ThermaSAVE is a panel building system which uses a 4 to 12-inch-thick core of expanded polystyrene (similar to Styrofoam) sandwiched between two sheets of cellulose fiber-reinforced cement board varying in thickness from 3/8 to 7/16 inch, depending on structural requirements. This creates a "stress skinned" panel, also known as structural insulated panels (SIPs). Since c. 1984 H.H. "Hoot" Haddock from Florence, Alabama has been working on perfecting a polystyrene-based building system that would be faster and easier to construct than wood-framed buildings, while having superior insulation and strength.
Haddock has used the panels to construct an 18000square feet Ford showroom and a 32000square feet church, and at trade shows Haddock parks a 3,400-pound pickup truck on a 24-foot-long foam panel ramp which remains straight.
Because expanded polystyrene is 95% air it is an excellent insulator; and the hard cement skin, bonded to the polystyrene, provides the structuralsupport. In combination the ThermaSAVE panels provide the best of bothworlds and have numerous advantages over standard building materials.
After some consultation Haddock participated in an earthquake test conducted in Cincinnati on January 28, 2005, which was filmed by Daily Planet. The two-story building withstood accelerations beyond 7g without losing any screws, whereas the previous record was 4 g. The test continued until the testing machine began to fail, but the building remained intact.
With the success of the tests the ThermaSAVE Building System could be implemented in Iran, Afghanistan and even in areas affected by the 2004 Indian Ocean tsunami by 2006.