South West African Class Hc Explained

GSWA Class Hc 0-6-0T
South West African Class Hc 0-6-0T
South African Class Hc 0-6-0T
Powertype:Steam
Designer:Henschel & Son
Builder:Henschel & Son
Serialnumber:8334-8336, 10415, 10765, 19765
Buildmodel:Class Hc
Builddate:1907, 1910, 1911, 1923
Totalproduction:6
Uicclass:Cn2t
Driver:3rd coupled axle
Gauge: narrow
Coupleddiameter:NaN0NaN0
Over Couplers:17feet
Weightondrivers:10lt
Locoweight:10lt
Fueltype:Coal
Fuelcap:6600NaN0
Watercap:220sigfig=3NaNsigfig=3
Fireboxtype:Round-top
Firearea:4.8square feet
Boilerpressure:1710NaN0
Cylindercount:Two
Cylindersize:NaNinches bore
NaNinches stroke
Valvegear:Allan
Valvetype:Slide
Coupling:Buffers-and-chain
Tractiveeffort:4575lbf @ 75%
Operator:Otavi Mining and Railway Co.
South African Railways
Operatorclass:Class Hc
Numinclass:6
Fleetnumbers:81-84, 104, 106
Deliverydate:1907-1923
Firstrundate:1907

The South West African Class Hc 0-6-0T of 1907 was a narrow gauge steam locomotive from the German South West Africa era.

In 1907, the German Administration in German South West Africa acquired three Class Hc locomotives for lease to the Otavi Mining and Railway Company. Two more entered service in 1910 and 1911, and a sixth was acquired new by the South African Railways in 1923.[1] [2]

Manufacturer

Three 6001NaN1 narrow gauge steam locomotives were built by Henschel and Son in Germany in 1907 for the German Administration in German South West Africa (GSWA). Their works numbers were in the range from 8334 to 8336. The engines were designated Class Hc and numbered in the range from 81 to 83.[1] [2]

German South West Africa

The locomotives used Allan valve gear. Their small coal bunkers had a capacity of only 6600NaN0, while the water capacity of their side tanks was 220sigfig=3NaNsigfig=3.[1]

The "Hc" classification identified the type as the third class to have been built for GSWA by Henschel, probably excluding locomotives which were no longer in service by the time the First World War broke out. They were leased to the Otavi Mining and Railway Company who operated a narrow gauge railway across the Namib Desert between Swakopmund and Tsumeb.

In 1910 and 1911, two more Class Hc locomotives, no. 104 with works number 10415 and no. 106 with works number 10765, were delivered by Henschel for service on the Otavi Railway. They were employed as shunting locomotives at Otavi.[1] [2]

South African Railways

During the First World War, the former German Colony came under South African administration and the railways in GSWA came under control of the Union Defence Forces. Control of all railway operations in South West Africa (SWA) was passed on from the Military to the Director of Railways in Windhoek on 1 August 1915. On 1 April 1922, all the railway lines and rolling stock in the territory became part of the South African Railways (SAR).

None of the five pre-war Class Hc locomotives survived the war into the SAR era. In 1923, the SAR ordered a new one, no. 84, which was built to the same design by Henschel with works number 19765. This locomotive was not preserved and was presumably scrapped.[2]

Works numbers

The works numbers, years built and engine numbers of the Class Hc locomotives are listed in the table.[2]

Notes and References

  1. Espitalier, T.J.; Day, W.A.J. (1947). The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways (Continued). South African Railways and Harbours Magazine, December 1947. p. 1033.
  2. Henschel-Lieferliste (Henschel & Son works list), compiled by Dietmar Stresow