| Spruce Falls | |
| Map: | Saskatchewan#Canada |
| Map Size: | 250px |
| Coordinates: | 55.6011°N -102.0189°W |
| Location: | Saskatchewan, Canada |
| Watercourse: | Swan River |
Spruce Falls was the local name for a small waterfall where the Swan River empties into Sisipuk Lake in north-eastern Saskatchewan, near the Manitoba border. In 1928, Spruce Falls became the site of a dam and temporary power plant supplying the Island Falls hydroelectric power development upstream on the Churchill River.
The Swan River, about in length, is the outlet channel from Chicken Lake (also known as Barrier Lake) into Sisipuk Lake. Sisipuk Lake, also known as Duck Lake, is a large lake along the course of the Churchill River. Swan River has a drainage area of 700mi2 consisting of a number of lakes, chief among which are Chicken, Mari, and Kipahigan Lakes.
A large amount of power is required for construction purposes on a job the size of the Island Falls development. As steam and gasoline units could be used only to a minor extent, owing to the high cost of transporting fuel, the only alternative was to find a site where hydroelectric energy could be generated. Engineers for the Churchill River Power Company determined that Spruce Falls, about NaNmiles north-east of Island Falls, was suitable.
By utilizing the natural fall of 25feet at Spruce Falls in addition to a 15feet timber dam which impounded a small forebay, a head of 40feet was developed. Water from the head pond was conveyed to generator turbines by two wood stave pipes 7feet wide and 90feet long.
The Spruce Falls temporary powerhouse was a frame building on the shore of Sisipuk Lake. It contained two small generating units and complementary equipment. These two vertical-type turbines, with propeller-type runners, were directly connected to 1,000 kV⋅A generators delivering power at 600 volts, 3 phase, 60 cycles to a bank of transformers.
The transformer bank was placed apart from the powerhouse and protected by a lightning arrester and fuses. Rated at 2,000 kV⋅A, these transformers stepped the voltage up to 26,400 volts for transmission to Island Falls. There, a sub-station stepped the current down to 600 volts for two motor-generator sets which supplied current for the electric locomotives used in hauling earth, concrete and other construction materials.
Work on the temporary power plant was started on October 4, 1928. Its operation began on March 20, 1929, and continued without interruption until No. 1 Unit at Island Falls took up the load on June 5, 1930. Subsequently, the Spruce Falls plant was dismantled, and, under very difficult freighting conditions due to snow and weak ice, the two small generating units were brought to Island Falls, where they were permanently installed in 1933.
During the period of operation this plant supplied 4,698,000 kWh of electrical energy for construction purposes, at an average cost of 4.35 cents per kilowatt-hour.
Today, the dam at the site — known as Chicken Lake Dam — is owned and operated by the Saskatchewan Water Security Agency.[1]