| South African Class GCA 2-6-2+2-6-2 | |
| Hatnote: | ♠ First order - Second order |
| Powertype: | Steam |
| Designer: | South African Railways (Col F.R. Collins DSO) |
| Builder: | Friedrich Krupp AG |
| Serialnumber: | 970-982, 1042-1068 |
| Buildmodel: | Class GCA |
| Builddate: | 1927-1928 |
| Totalproduction: | 39 |
| Whytetype: | 2-6-2+2-6-2 (Double Prairie) |
| Uicclass: | 1'C1'+1'C1'h4t |
| Driver: | 3rd & 4th coupled axles |
| Leadingdiameter: | NaN0NaN0 |
| Coupleddiameter: | NaN0NaN0 |
| Trailingdiameter: | NaN0NaN0 |
| Wheelbase: | 56feet |
| Engine Total: | 17feet each |
| Coupled: | 80NaN0 each |
| Pivotcentres: | 29feet |
| Over Couplers: | 64feet |
| Height: | 12feet |
| Frametype: | Bar |
| Axleload: | ♠ 11lt 11lt |
| Leadingbogie/Pony: | ♠ 10lt front 10lt rear 10lt front 10lt rear |
| Coupled 1: | ♠ 10lt 10lt |
| Coupled 2: | ♠ 10lt 10lt |
| Coupled 3: | ♠ 10lt 10lt |
| Coupled 4: | ♠ 11lt 11lt |
| Coupled 5: | ♠ 11lt 11lt |
| Coupled 6: | ♠ 11lt 10lt |
| Trail Bogie/Pony: | ♠ 8lt front 8lt rear 8lt front 9lt rear |
| Weightondrivers: | ♠ 66lt 66lt |
| Locoweight: | ♠ 104lt 105lt |
| Fueltype: | Coal |
| Fuelcap: | 71NaN1 |
| Watercap: | 2000sigfig=3NaNsigfig=3 front 1000sigfig=3NaNsigfig=3 rear |
| Fireboxtype: | Round top |
| Firearea: | 34square feet |
| Pitch: | 7feet |
| Diameterinside: | 5feet |
| Lengthinside: | 11feet |
| Smalltubediameter: | 141: 20NaN0 |
| Largetubediameter: | 24: NaN0NaN0 |
| Boilerpressure: | 1800NaN0 |
| Safetyvalvetype: | Pop |
| Totalsurface: | 1388square feet |
| Tubearea: | 1225square feet |
| Archarea: | 21square feet |
| Fireboxarea: | 142square feet |
| Superheaterarea: | 331square feet |
| Cylindercount: | Four |
| Cylindersize: | 140NaN0 bore 230NaN0 stroke |
| Valvegear: | Heusinger |
| Valvetype: | Piston |
| Coupling: | AAR knuckle |
| Tractiveeffort: | 28470lbf @ 75% |
| Operator: | South African Railways |
| Operatorclass: | Class GCA |
| Numinclass: | 39 |
| Fleetnumbers: | 2190-2202, 2600-2625 |
| Deliverydate: | 1927-1928 |
| Firstrundate: | 1927 |
| Withdrawndate: | 1975 |
The South African Railways Class GCA 2-6-2+2-6-2 of 1927 was an articulated steam locomotive.
In 1927, the South African Railways placed thirteen Class GCA Garratt articulated steam locomotives with a Double Prairie type wheel arrangement in branch line service. Another batch of twenty-six locomotives was acquired in 1928.[1]
The Class GCA 2-6-2+2-6-2 Double Prairie type Garratt steam locomotive was built to the specifications and design of Colonel F.R. Collins DSO, Chief Mechanical Engineer of the South African Railways (SAR), based on the design of the Class GC Garratt. Thirteen locomotives were ordered from Friedrich Krupp AG of Essen in Germany, who delivered them during October 1927, numbered in the range from 2190 to 2202.[1] [2] [3]
A second order for another 26 locomotives was placed with the same manufacturer in 1928. These were numbered in the range from 2600 to 2625 when they were delivered during August in that same year.[2] [3]
The Class GCA had the same tractive effort and main dimensions as the Class GC, but was built on bar frames instead of plate frames. They also differed in general appearance by having round-topped fireboxes, compared to the Belpaire fireboxes of the Class GC, and with water tanks and built-up coal bunkers of a different shape. The second batch of locomotives differed slightly from the first and were 1lt heavier. Like the predecessor Class GC, they were all superheated and had Walschaerts valve gear.
The Class GCA proved to be good locomotives, although some trouble was experienced with coupling rods breaking, much of which was attributed to running them at excessive speed to maintain schedules with their small coupled wheel diameter of only NaN0NaN0.[1]
Experience showed that the performance of these locomotives could have been better if they had been fitted with somewhat larger cylinders since their boilers still had an appreciable margin of capacity.[1]
The first batch of locomotives were placed in service on the Natal South Coast line and shedded at Greyville, while the second batch were distributed wherever their services were required. These could be found working around Pietermaritzburg on the Donnybrook to Underberg and Greytown to Mount Alida branch lines, while some ended up at Nelspruit in the Eastern Transvaal Lowveld for service on the Graskop branch line. They were even tested on the South West Africa System.[1] [4]
By October 1971, after more than four decades of service, all Greyville's Class GCAs had been withdrawn since they were no longer needed after completion of the South Coast line’s electrification. By 1973, the thirty-nine original members of the Class had dwindled to seven, all stationed at Mason's Mill in Pietermaritzburg, from where they still worked the light rail Underberg branch, often double-heading. By April of that year, however, the number had dropped to five. They were all withdrawn from service in October 1975. One of their last tasks was to work the track re-railing train which laid the heavier rails which enabled diesel-electric locomotives to finally replace them.[5]
In 1927, the SAR began to convert the couplers of its Cape Gauge rolling stock from the Johnston link-and-pin coupling system which had been in use since the establishment of the Cape Government Railways in 1873, to AAR knuckle couplers. Judging from contemporary photographs as well as the official SAR Locomotive Diagram Book and the dimensional locomotive drawings as published by Holland, which were for the most part based on the original as-delivered and unmodified locomotives, the Class GCA locomotives were delivered new with knuckle couplers fitted, as were the Classes 18, GF, HF and U which also entered service in 1927.[2] [3]
Conversion of all rolling stock would take several years and both coupler types could still be seen on rolling stock into the late 1950s. During the transition period, knuckle couplers on locomotives had a horizontal gap and a vertical hole in the knuckle itself to accommodate a link and a pin respectively. This enabled them to couple to vehicles which were still equipped with the older Johnston couplers.[2] [3]
Knuckle couplers had first been used in South Africa more than two decades earlier. The Central South African Railways (CSAR) introduced Gould knuckle couplers on the rolling stock of its Limited Express and Imperial Mail passenger trains in 1904. The Limited Express operated between Pretoria and Johannesburg while the Imperial Mail operated between Pretoria and Cape Town. These knuckle-couplers also had split knuckles to accommodate coupling to the old Johnston couplers with a link and pin, since the CSAR retained the old couplers on all their locomotives to keep them compatible with their own goods and older passenger rolling stock as well as with that from the other railways it connected with.[6]
| Number | Works nmr | THF / Private | Leaselend / Owner | Current Location | Outside South Africa | ? | |
|---|---|---|---|---|---|---|---|
| 2196 | THF | White River Station | |||||
| 2199 | THF | Krugersdorp Locomotive Depot | |||||
| 2621 | THF | Ingwe Municipality | Creighton Station |