South African type XS tender explained

South African type XS tender
Locomotive:CSAR Superheated Mallet
Designer:American Locomotive Company
Builder:American Locomotive Company
Date:1911
Wheelarr:2-axle bogies
Length:26feet
Wheeldiameter:340NaN0
Wheelbase:17feet
Bogie:4feet
Axleload:13lt average
Bogieload:27lt each
Tenderempty:51248lb
Tenderworking:55lt
Fueltype:Coal
Fuelcap:101NaN1
Watercap:5000sigfig=3NaNsigfig=3
Stoking:Manual
Coupling:Drawbar & Johnston link-and-pin
Operator:Central South African Railways
South African Railways
Fleetnumbers:SAR 1619-1627

See main article: article and South African steam locomotive tenders.

The South African type XS tender was a steam locomotive tender from the pre-Union era in Transvaal.

Type XS tenders entered service in 1911, as tenders to the Superheated Mallet type steam locomotives which were acquired by the Central South African Railways in that year. These locomotives were designated Class MF on the South African Railways in 1912.[1] [2]

Manufacturer

Type XS tenders were built in 1911 by the American Locomotive Company (ALCO).[1] [2]

In 1911, the Central South African Railways (CSAR) placed nine Mallet articulated compound steam locomotives in service, built by ALCO. These locomotives were designated Class MF on the South African Railways (SAR) in 1912. The Type XS entered service as tenders to these engines.[1] [2]

Characteristics

The tender had a coal capacity of 101NaN1, a water capacity of 5000sigfig=3NaNsigfig=3 and an average maximum axle load of 13lt.[1] [2]

Locomotive

In the SAR years, tenders were numbered for the engines they were delivered with. In most cases, an oval number plate, bearing the engine number and often also the tender type, would be attached to the rear end of the tender. During the classification and renumbering of locomotives onto the SAR roster in 1912, no separate classification and renumbering list was published for tenders, which should have been renumbered according to the locomotive renumbering list.[2] [3]

Only the first batch of nine Class MF locomotives of 1911 were delivered new with Type XS tenders. In 1912, they were renumbered in the SAR number range from 1619 to 1627.[1] [2] [3]

Classification letters

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it could be coupled. The "X_" tenders could be used with the following locomotive classes:[2]

The second letter indicates the tender's water capacity. The "_S" tenders had a capacity of 5000impgal.[2]

Notes and References

  1. South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 43.
  2. South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 43.
  3. Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)