| South African Class ES | |
| Hatnote: | ♠ Series 1 & 2 – Series 3 & 4 |
| Powertype: | Electric |
| Designer: | South African Railways (A.G. Watson) |
| Builder: | South African Railways Werkspoor |
| Serialnumber: | Werkspoor 737-746, 913-924 & 1053-1054, SLM 3662 |
| Buildmodel: | SAR ES |
| Builddate: | 1936–1964 |
| Totalproduction: | 28 |
| Aarwheels: | B-B |
| Uicclass: | Bo+Bo |
| Britishclass: | Bo+Bo |
| Wheeldiameter: | 12191NaN1 |
| Minimumcurve: | 91.450NaN0 |
| Wheelbase: | 94231NaN1 |
| Bogie: | 28191NaN1 |
| Pivotcentres: | 66041NaN1 |
| Over Couplers: | 133101NaN1 |
| Width: | 28001NaN1 |
| Pantodown: | ♠ 38591NaN1 40261NaN1 |
| Bodyonly: | ♠ 34781NaN1 36181NaN1 |
| Axleload: | 17018kg (37,518lb) |
| Locoweight: | 68075kg (150,080lb) |
| Electricsystem: | 3 kV DC catenary |
| Tractionmotors: | Four MV 182R |
| T/M Amps 1 Hr: | 224kW |
| Gear Ratio: | 17:75 |
| Trainbrakes: | Air & Vacuum |
| Coupling: | AAR knuckle |
| Maxspeed: | 40km/h |
| Poweroutput: | 896kW |
| T/E Starting: | 176kN |
| T/E 1 Hr: | 94kN |
| T/E Continuous: | 73kN |
| Operator: | South African Railways Driefontein GM |
| Operatorclass: | Class ES |
| Numinclass: | 28 |
| Fleetnumbers: | SAR E500-E501 (ex E96-E97), E503-E512 (ex E124-E133), E515-E526, Driefontein 1-4 |
| Nicknames: | Studebaker |
| Deliverydate: | 1936–1964 |
| Firstrundate: | 1936 |
| Withdrawndate: | c. 1983 |
The South African Railways Class ES of 1936 was an electric locomotive.
In 1936, the South African Railways built two Class ES centre-cab electric shunting locomotives with a Bo+Bo wheel arrangement, based on the Class 1E mainline electric locomotive. Between then and 1964, more were acquired until a total of 24 Class ES locomotives were eventually in service. Four more were built new for industry in 1952 and 1957.[1] [2] [3]
The Class ES was the fourth locomotive type to be designed and built in South Africa, after the Natal Government Railways 4-6-2TT Havelock of 1888, the Class 2C of 1910 and the Class 20 of 1935.[2]
During 1935, it was decided to replace steam shunting locomotives with electric shunting units at Daimana (Danskraal) in Ladysmith. A design for a centre-cab electric shunting locomotive, based on the Class 1E mainline locomotive which was originally designed by Metropolitan-Vickers (Metrovick), was prepared by A.G. Watson, Chief Mechanical Engineer of the South African Railways (SAR) from 1929 to 1936, in collaboration with the SAR Electrical Department.[1] [2] [4]
The first two Class ES locomotives were built new in Pietermaritzburg, where the bodywork was constructed in the SAR workshops. Two sets of spare Class 1E power bogies, complete with traction motors and gearing, were used. The wiring, control equipment and auxiliary machinery were installed at Daimana. These two units were initially numbered E96 and E97, but they were later renumbered to E500 and E501. They entered service at Daimana in 1936 as South Africa's first purpose-built electric shunting locomotives.[1] [2]
Even though it was not wholly a South African product with its imported Class 1E spare parts, the Class ES was the fourth recorded instance of locomotives designed and constructed in South African workshops, after the Natal Government Railways' engine Havelock of 1888, the Class 2C of 1910 and the Class 20 of 1935.[1] [2] [5] [6] [7]
Over the next 28 years, more of these locomotives were built and by 1964 24 Class ES locomotives had been placed in service by the SAR. As can be expected in a locomotive type which was built by different manufacturers over a period of almost three decades, there are differences in appearance between locomotives.
