The Silver Spade Explained

The Silver Spade was a giant power shovel used for strip mining in southeastern Ohio. Manufactured by Bucyrus-Erie, South Milwaukee, Wisconsin, the model 1950-B was one of two of this model built, the other being its sister ship, the GEM of Egypt. Its sole function was to remove the earth and rock overburden from the coal seam. Attempts to purchase and preserve the shovel from Consol to make it the centerpiece of a mining museum exhibit for $2.6 million fell short. A salvage company began scrapping the machine in January 2009. The boom was dropped using explosives on February 9th, ending any rescue attempts. By March 1st, much of the machine had been cut away.^[1]

Facts and figures

• Began operations – November 1965
• Ended operations – April 2006
• Speed – 1/4 mph (400 m/h)
• Bucket capacity – 105 cu yd (80 m³)
• Operating weight – 14,000,000 lb (7,000 short tons, 6,400 metric tons)
• Height – 220 ft to top of boom (67 m)
• Boom length – 200 feet (61 m)
• Width – 59 ft (18 m)
• Height of crawlers – 8 ft (2.5 m)
• Length of crawlers – 34 ft (10 m)
• Maximum dumping height – 139 ft (42 m)
• Maximum dumping radius – 195 ft (59 m)
• Rating on A.C. motors – 13,500 hp (10.1 MW) peak
• Entire operation of the shovel was controlled by two hand levers and a pair of foot pedals.
• Dug 315,000 lb (143 metric tons) of earth in a single bite, swung 180°, and deposited the load up to 390 ft (119 m) away from the digging points at heights up to 140 ft (42.5 m).
• Machine's four NaNadj=midNaNadj=mid hoist ropes totaled 3,000 ft (914 m) in length.
• Fourteen main digging cycle motors could develop a combined peak of 13,500 hp (10.1 MW) at peak load.
• Automatically leveled through four 54adj=midNaNadj=mid hydraulic jacks.
• Swung a 105 cubic yard (80 m³) dipper from a 200 ft (61 m) boom and a 122 ft (37 m) dipper handle.
• The "GEM of Egypt," the other large shovel, had similar size and weight, etc. statistics. The primary difference was the bucket and boom. The GEM was a 130 cubic-yard (99.4 m³) bucket and 170 ft (52 m) boom, while the Spade sported 105 cubic-yard (80 m³) bucket and 200 ft (61 m) boom.

Dipper arm

The design is unusual, as it uses a knee action crowd, and only these two Bucyrus-Erie 1950-Bs were fitted with this technology.

• crowding is pushing the bucket at the end of a "handle" ("dipper" or "dipper stick") in or out to control the depth of cut or to position for dumping
• With knee-action, the handle is connected to a moveable pivot point rather than being supported directly by the boom.
  • Knee action design made possible the largest shovel ever built, increased digging power, allowed the bucket to move horizontally into the cut and improved swing efficiency, distance, and radius.^[2]

The technology was a requirement of the owners and had to be licensed from Marion Power Shovel, with Marion being allowed to use Bucyrus-Erie's cable crowd system in return.

See also

• Big Brutus
• Big Muskie
• Dragline
• Haul truck
• Excavator
• Marion 6360

References

• Information about the Preservation Effort
• Extreme Mining Machines, by Keith Haddock, Pub by MBI,

External links

• Silver Spade on the Road(date Unknown) The picture of The Silver Spade on the road was taken in April 2001 when the shovel was being moved across Route 519 in New Athens, Ohio
• Cable Blasted 2007
• Harrison Coal and Reclamation Park

40.19°N -81.0542°W

Notes and References

1. Web site: Elmore . Chad . Rest in Pieces . OEM Off-Highway . Ironmarkets, LLC . 24 April 2024 . July 16, 2014.
2. Web site: Berry . Thomas . Increasing the capacity of a stripping shovel . OEM Off-Highway . Ironmarkets. LLC . 25 April 2024 . August 25, 2011.