Strain crystallization explained

Strain crystallization is a phenomenon in which an initially amorphous solid material undergoes a phase transformation due to the application of strain. Strain crystallization occurs in natural rubber, as well as other elastomers and polymers.[1] The phenomenon has important effects on strength and fatigue properties.

How strain crystallization occurs

Strain crystallization occurs when the chains of molecules in a material become ordered during deformation activities in some polymers and elastomers.[2] The three primary factors that affect strain crystallization are the molecular structure of the polymer or elastomer, the temperature, and the deformation being applied to the material.[3] If a polymer's molecular structure is too irregular, strain crystallization can not be induced because it is impossible to order the chains of molecules. In order to induce strain crystallization, the polymer or elastomer is stretched while its temperature is kept above its glass transition temperature. It is also necessary for the yield point of the polymer to be exceeded by the stretching activity. This in turn will ensure that the chains of molecules are straightened.[4] In general, the greater the deformation applied to the material, the higher the rate of crystallization.

Effects of strain crystallization

The mechanical properties of materials are greatly affected by the orientation of the crystals in their micro-structure. The process of strain crystallization directly affects the micro-structure of the material by adding crystalline structures. Strain crystallization's effect on the micro-structure greatly increases the strength of the polymer or elastomer it is induced in. This effect of strain crystallization can be viewed in vulcanized natural rubber, a material that is known for its toughness and tensile stress.

Measuring strain crystallization

There are various techniques for measuring crystallization in rubber, including: x-ray diffraction, specific heat changes, and density changes. Crystallization can also be observed indirectly through its effects on stress–strain and fatigue behavior.

See also

Some polymers that strain crystallize
Some elastomers that strain crystallize
Some elastomers that do not strain crystallize

References

Sources

Notes and References

  1. Rao. I.J.. Rajagopal. K.R.. February 2001. A study of strain-induced crystallization of polymers. International Journal of Solids and Structures. 38. 6–7. 1149–1167. 10.1016/s0020-7683(00)00079-2. 0020-7683.
  2. Battjes. Kevin P.. Kuo. Chung-Mien. Miller. Robert L.. Saam. John C.. May 1995. Strain-Induced Crystallization in Poly[methyl(3,3,3-trifluoropropyl)siloxane] Networks. Macromolecules. 28. 3. 790–792. 10.1021/ma00107a019. 1995MaMol..28..790B . 0024-9297.
  3. Toki. S.. Fujimaki. T.. Okuyama. M.. June 2000. Strain-induced crystallization of natural rubber as detected real-time by wide-angle X-ray diffraction technique. Polymer. 41. 14. 5423–5429. 10.1016/s0032-3861(99)00724-7. 0032-3861.
  4. Web site: Crystallization. polymerdatabase.com. 2018-12-08.