| CSAR Class 10-2 4-6-2 Superheated South African Class 10B & 10BR 4-6-2 | |
| Hatnote: | ♠ Class 10B as built with a Belpaire firebox Class 10BR rebuilt with a Watson Standard boiler |
| Powertype: | Steam |
| Designer: | Central South African Railways (G.G. Elliot) |
| Builder: | North British Locomotive Company Beyer, Peacock & Company |
| Ordernumber: | BP 0268 |
| Serialnumber: | NBL 18976-18980 BP 5483-5487 |
| Buildmodel: | CSAR Class 10-2 |
| Builddate: | 1910-1911 |
| Totalproduction: | 10 |
| Whytetype: | 4-6-2 |
| Driver: | 2nd coupled axle |
| Leadingdiameter: | NaN0NaN0 |
| Coupleddiameter: | 620NaN0 |
| Trailingdiameter: | 330NaN0 |
| Tenderdiameter: | 340NaN0 |
| Wheelbase: | 55feet |
| Engine Total: | 30feet |
| Leading: | 60NaN0 |
| Coupled: | 10feet |
| Tender Total: | 16feet |
| Tenderbogie: | 4feet |
| Over Couplers: | 63feet |
| Height: | ♠ 12feet 12feet |
| Frametype: | Plate |
| Axleload: | ♠ 15lt 16lt |
| Leadingbogie/Pony: | ♠ 14lt 15lt |
| Coupled 1: | ♠ 15lt 15lt |
| Coupled 2: | ♠ 15lt 16lt |
| Coupled 3: | ♠ 15lt 16lt |
| Trail Bogie/Pony: | ♠ 12lt 13lt |
| Tenderbogieload: | Bogie 1: 24lt Bogie 2: 25lt |
| Tenderaxle: | 12lt |
| Weightondrivers: | ♠ 47sigfig=4NaNsigfig=4 48lt |
| Locoweight: | ♠ 74lt 76lt |
| Tenderweight: | 49lt |
| Locotenderweight: | ♠ 123lt 125lt |
| Tendertype: | XM2 (2-axle bogies) XC, XC1, XD, XE, XE1, XF, XF1, XF2, XJ, XM, XM1, XM2, XM3, XM4, XP1, XS permitted |
| Fueltype: | Coal |
| Fuelcap: | 101NaN1 |
| Watercap: | 4000sigfig=3NaNsigfig=3 |
| Fireboxtype: | ♠ Belpaire - Round-top |
| Firearea: | ♠ 35square feet 36square feet |
| Boiler: | Watson Standard no. 1 |
| Pitch: | ♠ 7feet 80NaN0 |
| Diameterinside: | ♠ 4feet 50NaN0 |
| Lengthinside: | ♠ 18feet 17feet |
| Smalltubediameter: | ♠ 92: NaN0NaN0 76: NaN0NaN0 |
| Largetubediameter: | ♠ 18: NaN0NaN0 24: NaN0NaN0 |
| Boilerpressure: | ♠ 1800NaN0 |
| Safetyvalvetype: | ♠ Ramsbottom Pop |
| Feedwaterheater: | Trevithick exhaust steam type |
| Totalsurface: | ♠ 1588square feet 1620square feet |
| Tubearea: | ♠ 1463square feet 1497square feet |
| Fireboxarea: | ♠ 125square feet 123square feet |
| Superheatertype: | Schmidt |
| Superheaterarea: | ♠ 3843NaN3 3663NaN3 |
| Generator: | Pyle National Turbo |
| Cylindercount: | Two |
| Cylindersize: | ♠ 200NaN0 bore ♠ 280NaN0 stroke |
| Valvegear: | Walschaerts |
| Valvetype: | Piston |
| Coupling: | Johnston link-and-pin AAR knuckle (1930s) |
| Tractiveeffort: | ♠ 24390lbf @ 75% |
| Operator: | Central South African Railways South African Railways |
| Operatorclass: | CSAR Class 10-2 SAR Class 10B & 10BR |
| Numinclass: | 10 |
| Fleetnumbers: | CSAR 670-674 (NBL) SAR 752-761 (NBL & BP) |
| Deliverydate: | 1910-1912 |
| Firstrundate: | 1910 |
| Withdrawndate: | 1974 |
| Notes: | The 2nd coupled axle had flangeless wheels |
The South African Railways Class 10B 4-6-2 of 1910 was a steam locomotive from the pre-Union era in Transvaal.
