| South African Class S 0-8-0 | |
| Powertype: | Steam |
| Designer: | South African Railways (Col F.R. Collins DSO) |
| Builder: | Henschel and Son |
| Serialnumber: | 21071-21084 |
| Buildmodel: | Class S |
| Builddate: | 1928 |
| Totalproduction: | 14 |
| Whytetype: | 0-8-0 (Eight-coupled) |
| Uicclass: | Dh2 |
| Driver: | 3rd coupled axle |
| Coupleddiameter: | 480NaN0 |
| Tenderdiameter: | 340NaN0 |
| Wheelbase: | 48feet |
| Engine Total: | 14feet |
| Coupled: | 14feet |
| Tender Total: | 20feet |
| Tenderbogie: | 6feet |
| Over Couplers: | 64feet |
| Height: | 130NaN0 |
| Frametype: | Bar |
| Axleload: | 18sigfig=4NaNsigfig=4 |
| Coupled All: | 18sigfig=4NaNsigfig=4 |
| Tenderbogieload: | Bogie 1: 29lt Bogie 2: 31lt |
| Tenderaxle: | 15lt |
| Weightondrivers: | 72sigfig=4NaNsigfig=4 |
| Locoweight: | 72sigfig=4NaNsigfig=4 |
| Tenderweight: | 61lt |
| Locotenderweight: | 133lt |
| Tendertype: | GT (2-axle bogies) |
| Fueltype: | Coal |
| Fuelcap: | 81NaN1 |
| Watercap: | 6000sigfig=3NaNsigfig=3 |
| Fireboxtype: | Round-top |
| Firearea: | 41square feet |
| Pitch: | 8feet |
| Diameterinside: | 5feet |
| Lengthinside: | 140NaN0 |
| Smalltubediameter: | 135: 20NaN0 |
| Largetubediameter: | 28: tubes NaN0NaN0 |
| Boilerpressure: | 1700NaN0 |
| Safetyvalvetype: | Pop |
| Totalsurface: | 1699square feet |
| Tubearea: | 1554square feet |
| Archarea: | 20square feet |
| Fireboxarea: | 125square feet |
| Superheaterarea: | 450square feet |
| Cylindercount: | Two |
| Cylindersize: | NaN0NaN0 bore 250NaN0 stroke |
| Valvegear: | Walschaerts |
| Valvetype: | Piston |
| Coupling: | AAR knuckle |
| Tractiveeffort: | 35890lbf @ 75% |
| Operator: | South African Railways |
| Operatorclass: | Class S |
| Numinclass: | 14 |
| Fleetnumbers: | 360-373 |
| Deliverydate: | 1929 |
| Firstrundate: | 1929 |
| Withdrawndate: | 1976 |
| Notes: | The 3rd coupled axle had flangeless wheels |
The South African Railways Class S 0-8-0 of 1929 was a steam locomotive.
In 1929, the South African Railways placed fourteen purpose-built steam shunting locomotives with a 0-8-0 wheel arrangement in service.[1]
Throughout the history of railways in South Africa, shunting was traditionally performed by downgraded mainline locomotives. Considering the enormous amount of shunting performed, the number of dedicated shunting locomotives on the South African Railways (SAR) roster in the steam era was remarkably low, amounting to only 151 locomotives on a railway whose steam stock at one stage reached a maximum of nearly 2,800 locomotives.
When it did eventually introduce purpose-built shunting locomotives, the SAR preferred to adhere to the American practice of using tender locomotives for shunting rather than the European practice of using tank engines.
In spite of the conversion of Class A tank locomotives to Class 17 tank-and-tender shunting locomotives, increasing rail traffic throughout the country and particularly on the Witwatersrand in the 1920s still made it necessary to use heavy mainline locomotives for shunting work. Specifications for the Class S 0-8-0 tender type steam shunting locomotive were therefore prepared by Colonel F.R. Collins DSO, Chief Mechanical Engineer of the SAR.
In 1928, fourteen locomotives were built to the SAR specifications by Henschel and Son in Germany. They were delivered in 1929 and numbered in the range from 360 to 373. Since they were designed to operate at low speeds in tightly curved shunting yards, there was no need for the leading or trailing wheels which are necessary on mainline locomotives to improve high speed stability. In addition, it was desirable to have as large a proportion of the engine weight as possible carried on the coupled wheels to obtain the maximum adhesion possible.[1] [2] [3] [4]
The Class S locomotives were superheated, were built on bar frames and used Walschaerts valve gear with piston valves. They were delivered with Type GT tenders with a fuel capacity of 81NaN1, a water capacity of 6000sigfig=3NaNsigfig=3 and a maximum axle load of 15lt. To improve the crew's rearward vision, the top sides of the tender's coal bunker were set inwards and the water tank top was rounded.[1]
When they were first introduced, their boiler pressure was set at 2160NaN0, giving a tractive effort of 45500lbf at 75% boiler pressure. Since they tended to be slippery, however, the operating boiler pressure was reduced to 1700NaN0 in 1933, resulting in a corresponding reduction in tractive effort to 35890lbf at 75% boiler pressure.[1] [3] [4]
The Class S was initially placed in service in the Orange Free State and Natal, but they were soon transferred to Transvaal where they spent most of the rest of their working lives, rendering good service in yards at several centres. The Class ended up being mainly a Western Transvaal locomotive, stationed at Germiston, Kaserne, Krugersdorp, Springs and at Beaconsfield in Kimberley, with a solitary locomotive at Volksrust. The bulk of them spent all their working lives in Braamfontein.[5]
They were withdrawn from SAR service in 1976. Four were sold to Dunn's in 1977, from where they eventually ended up at several locations.