amplify each other and this amplification is maximum when the length of the shelf sea is a quarter wavelength of the tidal wave. Next to that, the sum of the two Kelvin waves result in several static minima's in the centre of the domain which hardly experience any tidal motion, these are called Amphidromic points. In the upper panel of figure 2, the absolute time averaged SSH is shown in red shading and the dotted lines show the zero tidal elevation level at roughly hourly intervals, also known as cotidal lines. Where these lines intersect the tidal elevation is zero during a full tidal period and thus this is the location of the Amphidromic points.
In the real world, the reflected Kelvin wave has a lower amplitude due to energy loss as a result of friction and through the transfer via Poincare waves (lower left panel of animation 1). The tidal currents are proportional to the wave amplitude and therefore also decrease on the side of the reflected wave (lower right panel of animation 1). Finally, the static minima's are no longer in the centre of the domain as wave amplitude is no longer symmetric. Therefore, the Amphidromic points shift towards the side of the reflected wave (lower panel figure 2).
The dynamics of a tidal Kelvin wave in enclosed shelf sea is well manifested and studied in the North Sea.[13]
When tides enter estuaries or basins, the boundary conditions change as the geometry changes drastically. The water depth becomes shallower and the width decreases, next to that the depth and width become significantly variable over the length and width of the estuary or basin. As a result the tidal wave deforms which affects the tidal amplitude, phase speed and the relative phase between tidal velocity and elevation. The deformation of the tide is largely controlled by the competition between bottom friction and channel convergence. Channel convergence increases the tidal amplitude and phase speed as the energy of the tidal wave is traveling through a smaller area while bottom friction decrease the amplitude through energy loss.[14] The modification of the tide leads to the creation of overtides (e.g.
M4