South African type XF1 tender | |
Designer: | South African Railways |
Builder: | South African Railways |
Date: | c. 1925 |
Wheelarr: | 2-axle bogies |
Length: | 22feet |
Bogies: | Diamond frame |
Wheeldiameter: | 340NaN0 |
Wheelbase: | 15feet |
Bogie: | 5feet |
Axleload: | 11lt |
Bogie 1: | 20lt |
Bogie 2: | 22lt |
Tenderempty: | 43136lb |
Tenderworking: | 42lt |
Fueltype: | Coal |
Fuelcap: | 101NaN1 |
Watercap: | 3000sigfig=3NaNsigfig=3 |
Stoking: | Manual |
Coupling: | Drawbar & Johnston link-and-pin Drawbar & AAR knuckle (1930s) |
Operator: | South African Railways |
Fleetnumbers: | SAR N37-N46 |
See main article: article and South African steam locomotive tenders.
The South African type XF1 tender was a steam locomotive tender.
Ten Type XF1 tenders were built as spare tenders by the South African Railways during the 1920s. They were apparently not allocated to or built for any particular class of locomotive, but were suitable for use with a wide variety of serving engines.[1] [2]
During the 1920s, ten Type XF1 tenders were built as spare tenders by the South African Railways (SAR).[1] [2]
These tenders had a modern appearance, with flush sides all the way to the top of the coal bunker. They were very similar in appearance to those Type XF tenders which had been rebuilt by the SAR by mounting a completely new upper structure on the existing underframes. They had the same water capacity of 3000sigfig=3NaNsigfig=3 and coal capacity of 101NaN1 as the Type XF, but rode on diamond frame bogies with a 120NaN0 longer wheelbase per bogie.[1] [2]
Tenders were usually numbered for the engines they were delivered with. The ten Type XF1 tenders were built as spare tenders, suitable for use with a wide variety of serving engines, and were therefore not numbered for specific engines but in the tender number range from N37 to N46. The "N" number prefixes usually indicated non-revenue earning vehicles.[1] [2]
Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it can be coupled. The "X_" tenders could be used with the following locomotive classes:[2]
The second letter indicates the tender's water capacity. The "_F" tenders had a capacity of 3000impgal.[2]
A number, when added after the letter code, indicates differences between similar tender types, such as function, wheelbase or coal bunker capacity.[2]