| South African Class 16E 4-6-2 | |
| Powertype: | Steam |
| Designer: | South African Railways (A.G. Watson) |
| Builder: | Henschel and Son |
| Serialnumber: | 22583-22588 |
| Buildmodel: | Class 16E |
| Builddate: | 1935 |
| Totalproduction: | 6 |
| Whytetype: | 4-6-2 (Pacific) |
| Uicclass: | 2'C1'h2 |
| Driver: | 2nd coupled axle |
| Leadingdiameter: | 340NaN0 |
| Coupleddiameter: | 720NaN0 |
| Trailingdiameter: | 340NaN0 |
| Tenderdiameter: | 340NaN0 |
| Wheelbase: | 63feet |
| Engine Total: | 33feet |
| Leading: | 7feet |
| Coupled: | 12feet |
| Tender Total: | 20feet |
| Tenderbogie: | 6feet |
| Over Couplers: | 71feet |
| Height: | 130NaN0 |
| Frametype: | Bar |
| Axleload: | 20lt |
| Leadingbogie/Pony: | 19lt |
| Coupled 1: | 19lt |
| Coupled 2: | 20lt |
| Coupled 3: | 19lt |
| Trail Bogie/Pony: | 18lt |
| Tenderbogieload: | Bogie 1: 33lt Bogie 2: 35lt |
| Tenderaxle: | 17lt |
| Weightondrivers: | 59lt |
| Locoweight: | 97lt |
| Tenderweight: | 69lt |
| Locotenderweight: | 167lt |
| Tendertype: | JT (2-axle bogies) JT, JV permitted |
| Fueltype: | Coal |
| Fuelcap: | 141NaN1 |
| Watercap: | 6000sigfig=3NaNsigfig=3 |
| Fireboxtype: | Round-top |
| Firearea: | 63square feet |
| Boiler: | Watson Standard no. 3A |
| Boilertype: | Domeless |
| Pitch: | 9feet |
| Diameterinside: | 6feet |
| Lengthinside: | 19feet |
| Smalltubediameter: | 136: NaN0NaN0 |
| Largetubediameter: | 36: NaN0NaN0 |
| Boilerpressure: | 2100NaN0 |
| Safetyvalvetype: | Pop |
| Totalsurface: | 2914square feet |
| Tubearea: | 2682square feet |
| Archarea: | 26square feet |
| Fireboxarea: | 206square feet |
| Superheaterarea: | 592square feet |
| Cylindercount: | Two |
| Cylindersize: | 240NaN0 bore 280NaN0 stroke |
| Valvegear: | Rotary cam |
| Valvetype: | Poppet |
| Coupling: | AAR knuckle |
| Maxspeed: | 136km (85miles) when pulling a 350-ton train |
| Tractiveeffort: | 35280lbf @ 75% |
| Operator: | South African Railways |
| Operatorclass: | Class 16E |
| Numinclass: | 6 |
| Fleetnumbers: | 854–859 |
| Deliverydate: | 1935 |
| Firstrundate: | 1935 |
| Withdrawndate: | 1972 |
| Notes: | The 2nd coupled axle had flangeless wheels |
The South African Railways Class 16E 4-6-2 of 1935 is a class of passenger steam locomotive.
In 1935, the South African Railways placed six Class 16E steam locomotives with a Pacific type wheel arrangement in express passenger train service.[1]
Following the Great Depression in South Africa of 1930-1933, the South African Railways (SAR) set out to improve its Cape Town-Johannesburg express passenger service. To attain higher average speeds for its more important express trains, the Class 16E 4-6-2 Pacific type locomotive was designed by A.G. Watson, Chief Mechanical Engineer of the SAR from 1929 to 1936, specifically for use with the Union Express and the Union Limited trains. Six locomotives were built by Henschel and Son in Kassel, Germany and delivered in 1935, numbered in the range from 854 to 859.[1] [2]
With its 72abbr=offNaNabbr=off diameter coupled wheels, the Class 16E was considered the most remarkable Cape gauge express passenger locomotive ever built. It had the largest fire grate on any Pacific outside North America. The coupled wheels were the largest ever used on any less than 4feet standard gauge locomotive and it had an all-up weight and tractive effort equal to or exceeding that of most Pacifics outside North America.[1]
Watson experienced considerable difficulty to keep the axle loads within the permissible limits specified by the Chief Civil Engineer, with the result that the ashpan, cab, side running boards and several other parts were made of thinner material than usual. Even the original number plates were cast in aluminium. Still, the axle load of 20lt was the heaviest of any engine or vehicle on the SAR at the time.[1]
Along with the Class 15E Mountain type of 1935, the locomotive introduced the Type JT tender with a coal capacity of 141NaN1, a water capacity of 6000sigfig=3NaNsigfig=3 and an axle load of 17lt.[1]
The main bar frames were machined from rolled steel slabs and each frame was in one piece from the front to the hind buffer beam. The wheels were fitted with hollow crank pins, while the leading bogie was fitted with an oil bath centre pivot. The connecting and coupling rods were fitted with floating bronze bushes and were made of special chrome-nickel alloy steel of fluted section. The centre driving set of coupled wheels were flangeless and had wider treads than the other two sets to prevent them from slipping off the rails in sharp curves.[1]
To obtain increased tractive effort with the large coupled wheels, larger cylinders of 240NaN0 bore by 280NaN0 stroke were used. These, at a boiler pressure of 2100NaN0, gave the locomotive a tractive effort of 35280lbf at 75% of boiler pressure. Each cylinder was cast integral with half of the smokebox saddle, which made the castings interchangeable.[1]
