| South African Class 4A & 4AR 4-8-2 | |
| Hatnote: | ♠ Class 4A as built with a round-topped firebox Class 4AR rebuilt with a Watson Standard boiler Steel firebox - Copper firebox |
| Powertype: | Steam |
| Designer: | Cape Government Railways (H.M. Beatty) |
| Builder: | North British Locomotive Company |
| Serialnumber: | 20225-20234 |
| Buildmodel: | CGR 4-8-2 |
| Builddate: | 1913 |
| Totalproduction: | 10 |
| Whytetype: | 4-8-2 (Mountain) |
| Uicclass: | 2'D1'h2 |
| Driver: | 2nd coupled axle |
| Leadingdiameter: | NaN0NaN0 |
| Coupleddiameter: | 540NaN0 |
| Trailingdiameter: | 330NaN0 |
| Tenderdiameter: | NaN0NaN0 as built 340NaN0 retyred |
| Wheelbase: | 58feet |
| Engine Total: | 32feet |
| Leading: | 6feet |
| Coupled: | 14feet |
| Tender Total: | 16feet |
| Tenderbogie: | 4feet |
| Wheelspacing: | 1-2: 4feet 2-3: 4feet 3-4: 4feet |
| Over Couplers: | 66feet |
| Height: | ♠ 12feet 12feet |
| Frametype: | Bar |
| Axleload: | ♠ 15lt 14lt |
| Leadingbogie/Pony: | ♠ 12sigfig=4NaNsigfig=4 13lt |
| Coupled 1: | ♠ 15lt 14lt |
| Coupled 2: | ♠ 15lt 14lt |
| Coupled 3: | ♠ 15lt 14lt |
| Coupled 4: | ♠ 15lt 14lt |
| Trail Bogie/Pony: | ♠ 11lt 10lt |
| Tenderbogieload: | Bogie 1: 23lt Bogie 2: 23lt |
| Tenderaxle: | 11lt |
| Weightondrivers: | ♠ 61lt 57lt |
| Locoweight: | ♠ 85lt 81lt |
| Tenderweight: | 47lt |
| Locotenderweight: | ♠ 132lt 128lt |
| Tendertype: | XM (2-axle bogies) XC, XC1, XD, XE, XE1, XF, XF1, XF2, XJ, XM, XM1, XM2, XM3, XM4, XP1, XS permitted |
| Fueltype: | Coal |
| Fuelcap: | 81NaN1 |
| Watercap: | 4000sigfig=3NaNsigfig=3 |
| Fireboxtype: | Round-top, combustion chamber |
| Firearea: | ♠ 37square feet |
| Boiler: | Watson Standard no. 2 |
| Pitch: | ♠ 7feet 80NaN0 |
| Diameterinside: | ♠ 5feet 5feet |
| Lengthinside: | ♠ 18feet 19feet 19feet |
| Smalltubediameter: | ♠ 144: NaN0NaN0 81: NaN0NaN0 |
| Largetubediameter: | ♠ 22: NaN0NaN0 30: NaN0NaN0 |
| Boilerpressure: | 1800NaN0 |
| Safetyvalvetype: | Cole's Pop |
| Totalsurface: | ♠ 2292square feet 2075square feet |
| Tubearea: | ♠ 2106square feet 1933square feet |
| Fireboxarea: | ♠ 186square feet 142square feet |
| Superheaterarea: | ♠ 554square feet 497square feet |
| Cylindercount: | Two |
| Cylindersize: | NaN0NaN0 bore 280NaN0 stroke |
| Valvegear: | Walschaerts |
| Valvetype: | Piston |
| Coupling: | Johnston link-and-pin AAR knuckle (1930s) |
| Tractiveeffort: | ♠ 32360lbf @ 75% |
| Operator: | South African Railways |
| Operatorclass: | Class 4A, Class 4AR |
| Numinclass: | 10 |
| Fleetnumbers: | 1551-1560 |
| Deliverydate: | 1913-1914 |
| Firstrundate: | 1913 |
| Withdrawndate: | 1974 |
| Notes: | The leading coupled axle had flangeless wheels |
The South African Railways Class 4A 4-8-2 of 1913 was a steam locomotive.