In March 1910, the Central South African Railways placed ten Class steam locomotives with a 4-6-2} Pacific wheel arrangement in service, of which five were built with and five without superheaters. In 1912, when the five superheated locomotives were assimilated into the South African Railways, they were renumbered and designated Class 10B. During 1912, the South African Railways placed five more Class 10B locomotives in service.[1] [2]
Ten heavy 4-6-2 passenger locomotives, designed by Central South African Railways (CSAR) Chief Mechanical Engineer G.G. Elliot and based on the Class 10 design of his predecessor, CSAR Chief Locomotive Superintendent P.A. Hyde, were ordered from the North British Locomotive Company and delivered in 1910. They had plate frames, Belpaire fireboxes and Walschaerts valve gear and were delivered in two variants, with five of them using saturated steam while the rest were superheated with Schmidt type superheaters. They were all designated Class 10-2 by the CSAR, numbered in the range from 665 to 674, and entered service in March 1910.[1] [3]
The Class 10-2 superheated locomotives were similar to the Class 10, except that their boilers were arranged NaN0NaN0 further forward and their firebox throats and back plates were sloped instead of being vertical. This modification brought the chimney in line with the cylinders and avoided a "set" in the blastpipe. The cylinders were arranged outside the plate frames. Like the Class 10, the locomotives had 620NaN0 diameter coupled wheels, the largest yet used in South Africa at the time.[1]
The Walschaerts valve gear was controlled by a vertical type of steam reversing engine which was attached to the right-hand side of the boiler, just below the dome. It consisted of a NaN0NaN0 diameter steam cylinder and a 40NaN0 diameter oil cylinder, fitted with a common piston rod with a crosshead which was machined integral with the piston rod. This crosshead was connected to a lever fitted to the reversing shaft. After 1912, these reversing engines were replaced with Hendrie steam reversers.[1]
While the Class 10 had outside admission valves, the Class 10-2 superheated used inside admission piston valves. Two Trevithick exhaust steam feedwater heaters were mounted on the running boards on either side of the smokebox above the cylinders and a Weir's feedwater pump was mounted on the left-hand side of the firebox. Each feedwater heater cylinder was 1feet external diameter and 5feet between tube plates, and contained 108 NaN0NaN0 external diameter brass tubes. The feedwater heaters and the feedwater pump were removed after a few years, since the feedwater heater tubes proved to be troublesome to clean.[1]
A Wakefield mechanical-feed lubricator was arranged on the right-hand side running board and was operated through a lever and crank, actuated from the crosshead. Mechanical lubricators had the advantage that the rate of oil-feed was always proportional to the speed of the engine. This type of oil-feed was later superseded for the sight-feed lubricator.[1]
The engines were fitted with the Flaman speed recorder, of which the driving gear was connected to the right trailing crank pin. The records obtained from these indicators were of considerable value when operating fast passenger services. The sand boxes were arranged in front of the leading coupled wheels and fitted with steam sanding gear, which was later found to be an unnecessary refinement for South African conditions.[1]
The Schmidt type superheater consisted of a series of elements in eighteen NaN0NaN0 external diameter flue tubes, arranged in three rows. These elements were connected to a superheater header, fitted in the upper portion of the smokebox. The flue tubes were expanded into the firebox and smokebox tube plates in a special manner which was subsequently found to be unnecessary. Each tube contained a superheater element consisting of four NaN0NaN0 diameter steam tubes.[1]
The construction of the header and its connections to the steam pipe and steam chest were such that steam had to pass through the elements on its way from the boiler to the cylinders. The flow of heat through the large superheater flue tubes was controlled by damper doors (marked "D" in the diagram), hinged or pivoted below the header in the smokebox. The damper doors were actuated by a small automatic steam cylinder and piston attached to the outer shell of the smokebox. While the regulator was shut, the dampers were kept closed by a counterweight fitted to a crank. When steam was admitted, the dampers were immediately opened simultaneously. The dampers could also be manually operated from the footplate, independently of the automatic cylinder.[1]
