Having decided to build the large and expensive 40kn destroyer leaders, the Soviet Navy sought Italian assistance in designing smaller and cheaper destroyers. They licensed the plans for the and, in modifying it for their purposes, overloaded a design that was already somewhat marginally stable.[1]
The Gnevnys had an overall length of 112.8m (370.1feet), a beam of 10.2m (33.5feet), and a draft of 4.8m (15.7feet) at deep load. The ships were significantly overweight, almost 2000NaN0 heavier than designed, displacing 1612MT at standard load and 2039MT at deep load. Their crew numbered 197 officers and sailors in peacetime and 236 in wartime.[2] The ships had a pair of geared steam turbines, each driving one propeller, rated to produce 48000shp using steam from three water-tube boilers which was intended to give them a maximum speed of .[3] The designers had been conservative in rating the turbines and many, but not all, of the ships handily exceeded their designed speed during their sea trials. Others fell considerably short of it, although specific figures for most individual ships have not survived. Redky reached during her trials in 1942. Variations in fuel oil capacity meant that the range of the Gnevnys varied between 1670nmi3145nmi at . Redky herself demonstrated a range of 3040nmi at that speed.[4]
As built, the Gnevny-class ships mounted four 130adj=onNaNadj=on B-13 guns in two pairs of superfiring single mounts fore and aft of the superstructure. Anti-aircraft defense was provided by a pair of 76.2sp=usNaNsp=us 34-K AA guns in single mounts and a pair of 45mm 21-K AA guns[5] as well as two 12.7mm DK or DShK machine guns. They carried six torpedo tubes in two rotating triple mounts; each tube was provided with a reload. The ships could also carry a maximum of either 60 or 95 mines and 25 depth charges. They were fitted with a set of Mars hydrophones for anti-submarine work, although they were useless at speeds over .[6] The ships were equipped with two K-1 paravanes intended to destroy mines and a pair of depth-charge throwers.[7]
Major components for the ship that became Redky were laid down at Shipyard No. 198 (Andre Marti South) in Nikolayev on 28 September 1936 as yard number 328 and were then railed to Shipyard No. 199 at Komsomolsk-on-Amur, Siberia, for completion where the ship was laid down again on 17 November 1938 as Pylky. She was renamed Redky on 25 August 1940 and was launched on 28 September 1941 before she was commissioned on 29 November 1942.[8]