South African Class 4 4-8-2 Explained

CGR Mountain 4-8-2
South African Class 4 4-8-2
Powertype:Steam
Designer:Cape Government Railways
(H.M. Beatty)
Builder:North British Locomotive Company
Serialnumber:19242-19243
Buildmodel:CGR 4-8-2
Builddate:1911
Totalproduction:2
Whytetype:4-8-2 (Mountain)
Uicclass:2'D1'n2
Driver:2nd coupled axle
Leadingdiameter:NaN0NaN0
Coupleddiameter:540NaN0
Trailingdiameter:330NaN0
Tenderdiameter:NaN0NaN0 as built
340NaN0 retyred
Wheelbase:57feet
Engine Total:31feet
Leading:6feet
Coupled:14feet
Tender Total:16feet
Tenderbogie:4feet
Wheelspacing:1-2: 4feet
2-3: 4feet
3-4: 4feet
Over Couplers:65feet
Height:12feet
Frametype:Bar
Axleload:15sigfig=4NaNsigfig=4
Leadingbogie/Pony:11lt
Coupled 1:14lt
Coupled 2:14lt
Coupled 3:14lt
Coupled 4:15sigfig=4NaNsigfig=4
Tenderbogieload:Bogie 1: 21lt
Bogie 2: 21lt
Tenderaxle:10lt
Weightondrivers:59lt
Locoweight:82lt
Tenderweight:43lt
Locotenderweight:125lt
Tendertype:XJ (2-axle bogies)
Fueltype:Coal
Fuelcap:6lt
Watercap:3500sigfig=3NaNsigfig=3
Fireboxtype:Round-top, combustion chamber
Firearea:37square feet
Pitch:7feet
Diameterinside:5feet
Lengthinside:180NaN0
Smalltubediameter:201: NaN0NaN0
Boilerpressure:1800NaN0
Safetyvalvetype:Ramsbottom (No. 850/1477)
Cole's Pop (No. 851/1478)
Totalsurface:2317square feet
Tubearea:2131square feet
Fireboxarea:186square feet
Cylindercount:Two
Cylindersize:NaN0NaN0 bore
280NaN0 stroke
Valvegear:Stephenson
Valvetype:Murdoch's D slide
Coupling:Johnston link-and-pin
Tractiveeffort:29420lbf @ 75%
Operator:Cape Government Railways
South African Railways
Operatorclass:SAR Class 4
Numinclass:2
Fleetnumbers:CGR 850-851
SAR 1477-1478
Deliverydate:1911
Firstrundate:1911
Withdrawndate:1938
Notes:The leading coupled axle had flangeless wheels

The South African Railways Class 4 4-8-2 of 1911 was a steam locomotive from the pre-Union era in the Cape of Good Hope.

In 1911, the Cape Government Railways placed two steam locomotives with a Mountain type wheel arrangement in service. They were renumbered and designated Class 4 when they were assimilated into the South African Railways a year later.[1] [2]

Manufacturer

The first Mountain type locomotive of the Cape Government Railways (CGR) was designed as a heavy mixed traffic engine at the Salt River shops by H.M. Beatty, the Chief Locomotive Superintendent of the CGR from 1896 to 1910. Two locomotives were built by the North British Locomotive Company (NBL) and delivered in March 1911.

Characteristics

The locomotives were a further development of the two experimental locomotives which had been placed in service by the CGR in 1906, the CGR Class 9 (SAR Class Experimental 5) and the CGR Class 10 (SAR Class Experimental 6), both built by Kitson and Company.

The Class 4 locomotives had NaN0NaN0 thick bar frames, Stephenson valve gear with flat "D" slide valves arranged above the cylinders, and used saturated steam. The boiler was equipped with a combustion chamber which was carried forward 20NaN0 from the firebox into the boiler barrel, of which the diameter was increased at the hind course to suit. This reduced the distance between the tube plates to 180NaN0 and made them excellent steamers.[1]

They were numbered 850 and 851 in the CGR numbering sequence, but were not designated a classification. The two engines were not identical, no. 850 being equipped with the usual Ramsbottom safety valves while no. 851 had Cole’s muffled type Pop safety valves, both set to open at 1800NaN0 boiler pressure. They were delivered with Type XJ tenders with a 6lt coal and a 3500sigfig=3NaNsigfig=3 water capacity.[1] [3]

South African Railways

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, with Sir William Hoy appointed as its first General Manager, the actual classification and renum­bering of all the rolling stock of the three constituent railways were only implemented with effect from 1 January 1912.[2] [4]

In 1912, these two locomotives were renumbered to 1477 and 1478 and designated Class 4 on the SAR.[2]

Service

Both locomotives were placed in service in the Karoo, working between Touws River and Beaufort West. In their later years they were stationed at Worcester, from where they were used extensively on and around the Cape Western system’s mainline, working pick-up goods trains to De Doorns in the Hex River valley and on the Mosselbaai line via Robertson.

They were withdrawn from service by 1938.

Illustration

The main picture shows SAR no. 1478 at Worcester, c. 1930, with Cole's Pop safety valves.

Notes and References

  1. Espitalier, T.J.; Day, W.A.J. (1945). The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways. South African Railways and Harbours Magazine, April 1945. p. 275.
  2. Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912, pp. 8, 12, 15, 46 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  3. North British Locomotive Company works list, compiled by Austrian locomotive historian Bernhard Schmeiser
  4. The South African Railways - Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.