| South African Class MC1 2-6-6-0 | |
| Powertype: | Steam |
| Designer: | North British Locomotive Company |
| Builder: | North British Locomotive Company |
| Serialnumber: | 20442-20456 |
| Builddate: | 1913-1914 |
| Totalproduction: | 15 |
| Whytetype: | 2-6-6-0 (Denver) |
| Uicclass: | (1'C)Chv4 |
| Driver: | 3rd & 6th coupled axles |
| Leadingdiameter: | NaN0NaN0 |
| Coupleddiameter: | NaN0NaN0 |
| Tenderdiameter: | 340NaN0 |
| Wheelbase: | 600NaN0 |
| Engine Total: | 33feet |
| Coupled: | 8feet per unit |
| Tender Total: | 16feet |
| Tenderbogie: | 4feet |
| Over Couplers: | 68feet |
| Height: | 12feet |
| Axleload: | 16lt |
| Leadingbogie/Pony: | 7lt |
| Coupled 1: | 13lt |
| Coupled 2: | 15lt |
| Coupled 3: | 15lt |
| Coupled 4: | 14lt |
| Coupled 5: | 14lt |
| Coupled 6: | 16lt |
| Tenderbogieload: | Bogie 1: 27lt Bogie 2: 23lt |
| Tenderaxle: | 13lt |
| Weightondrivers: | 89lt |
| Locoweight: | 97lt |
| Tenderweight: | 51lt |
| Locotenderweight: | 148lt |
| Tendertype: | MP1 (2-axle bogies) |
| Fueltype: | Coal |
| Fuelcap: | 101NaN1 |
| Watercap: | 4250sigfig=3NaNsigfig=3 |
| Fireboxtype: | Round-top |
| Firearea: | 42.5square feet |
| Pitch: | 7feet |
| Diameterinside: | 5feet |
| Lengthinside: | 16feet |
| Smalltubediameter: | 152: NaN0NaN0 |
| Largetubediameter: | 27: NaN0NaN0 |
| Boilerpressure: | 2000NaN0 |
| Safetyvalvetype: | Ramsbottom |
| Totalsurface: | 2214square feet |
| Tubearea: | 2060square feet |
| Fireboxarea: | 154square feet |
| Superheaterarea: | 580square feet |
| Cylindercount: | Four |
| Hpcylindersize: | 180NaN0 bore 260NaN0 stroke |
| Lpcylindersize: | NaN0NaN0 bore 260NaN0 stroke |
| Valvegear: | Walschaerts |
| Valvetype: | HP Piston, LP Slide |
| Coupling: | Johnston link-and-pin |
| Tractiveeffort: | 46414lbf @ 50% |
| Operator: | South African Railways |
| Operatorclass: | Class MC1 |
| Numinclass: | 15 |
| Fleetnumbers: | 1634-1648 |
| Deliverydate: | 1914 |
| Firstrundate: | 1914 |
| Withdrawndate: | 1937 |
The South African Railways Class MC1 2-6-6-0 of 1914 was a steam locomotive.
In 1914 the South African Railways placed fifteen Class MC1 Mallet articulated compound steam locomotives with a 2-6-6-0 wheel arrangement in service.
Orders for an improved version of the Class MC were placed with the North British Locomotive Company in 1913. When the fifteen locomotives were delivered and placed in service in May 1914, they were designated Class MC1 and numbered in the range from 1634 to 1648.[1] [2]
The Class MC1 were duplicates of the Class MC in most respects, to the extent that the majority of spare parts for the two classes were interchangeable. Improvements consisted mainly of NaN0NaN0 larger diameter high-pressure and low-pressure cylinders and a redesigned boiler which included a superheater instead of the saturated steam boiler of the Class MC. The high-pressure cylinders of the hind engine unit were equipped with piston valves while the low-pressure cylinders of the front engine unit were equipped with slide valves.[1]
An externally obvious difference was the main steam pipes from the dome to the high-pressure cylinders, which was no longer arranged vertically down directly to the cylinders along the outside of the boiler, but internally via the superheater in the smokebox and from there along the underside of the running boards back to the cylinders. The result was a much better performing locomotive with an increased tractive effort brought about by the larger cylinders.[1]
The locomotives were delivered with Type MP1 tenders with a coal capacity of 101NaN1 and a water capacity of 4250sigfig=3NaNsigfig=3. The same tender was used by altogether sixteen locomotive classes, but those of the Class MC1 were fitted with a radial type of drawgear.[1]
When the coupled wheel tyres had to be renewed, the diameter of the wheels was increased from NaN0NaN0 to 460NaN0. This reduced the tractive effort from 464140NaN0 at 50% of boiler pressure to 459000NaN0. Unlike all other locomotive types where the SAR reported tractive effort at 75% of boiler pressure, it followed an ultra-conservative practice of reporting that of all Mallet locomotives at 50%.[1] [3]
The Class MC1 was placed in service on the coal line from Witbank to Germiston. In later years, some also saw service on the Natal mainline and the Cape Midland System. A number of them were transferred to the Cape Western System where they served as banking engines up the Hex River Railpass between De Doorns and Touws River.[3] [4]
The locomotives were all finally withdrawn from service and scrapped during 1937.[1]
The main picture shows driver Kok with his locomotive, c. 1930, while the following serve to illustrate both sides of the locomotive as well as the lined livery which was in use on the SAR when the locomotives were introduced.