In 1913 and 1914, ten Class 4A steam locomotives with a 4-8-2 Mountain type wheel arrangement were placed in service by the South African Railways.[1]
The Class 4 Mountain type locomotive was designed at the Salt River shops as a heavy mixed traffic locomotive by H.M. Beatty, the last Chief Locomotive Superintendent of the Cape Government Railways (CGR).[1]
Soon after the South African Railways (SAR) locomotive renumbering and classification scheme was carried out in 1912, an order was placed with North British Locomotive Company for a further ten locomotives of this type, built to an altered design. They were delivered late in 1913 and were designated Class 4A, numbered in the range from 1551 to 1560.[1] [2]
The Class 4A locomotive was an improved version of the predecessor . It had a superheater added, which further resulted in the slide valves and Stephenson valve gear having to be replaced with piston valves and Walschaerts valve gear. The boilers were similar to those of the Class 4, except for the superheater and the length between tube-plates, which was 30NaN0 longer. The bar frames were identical to that of the Class 4, but the cylinders were of a 10NaN0 larger bore. The engines were erected at the Salt River shops in Cape Town during November 1913. Like their two forerunners, they were excellent steamers and, with the design alterations, gave a much better performance.[1]
The Class 4A were the only locomotives to be delivered with Type XM tenders, which had a coal capacity of 81NaN1 and a water capacity of 4000sigfig=3NaNsigfig=3.[3] [4]
The locomotive was the prototype for the Rhodesia Railways 10th Class, a scaled-down version that, like the Class 4A, gave long service.[5]
In the 1930s, many serving locomotives were reboilered with a standard boiler type designed by then Chief Mechanical Engineer A.G. Watson as part of his standardisation policy. Such Watson Standard reboilered locomotives were reclassified by adding an "R" suffix to their classification.[3] [4]
All ten Class 4A locomotives were reboilered with Watson Standard no. 2 boilers during 1935 and reclassified to Class 4AR. No. 1554 was the first to be so modified and retained its original cab, which was cut back to accommodate the new boiler and wash-out plugs. It also initially retained its original cowcatcher. The other nine locomotives all had new Watson cabs fitted during reboilering, with their distinctive slanted fronts compared to the conventional vertical fronts of their original cabs.[1] [6]
The new boiler's pitch was 60NaN0 higher than on the Class 4A. In the process the locomotives underwent some additional modifications. The trailing bissel truck remained unaltered, but the side control was redesigned and spring compensation was extended to include the bissel. This was one of the rare instances where reboilering actually appreciably reduced the total weight of the engine, from 85lt to 81lt.[1] [3] [4]
An obvious visual difference between an original and a Watson Standard reboilered locomotive is usually a rectangular regulator cover, just to the rear of the chimney on the reboilered locomotive, but this was not always the case, as illustrated. A more obvious difference in the case of the Class 4AR is the top-fed feedwater supply to the boiler.[3] [4]
Their first ten years of service were spent working both passenger and goods trains on various sections of the Cape mainline. At first they worked out of Cape Town, but when more powerful locomotives became available, they were transferred to the Karoo, working between Touws River and Kimberley and also northward from Kimberley to Mafeking. They were then transferred to the Reef, from where they regularly served on the Zeerust, Breyten and Volksrust lines while also being employed in a variety of suburban and local train workings.
During the Second World War, Class 4A no. 1554 was equipped with temporary protective armour to serve as the locomotive of an armoured train. The locomotive and train were stationed at Mapleton Camp of the Union Defence Force, where the SAR&H Brigade trained before going north to the Middle East.[7]
Armoured boiler cladding was added. The cab, front and sides of the smokebox were enclosed and some fittings on top of the boiler and firebox such as the safety valves and top feed were boxed in armour. Armour plating was also fitted to the sides of the running boards. The picture shows the locomotive and armoured train being inspected during 1942 by the Honourable F.C. Sturrock MP, South Africa's Minister of Transport at the time.[7]
The last Class 4AR locomotive was withdrawn from shunting operations on the West Rand in 1974 after more than 60 years in service. Some remained working in industrial service for several more years, with the last one being finally retired from Apex Colliery in 1983.[5]
A lighter version of the Class 4A was built by NBL for the Rhodesia Railways (RR). It was designated the RR 10th Class and was used on the long section south from Bulawayo in Southern Rhodesia through Bechuanaland Protectorate to Mafeking in the Cape Province.[5]
Like the SAR Class 4A, the RR 10th Class had combustion chambers, the only RR locomotive class with this feature.
Two of these engines survive.
| Number | Works nmr | THF / Private | Leaselend / Owner | Current Location | Outside South Africa | ? | |
|---|---|---|---|---|---|---|---|
| 1555 | NBL / 20229 | THF | MUSEUM | Bloemfontein Locomotive Depot | |||
| 1560 | NBL / 20233 | THF | Queenstown Locomotive Depot |
The main picture shows no. 1559, as built, on the Cape Town-Johannesburg train, taking water at Hutchinson in the Karoo on 11 November 1916.
In the pictures of reboilered Class 4AR locomotives, one locomotive has the rectangular regulator cover just to the rear of the chimney, while the other, no. 1554, has a bolted on cover plate instead, flush with the boiler cladding. Both have Watson cabs, while the pictures of Class 4A locomotives show their original cabs with conventional vertical fronts.[3] [4]