The primary reason for dampers was to prevent the elements from possible overheating and damage while the regulator was closed. Once experience showed these precautions to be unnecessary, all such dampers were discarded.[1]
In service, it was found that the superheated locomotives could handle almost 25% more load than their saturated steam sister engines, so much so that double-heading of passenger trains in the Orange Free State became unnecessary with the Class 10-2 superheated locomotive.[1]
When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (Cape Government Railways, Natal Government Railways and CSAR) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways were only implemented with effect from 1 January 1912.[2] [4]
When they were assimilated into the South African Railways (SAR) in 1912, the five saturated steam locomotives were designated Class 10A, while the five superheated steam locomotives, numbered in the range from 670 to 674, were designated Class 10B and renumbered in the range from 752 to 756.[2]
During 1911, the CSAR had ordered a further five superheated Class 10B locomotives from Beyer, Peacock & Company. These were delivered to the SAR in January 1912 and numbered in the range from 757 to 761. The engine numbers of these five were out of sequence with their builder's works numbers.[2] [5] [6]
Unlike the earlier engines, these last five locomotives were built without feedwater heaters. Their Pyle National Turbo-generators were arranged on top of the last boiler barrel course instead of in front of the chimney and behind the headlight.[5]
During the 1930s, many serving locomotives were reboilered with a standard round-topped boiler type designed by then Chief Mechanical Engineer A.G. Watson as part of his standardisation policy. Such Watson Standard reboilered locomotives were reclassified by adding an "R" suffix to their classification letter.[7]
Five of the Class 10B locomotives were eventually reboilered with Watson Standard no. 1 boilers and reclassified to Class 10BR. In the process, their boiler pitch was raised by 80NaN0. Fitting them with the new boilers required minimal modifications, such as fitting a new cab front. At the same time, the steps leading to the cab were removed from the tender and attached to the engine.[5] [7]
Their original Belpaire boilers were fitted with Ramsbottom safety valves, while the Watson Standard boiler was fitted with Pop safety valves. An obvious difference between an original and a Watson Standard reboilered locomotive is usually a rectangular regulator cover, just to the rear of the chimney on the reboilered locomotive. In the case of the Class 10BR locomotives, an even more obvious difference was the absence of the Belpaire firebox hump between the cab and boiler on the reboilered locomotives.[7]
The table lists the locomotive builders, works numbers, CSAR to SAR renumbering and the Watson Standard boiler reclassification for the Class 10B and 10BR locomotives.[2]
Builder | Year | Works No. | CSAR No. | SAR No. | Class |
|---|---|---|---|---|---|
| North British Locomotive Company | 1910 | 18976 | 670 | 752 | 10B |
| North British Locomotive Company | 1910 | 18977 | 671 | 753 | 10BR |
| North British Locomotive Company | 1910 | 18978 | 672 | 754 | 10BR |
| North British Locomotive Company | 1910 | 18979 | 673 | 755 | 10B |
| North British Locomotive Company | 1910 | 18980 | 674 | 756 | 10BR |
| Beyer, Peacock & Company | 1911 | 5483 | 757 | 10B | |
| Beyer, Peacock & Company | 1911 | 5484 | 758 | 10BR | |
| Beyer, Peacock & Company | 1911 | 5486 | 759 | 10BR | |
| Beyer, Peacock & Company | 1911 | 5487 | 760 | 10B | |
| Beyer, Peacock & Company | 1911 | 5485 | 761 | 10B | |
The Class 10B was placed in service to haul passenger trains out of Johannesburg. On the fast trains running between Pretoria and Johannesburg, the scheduled time of 1 hour 15 minutes was maintained daily and the 36miles between Pretoria and Germiston were covered at an average speed of 37.30NaN0 in both directions.[5]
Most of their working lives were, however, spent on the Cape Midland system, where they were used on the mainline out of Port Elizabeth. Two of them worked as station pilots at Kimberley until 1960, when they joined the rest of the Class which were by then working the suburban between Port Elizabeth and Uitenhage.
In later years, they also served on the Reef's suburban routes, while a few were used in the same service around Cape Town until they were eventually relegated to shunting work. They were scrapped in 1974.
Of the Class 10BR,three survived into preservation.
| Number | Owner | Current location | |
|---|---|---|---|
| 750 | Transnet Heritage Foundation | Roodepoort Station | |
| 756 | Transnet Heritage Foundation | Kroonstad Station | |
| 758 | Uitenhage Railway Museum | Uitenhage Railway Museum |