Given the successful operation of rotary cam poppet valve gear on the Class 19C, it was also used on the Class 16E. The valves were driven by outside rotary propshafts from turning mechanisms mounted on the driving coupled wheels. The valves were double-seated and housed at each end of the cylinders, an arrangement that resulted in short and straight ports between the valves and the cylinder barrels. The admission valves were 80NaN0 in diameter and the exhaust valves 90NaN0. Most of the detail parts of the rotary cam gear, particularly the main drive and reversing gear, were interchangeable with similar parts on the Class 19C. The poppet valve gear gave the engine extremely free-running characteristics.[1]
The Class 16E was delivered with a Watson Standard no. 3A boiler, one of the range of standard boiler types designed by Watson as part of his standardisation policy. The boiler was designed for a maximum working pressure of 2250NaN0 and the boiler barrel plates and firebox outer shell were of nickel steel. The boiler and the firebox were entirely clothed with Alfol insulation.[1]
At 9feet above rail level, the Class 16E boiler centre-line was the highest-pitched on the SAR at the time. Because of this and the limitations of the loading gauge, the boiler was domeless with an inspection manhole on top of the boiler barrel where the dome would have been. Steam was collected through numerous small feeder pipes fixed into two collector pipes which were arranged as high as possible above the water surface. The collector pipes then joined together to form a main steam pipe, 70NaN0 in diameter, which led to the superheater header and multiple valve regulator located in the smokebox. The steam pipes from the header to each cylinder were 60NaN0 in diameter. The boiler was fitted with two large Pop safety valves mounted ahead of the firebox, one on either side of the boiler and angled about 80 degrees apart.[1] [3]
The firebox had a power-operated Ajax fire-door and the grate was of the sectional pin-hole type, fitted with power-operated shaking gear. To assist in keeping within the axle load limits, the ashpan was constructed of relatively thin anti-corrosive steel plates of a special heat-resisting quality. The brick arch was supported by five 30NaN0 diameter arch tubes. The firebox was fitted with SAR standard type flexible stays and to allow easier access to the stays, the engine was equipped with a Watson cab with its slanted front which, like the Watson Standard boiler, was to become the standard on later SAR steam locomotive classes. The cab was of special light steel and was welded throughout.[1] [4]
The Class 16E Pacifics were placed in service at Kimberley and regularly worked trains like the Union Express and Union Limited southward to Beaufort West and northward to Johannesburg respectively. The Union train was to become the Blue Train after the Second World War. Although the locomotives were never stationed at Braamfontein Loco in Johannesburg, they were serviced there in the process of working between Kimberley and Johannesburg.[3]
They proved to be very successful, efficient and economical in service when handling loads within their capacity. When the original wooden-bodied coaches of the Union trains were replaced with heavier steel-bodied air-conditioned coaches in 1939, however, the load increased to 6000NaN0 or more and the Class 16E was considered to be inadequate to the task and relocated to Bloemfontein in the Orange Free State.[1]
From here, they hauled regular passenger trains, including the Orange Express, working north to Johannesburg and south to De Aar as well as across to Kimberley. When air-conditioned lounge cars were added to trains like the Orange Express and Trans-Karoo, they were again considered not powerful enough for the additional load and were eventually withdrawn from service in 1972.
When Watson retired in 1936, no. 858 was officially named after him. It carried the name Allan G Watson above its number plates on the cab sides. By the time the Class 16E was withdrawn from service, this engine bore the name Betty below the headlight.[3]
Two locomotives survive and were still relatively intact by 2015. No. 858 Betty was stored in the open at Beaconsfield in Kimberley while no. 857 Ann Smith • Bloemfontein Queen was in storage at Bloemfontein, parked under cover at the locomotive depot.
| Number | Works no. | THF / Private | Leaselend / Owner | Current Location | |
|---|---|---|---|---|---|
| 857 | Hensc 22586 | THF | Transnet Heritage Foundation (Museum) | Bloemfontein Locomotive Depot | |
| 858 | Hensc 22587 | THF | Steamnet 2000 | Kimberley Locomotive Depot |
A 20c postage stamp depicting a Class 16E locomotive was one of a set of four commemorative postage stamps issued by the South African Post Office on 27 April 1983 to commemorate the steam locomotives of South Africa that were rapidly being withdrawn from service at the time. The artwork and stamp design was by the noted stamp designer and artist Hein Botha. The locomotive depicted was Class 16E no. 858. The outline of a traditional SAR locomotive number plate was used as a commemorative cancellation for De Aar on the date of issue.[5]
Class 16E locomotives were equipped with smoke deflectors in later years.