Two batches of ten were built by the Nederlandsche Fabriek van Werktuigen en Spoorwegmaterieel (Werkspoor).
Series 4, numbers E525 and E526, the last two, were rebuilt from Class 1E locomotives in the SAR shops in 1964.
In 1952, two Class ES locomotives were built new for the Driefontein Consolidated Gold Mine (Dries) by Werkspoor, numbered 1 and 2. Another two were delivered new to the mine in 1957, numbered 3 and 4, also built by Werkspoor.
The locomotive body had three main sections. For the convenience of the driver and to afford him better outside vision, the cab was placed in the middle of the body, with the hoods of the machinery compartments tapering downwards from the cab. The "S" in the locomotive's class designation identifies it as a shunting locomotive, designed for and usually limited to yard work.[1] [3]
With a maximum safe speed of 400NaN0, they ran on an overhead power supply of . Their traction motors, connected in series on each bogie, operated on 1.5 kV DC.[8]
Although the class ES was initially largely confined to service in Natal, members of the class became quite common working on the Western Transvaal System in later years, mainly being employed around the Witwatersrand. Beginning in 1983, they were eventually replaced by the Class 8E, also a centre-cab shunting locomotive.
The locomotives were known by enginemen as Studebakers since the two long hoods either side of the cab were likened to a 1947 Studebaker Commander Business Coupe.[9]
No. E511 is stored at Millsite Locomotive Depot in Krugersdorp awaiting possible restoration.
The builders, works numbers, years built and renumbering of the Class ES are listed in the table below.
Series | Builder | Works no. | Year | Old no. | New no. | Notes | |
|---|---|---|---|---|---|---|---|
| 1 | SAR | 1935 | E96 | E500 | |||
| 1 | SAR | 1935 | E97 | E501 | |||
| 2 | Werkspoor | 737 | 1937 | E124 | E503 | ||
| 2 | Werkspoor | 738 | 1937 | E125 | E504 | ||
| 2 | Werkspoor | 739 | 1937 | E126 | E505 | ||
| 2 | Werkspoor | 740 | 1937 | E127 | E506 | ||
| 2 | Werkspoor | 741 | 1937 | E128 | E507 | ||
| 2 | Werkspoor | 742 | 1937 | E129 | E508 | ||
| 2 | Werkspoor | 743 | 1937 | E130 | E509 | ||
| 2 | Werkspoor | 744 | 1937 | E131 | E510 | ||
| 2 | Werkspoor | 745 | 1937 | E132 | E511 | ||
| 2 | Werkspoor | 746 | 1937 | E133 | E512 | ||
| 3 | Werkspoor | 913 | 1951 | E515 | |||
| 3 | Werkspoor | 914 | 1951 | E516 | |||
| 3 | Werkspoor | 915 | 1951 | E517 | |||
| 3 | Werkspoor | 916 | 1951 | E518 | |||
| 3 | Werkspoor | 917 | 1951 | E519 | |||
| 3 | Werkspoor | 918 | 1951 | E520 | |||
| 3 | Werkspoor | 919 | 1951 | E521 | |||
| 3 | Werkspoor | 920 | 1951 | E522 | |||
| 3 | Werkspoor | 921 | 1951 | E523 | |||
| 3 | Werkspoor | 922 | 1951 | E524 | |||
| 3 | Werkspoor | 923 | 1952 | 1 | Dries GM | ||
| 3 | Werkspoor | 924 | 1952 | 2 | Dries GM | ||
| 3 | Werkspoor | 1053 | 1957 | 3 | Dries GM | ||
| 3 | Werkspoor | 1054 | 1957 | 4 | Dries GM | ||
| 4 | Metrovick | 1964 | E114 | E525 | 1E rebuilt | ||
| 4 | SLM | 3662 | 1964 | E146 | E526 | 1E rebuilt |
The main picture shows one of the first two Class ES locomotives to be built, c. 1936. Until the 1960s, they had a bottle green livery with red buffer beams. Some of the liveries which were applied to Class ES locomotives are illustrated below.