| Model 1812 Musket | |
| Origin: | United States of America |
| Type: | Musket |
| Is Ranged: | yes |
| Service: | 1812–1865 |
| Used By: | United States, Confederate States of America |
| Wars: | Indian Wars |
| Designer: | ? |
| Design Date: | 1812 |
| Manufacturer: | United States Armory and Arsenal at Springfield |
| Production Date: | 1812–1816 |
| Number: | 60,000 |
| Weight: | 10lb |
| Length: | 58inches |
| Part Length: | 42inches |
| Cartridge: | Paper cartridge, musket ball (.65/16.510 mm) undersized to reduce the effects of powder fouling |
| Caliber: | .69 (17.526 mm) |
| Barrels: | Smoothbore |
| Action: | Flintlock |
| Rate: | User dependent; usually 2 to 3 rounds every 1 minute |
| Velocity: | 1000ft/s1200ft/s |
| Range: | 100 to 200 yards, in reality 50 to 75 yards |
| Max Range: | 300 yd (275 m)[1] |
| Feed: | Muzzle-loaded |
| Sights: | A front sight cast into the barrel band |
The Springfield Model 1812 Musket is a .69 caliber, flintlock musket manufactured by the Springfield Armory.
The War of 1812 revealed many weaknesses in the earlier Model 1795 Musket. The Model 1812 was an attempt to improve both the design and manufacturing process of the musket. The design borrowed heavily from the French Charleville model 1777 musket.[2] The Springfield Model 1812 musket arrived too late to be of use in the War of 1812 but would later become standard issue to regular infantry and militia units.[3]
The Model 1812 was a .69 caliber smoothbore musket, with a 42-inch (107 cm) barrel and a 54-inch (137 cm) stock, and a total length of 57-inch (145 cm). The Model 1812 was produced only at Springfield: the M1795 would continue in production at Harpers Ferry into 1818.[4]
The Model 1812 was produced in a quantity of almost 30,000 between the years 1814 and 1816. It was replaced by the Model 1816 Musket. However, the Model 1812 remained in service for many years, and was even used in the American Civil War, mostly by the Confederate forces. By the start of the Civil war, the weapon was considered to be old and obsolete but was needed to fill arms shortages.[5]
Some Model 1812 muskets were later converted to percussion lock firing mechanisms. The percussion cap system was much more reliable and weatherproof than the flintlock system used on the Model 1812 in its original configuration.